New Electrical Equipment & Systems Products

Switching Power Supplies provide 25 to 320 watts output.

A Series enclosed AD/DC power supplies accept universal input from 85 to 265 Vac. Models provide single/dual/triple/quad outputs from 5 to 48 Vdc. All have soft-start circuitry, integral EMI filtering, power-good LED indicator, and output adjustment potentiometer. Units operate over ambient temperature range of -10 to 60 deg C, and include overvoltage and short circuit protection.

Rackmount Enclosures provides 2 slots in 1U chassis.

PRME Series horizontal rackmount enclosures are designed to cool cards dissipating 55 W per slot. CoolSlot(TM) card guides eliminate cooling dead spots on boards and provide uniform airflow throughout system. Thermal CFD simulation demonstrates 400 LFM per front slot and 100 LFM per rear transition module slot. Two-slot CompactPCI(R) or VME backplanes are available. Power is provided by embedded...

Stepping Motors have high torque density.

PK Series miniature 2-phase hybrid devices are available in 2 frame sizes: 1.1 and 1.38 in. sq. Smaller model is available in lengths of 1.26, 1.57, and 2.03 in. that produce holding torques of 9.2, 13.7, and 16.6 oz-in. respectively, in bipolar excitation mode. It reaches shaft speeds of 4,000 rpm. Larger model is available in lengths of 1.46 and 2.05 in. with holding torques of 28 and 54...

Power Equipment corrects power factor.

Cutler-Hammer Power Factor Correction line, including harmonic filter products, is available for voltage ranges 240 Vac to 115 kVac and kVAR ratings from 1 to 15,000. Equipment reduces power factor penalties, increases load capacity, and regulates voltage. Line can be used with company's low- and medium-voltage electrical distribution equipment, or retrofitted into any existing power equipment....

Caps & Plugs Designed for Peace of Mind

Download this engineering guide to learn more about the different caps and plugs offered, and to find the correct solution for your specific application.

Insulator Material guards against humidity.

Voltoid(TM)D-800 resin-bonded, cellulose-fiber composite can be fabricated into gaskets, insulators, lead separators, backing-plate barriers and other electrical insulation configurations. It is recognized by Underwriters Laboratories for continuous use as electrical and mechanical barrier to 105 deg C. Insulator is available in sheets in thicknesses of 0.031 to 0.125 in. It is easily fabricated...

Physical Layer Switch provides interoperability.

IntellaPatch FC32 is a 2 Gigabit Fibre Channel layer 1 switch that automates electronic cable pull simulation. It comes with 32 ports that use small form-factor pluggable transceivers. Users can store up to 16 frequently used configurations in non-volatile memory. Switch connects to Ethernet network, allowing users to remotely control up to 32 independent physical layer switches from single...

Terminal Blocks feature double solder tails.

8152 Series modular spring clamp PC board terminal blocks are UL rated for 300 V, 10 A for 26-14 AWG wire sizes. Termination points are linked by common current carrying bar providing in-line current continuity. Horizontal and vertical versions both provide top mount termination points for easy access wiring.

Power System incorporates welder into boom lifts.

SkyWelder(TM) system features Miller(R) Model CST 250 welder, which has 5 to 250 amp range and can be used for stick and TIG welding applications. Power leads run through boom's power track to 7,500 W generator mounted in engine compartment which supplies power to welder and to 110 Vac platform receptacle. Welder is integrated into boom lift's platform beneath the control panel. Available on...

Electric Generator produces 6,100 W.

DP6000 can run for 12 hr at half load and 9 hr at full load. It has electric start 12-hp Kohler engine with cast-iron cylinder sleeve and quiet muffler. Low-oil shutoff helps extend life while automatic idle control provides better fuel economy and helps prevent surges when operating power tools. It has maintenance-free, brushless alternator; GFCI protection; hourmeter; and overload indicator....

Power Entry Module exceeds power limits.

EF Series includes AC inlet and circuit breaker, UL rated up to 20 A at 250 V. Circuit breaker provides manual reset of circuit and status indication depending on switch position (I/O). It is recessed in flange to protect against inadvertent actuation. Filter options meet standard and medical grade attenuation requirements at 12, 16, and 20 A. Direct electrical contact of filter to chassis...

Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard

Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.