New Electrical Equipment & Systems Products

Vertical Pump Motor directly replaces less efficient motors.

Mod-Max meets NEMA premium motor efficiency standards, operates 0.8 to 4.0% more efficiently than company's older, less efficient motors, and can be used for VFD applications. Canopy cap requires no gasket and has 3 stand-offs to allow air circulation to help prevent moisture condensation. Winding includes pulse endurance wire. Each winding is also treated with 100% solids insulation material....

Vinyl Caps includes high temperature-resistant models.

Flexible vinyl caps can be applied quickly, fit snugly, and will not split or crack. Dip molding production process for protective caps allows any size, style, and color design to be made. Insulation qualities of vinyl promote resistance to weather, moisture, and chemicals. Vinyl caps are suitable for protecting, masking, decorating, color-coding, and sealing threads, bolts, tubes, studs, and...

DC/DC Converters feature isolated output.

5E Series offers input voltage ranges of 9-18, 18-36, and 36-72 Vdc. Units are available with single, dual, and triple low rippled regulated outputs. CMOS/TTL compatible remote On/Off control allows converter output to be turned on or off as necessary. 25/30 watt converters feature continuous short circuit protection and do not require heat sink. They have 6-sided shielding and can achieve...

Encoders are available with connectors.

Accu-Coder(TM) Cube Series and model 702, 725, 758, and 225 encoders are available with Eurofast connector. Connector allows user to reduce stocking requirements for cord sets and similar components since cords can be used for encoder connections and other components of motion control systems (such as proximity sensors and photoelectric switches).

Process Piping: Everything You Need & Should Know

Learn how process piping differs from other systems, key considerations, and how it's applied in different systems.

DC/DC Converters accept wide range of dc inputs.

WD Series 10W dual output dc/dc converters have 4:1 dc input range to accommodate 12 V battery, 24Vdc industrial, and 48V telecom power sources. 3 models have input range from 9-36 Vdc, and 3 models have 18-72 Vdc input range. Outputs are Ã-

Welding Products include power sources, drives, and feeders.

CST(TM) 250 Stick/TIG power source provides 250 A for stick and TIG welding. CST Rack for multiple operators can hold up to 4 welding units. Bobcat(TM) 250 NT engine driven welding generator's rated output in CC/DC/AC mode is 250 A at 25 V, 100% duty cycle. 70 Series constant-speed wire feeders are available in bench-top, boom-mounted, and single- and dual-wire configurations.

Motor Starters are rated for hazardous locations.

Nelson combination starters are designed for starting and stopping single-speed, non-reversing squirrel cage motors at full voltage, utilizing either automatic or manual control. They protect against dangerous short circuits, while also serving as disconnect. Starters are built from copper-free cast aluminum with corrosion-resistant gray vinyl finish, and stainless steel cover bolts with captive...

Programming Port provides access in hazardous areas.

Graceport M7 Series Div 1 hazardous location interface eliminates need to remove all bolts from NEMA 7-9 enclosure to gain programming access to devices inside. Instead, interface is installed with conduit connection to nearby NEMA 7-9 enclosure containing programmable device. Personnel obtain hot work permit and perform sniff test before programming.

Circuit Monitor detects oscillatory and impulsive transients.

POWERLOGICÃ-® Series 4000 permanently mounted circuit monitor with transient detection (CM4000T) automatically generates alarm so that action may be taken to correct problems before facility shuts down. It detects and captures oscillatory and impulsive transients (up to 10,000V peak, line-to-line) as short as 1 microsecond in duration. CM4000T maintains historical record of number of...

Single Hybrid Transformer has hipot rating of 1,500 VAC.

SPT-060 600ohm:600ohm transformer connects 2-wire port to 4-wire transmit and receive port. In single hybrid configuration, it delivers 35.0 dB minimum TransHybrid Balance over frequency range of 300 to 3500 Hz. SPT-060 meets FCC Part 68 longitudinal balance requirements. It has dimensions of 0.540 in. max length x 0.535 in. max width x 0.535 in. max height. Printed circuit board usage is minimal...

Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier

Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.