Generator adds additional power to boom lifts.
SkyPower(TM) generator provides 7,500 W of 110 or 220 Vac power at platform for added work efficiency. Power cable is routed from base-mounted generator through boom power track to GFIC outlet in platform. Air line is also routed through power track for operation of pneumatic tools or pressure washers. SkyPower is available on boom lifts with platform heights ranging from 40 to 135 ft.
Read More »
Power System incorporates lighting into boom lifts.
Sky Bright(TM) package uses 4 or 6 lights on platform to turn boom lift into 6,000 watt light tower. Power is provided by SkyPower(TM) generator delivering up to 7,500 W of 110 Vac power. Nite Bright(TM) accessory has four 40 watt lights mounted on chassis, and two 40 watt lights mounted on platform for work in low light conditions. Both options are available on boom lifts with platform heights...
Read More »
Linear AC Power Sources provide 500 VA to 12 kVA.
Low distortion AMX Series produces single-phase, split-phase, or 3-phase power. Select models may be connected in parallel to provide up to 30 kVA. Units combine broad, 50 kHz small-signal bandwidth with peak to RMS current ratio of 4-6:1. They feature continuous self-calibration and programmable output impedance. AMX Series can be configured with manual or programmable controllers.
Read More »
Shielded Cable provides protection against EMI/RFI.
Shielded Cat5E350 patch cord twisted pair assemblies meet 568-A-4 and Cat5E350 network cabling requirements from TIA/EIA, making them suitable for LAN and high bandwidth multimedia applications. Each cable is tested to 350 MHz to guarantee enhanced ACR, NEXT, and PS- NEXT performance, and each has high resolution cable legend on jacket, allowing user to identify cable for installation and cable...
Read More »
Choosing the Right Material for Your Project
When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium
Read More »Brushless DC Motors employ ring type neodymium magnets.
NT Dynamo(R) modular type, brushless DC motors are suited for applications that require integrated variable speed control and 5 to 70 oz-in. continuous torque. They offer integrated digital drives designed for continuous duty, 3 levels of drive performance, optical encoder, computer communications, and NEMA 23 mounting. Motors handle input voltage ranges of 10 to 48 Vdc, with output speed ranges...
Read More »
DC-DC Converters provide single output with >85% efficiency.
TCPDC Series 600 watt converters have input voltages of 22 to 32 and 42 to 56 Vdc, and outputs of 5, 12, 24, and 48 V up to 600 W. Units are over load, over voltage, and over temperature protected. They include remote turn-on/turn-off and DC-operated ball bearing fan. Operating temperature range is 0 to 55 deg C. Hot swap/rack mount options are available. Applications include telecommunications,...
Read More »
Power Connectors link industrial machinery.
HTS pin-and-socket connectors are comprised of outer shell, mated pair of contact inserts, and contacts. Outer shells are die cast aluminum or zinc and are available with several latching mechanisms. Shell sizes accommodate contact ranges from 3 to over 100. Shell styles include surface mount, panel mount, and inline. Most inserts are suitable for 10 to 150 A. They are UL, CSA, and SEV approved....
Read More »
Battery Packs have on-board charging circuits.
Li-Ion Battery Packs provide 5 times the energy density of NiCad packs for comparable size, and can be made in cylindrical, prismatic, and coin cell configurations, with capacities ranging from 500 mA to 20 A. On-board circuitry gauges charge, temperature, and remaining run time. Options include flying leads, pressure contacts, and solder-, surface mount-, and quick-connect connectors. Battery...
Read More »
Crosspoint Switches operate up to 3 Gpbs from 2.5 V supply.
SY55854U 3Gbps single 2x2 CML switch, in 16-pin QSOP package, operates from supply voltage as low as 2.3 V. Output channel-to-channel skew is guaranteed to be less than 15 ps over temperature and voltage. SY55858U and SY55859L dual 2x2 CML switches come in 32-pin TQFP and 32-pin MLF packages, respectively. SY55858U includes flexible, 3-pin input stage. SY55859L operates up to 2.7 Gbps and...
Read More »
Brushes prepare surfaces for finishing.
Fiberglass brushes roughen surfaces to enhance adhesion of solder, paint, and epoxy. Other uses include cleaning electrical contacts, removing rust, removing epoxy and paint, and cleaning injection molds and foil stamping dies. Brushes are suitable for use in printed circuit board industry for PC board rework, including flux removal, edge connector cleaning, trace cleaning for soldering, and...
Read More »
ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »
