New Machinery & Machining Tools Products

Auto Drills make holes without using air motors.

Series 1000 features adjustable, high-speed dc motors capable of up to 11,500 rpm, making units suited for drilling small holes without noise and wasted energy of air motors. Measuring approximately 4 x 4 x 14 in., drills are rated for use on woods, plastics, and metals. They can be used in combinations for complex patterns or production drilling operations where multiple spindle drilling heads...

Vertical Machining Center is operated by digital control.

With heavily ribbed cast iron construction used throughout, VMC760XP3 incorporates guideways with minimal overhang, dual-ball linear guides, and 45 mm ballscrews. It features 30 x 24 x 24 work envelope with rapid traverse rates of 1,690 ipm on X and Y axes and 1,410 ipm on Z axis. In addition to SKF 40-taper, 12,000 rpm spindle that offers face and taper contact, VMC offers thermal compensation,...

Walk-Behind Concrete Grinder offers ergonomic operation.

Equipped with diamond grinding wheel, EBS 125 walk-behind, 5 in. concrete grinder removes epoxy, paint, and other coatings. It performs concrete finishing and surface preparation with 14 A motor. Walk-behind cart eliminates need to bend over and work on hands and knees. Power outlet on cart accommodates grinder plug, letting user activate grinder via on/off switch on cart handle. Grinder can also...

Laser Adapter converts spot into line.

Intended for Series 150 and 206 laser diode modules, Model LO-X facilitates edge detection, straight edge determination, and almost any alignment application. Line adapter is offered in 4, 45, 60, and 90Ã-

Epoxy Crusher Backing Solutions for Construction Aggregate & Ore Mining Applications

This white paper provides a guide to epoxy crusher backing solutions for construction aggregates and ore mining applications.

Miter Saw crosscuts material 12-½ in. wide and 4-¾ in. high.

KGS 305 12 in. Dual Bevel Sliding Compound Miter Saw features cutting depths of 4Ã-¾ in. at 90Ã-

Refractory Castable offers alternative to 1:2:4 field mix.

Offering quality control from raw material specifications to manufacturing process, Kaolite 1:2:4 is tested by outside testing lab for standard quality conformance. Product, which can be gun or cast, is comprised of 1 part Lumnite or other mid-grade calcium aluminate cement; 2 parts haydite, expanded shale; and 4 parts vermiculite. Physical properties include 48-56 lb/ft-³ density and 400-500...

Connectors and Prep Tools facilitate cable installation.

Designed for use with LMR-240 low loss cable, ST-240EZ tool prepares cable to exact dimensions in one step, while DBT-02 tool removes burrs from exposed center conductor. EZ non-solder connectors, which include QMA male, QMA male RA, SMA male, SMA male RA, and N male types, are supplied with adhesive-lined ATUM boot. Optimized to facilitate termination, all connectors are suited for use in True...

Thermal Surface Absorbing Head offers low power measurements.

Featuring flat spectral response from 0.19-2.5 Ã-µm, Model 3A-FS can supply CW and pulsed measurements of 40 Ã-µW to 3 W and 7 Ã-µJ to 2 J. Unit is suited for applications that require very low power and/or energy measurements on lasers down to tens of microwatts. Additional features include power density of 200 W/cmÃ-², power noise level of 2 Ã-µW, response time of 1.5 sec,...

Utility Keyway Broach Set cuts standard metric keyways.

Designed to cut ISO standard metric keyways in commonly encountered, metric size bores, Minute Man No. 80 Keyway Broach Set contains 3 broaches and 12 bushings that can be used interchangeably to cut 10, 12, or 14 mm keyways in 12 bore sizes from 32-52 mm. Steel, push-type broaches can be used with any hand-operated arbor press or hydraulic press with adequate throat depth. Product is suited for...

Triple-Axis CO2 Laser cuts at rates to 1,575 ipm.

Featuring bridge-type construction and flexibility of dual pallet changer, TLZ Series includes TLZ-408 with 98 x 49 in. cutting stroke and TLZ-510 with 122 x 61 in. axis movements. Traverse speeds of 3,937 ipm for X and Y axes and 2,362 ipm for Z axis are kept in check with ac servo drive motors, ball screw, and linear ball guide mechanism for precise, controlled movements. Laser power options...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.