New Electrical Equipment & Systems Products

Flow Switch features in-line design.

FS-380P is constructed with polypropylene housing, PPS composite pistons, 316 wetted parts, and fluorocarbon O-rings. Operating pressure is 200 psi @ 70 deg F and 100 psi @ 212 deg F. Fixed set points range from 0.25 to 2.0 gpm. Switch is offered with 3/8 in. MNPT or quick disconnect ports and selection of mating connections including NPT, BSP, barb, and tube connections. Switch action is SPST 10...

DC/DC Converter delivers 60 watts of power.

Dual-output, quarter-brick Model AEQ15AF48 has 5 V output that delivers up to 12 A, and 3.3 V output that provides up to 15 A. With operating efficiency near 90%, converter delivers 60 W of output power in any combination demanded by two loads. It has input range of 36 to 75 V, output voltage trim adjustment, positive or negative logic-enable, input-control pin, under-voltage lockout, and...

Connector System separates liquids from electronics.

Sealed Mini Universal MATE-N-LOK(TM) wire-to-wire and wire-to-board connector system is splash-proof, and available as dual-row product in 2 to 10 positions. Connectors employ positive, polarized keys with latching orientations. Cycle durability is rated at 20 with contact retention of at least 8 lbs per contact. Housings are molded UL94V-0 nylon. Contacts are brass with pre-plated tin or duplex...

Cordsets operate in washdown environments.

microfast(R) cordsets with 1/2-20UNF nylon coupling nuts offer chemical resistance when used in applications with petroleum products such as naphthalene, xylene, cutting fluids, hydraulic fluids, and gear oils. Nylon coupling nuts provide weather resistant connection that is chemically resistant to compounds including ammonium chloride, benzene, ethers, and alcohol. Cordsets have NEMA 1, 3, 4, 6,...

Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications

This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.

Portable Inverter suits TIG welding applications.

Pro-Wave(TM) 300GTSW AC/DC inverter offers full range capability from 300 to 5 amps. It includes Smart Logic(R) input voltage protection, Easy Link flip-of-a-switch voltage selection, and electronic input circuit protector. Inverter produces 200 A output from 50 A of single phase, 230 Vac input. Spot timer ranges from 0.5 to 5.5 sec, and pulse control ranges from 0.5 to 500 pps. Hot start stick,...

DC/DC Converter offers wide input and output ranges.

APC08 3.3 V, 25 W Point-Of-Load converter delivers 8 A of regulated power to its load at 89% efficiency. Housed in Surface Mount Device package, unit is only 0.53 in. x 1.3 in. x 0.33 in. tall. It offers input range of 1.8 to 13 V and output range of 0.9 to 3.6 V. Wide operating temperature of -40 to 85 deg C makes converter suitable for data and telecommunications applications, including...

AC/DC Power Supplies have 0 to 50 deg C operating range.

DMS-PS-CM Series AC/DC instrumentation power supplies accept universal AC inputs (85 to 264 Vac @ 47 to 63 Hz) and deliver 5, 12, and/or 24 Vdc outputs from single, dual, or triple-output configurations. They offer output noise rated to 40 mVp-p on main output and 8 mVp-p on auxiliary outputs. Supplies feature built-in line fuses and on-board LED indicators. Hold-up time with 120 Vac input is 20...

Pressure Switches meet ASME code requirement.

HPS Pressure Switches have 1/8 in. NPT side connection port, DIN connector with 1/2 in. conduit connection, and Buna-N diaphragm. They are NEMA 4X (IP65) rated with safe working pressure of 400 psig and ambient temperature range of -20 to 125 deg F. SPDT units offer 5A@120/240 Vac, 12/24 Vdc operation. They are UL listed and CSA recognized.

Ballast Replacement Kits fit HID applications.

Suitable for metal halide and high pressure sodium lamps, 5-TAP ballast replacement kits include pre-insulated lead for use on each of five U.S. voltage systems: 120, 208, 240, 277, and 480 V. Pre-insulated leads for each voltage tap help assure safety and eliminate need to terminate unused leads with wire nuts. All necessary mounting hardware and detailed instructions are included with each kit....

Liquid Level Switches replace float type level devices.

POINTSENSE(TM) LL-10 switches utilize ultrasonic technology and surface mount integral electronics to provide high and low level alarm, pump protection, and auto fill/auto empty operation. They are available in 316SS and Tefzel(R) materials. Electronics provide 6 to 30 Vdc input power with transient reverse polarity protection. Outputs include 2-wire loop power type, relay, and source or sink...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.