New Machinery & Machining Tools Products

NEW - R50H Horizontal Machining Module

SCHAUMBURG, IL, June 26, 2006 - Enshu will be exhibiting the new R50H Horizontal Machining Module at the International Manufacturing Technology Show (IMTS) 2006, September 6-13 at McCormick Place in Chicago, Illinois. Everyone is invited to booth #8242 to see the R50H module in action. The new R50H module on display features a high torque 4,000 RPM gear driven 25 HP spindle with 16-tool HSK100A...

Horizontal Machining Center is designed for milling.

Designed for Lean lines, agile lines, flexible transfer lines, and standalone application deployment, JE30SL utilizes BT/BIG Plus 30 taper, 13,000 rpm spindle that accelerates from 0-13,000 rpm in 0.38 sec and performs rigid taps up to 8,000 rpm. Machine features 20 x 16 x 16 in. travels and 2,362 ipm rapid traverses with 1.5 g acceleration and deceleration. It comes with rotary pallet changer,...

Five-Axis HMC is capable of automated operation.

Equipped with Fanuc 18iMB5 control capable of simultaneous 5-axis contouring, JE50S B/A has 20 in. working envelope and 2,362 ipm rapid traverse rates. It features BT/BIG Plus 40 taper spindle as well as rotating and tilting work table with 32 mm faceplate. Automatic tool changer, mounted over top of spindle, has 40-tool capacity. Other features include 12,000 rpm, 20 hp, direct-coupled spindle;...

Manual Plasma Cutting Machine operates on 110/115 V input.

Weighing just 16 lb, HandyPlasma 250 cuts up to Ã-¼ in. carbon or stainless steel and is portable enough to travel to any job site. Single-phase unit produces 20 A at 20% duty cycle and comes complete with torch, spare parts, air filter/regulator, input power cord with plug, and work cable with clamp. Additional features include side-mounted pressure gauge and automatic air purge when unit...

How EDM Controls Ensure Aerospace Validated Processes

Download this white paper to learn more about how wire EDM systems are used to validate aerospace manufacturing processes.

Horizontal Machining Center offers 14,000 rpm spindle speed.

With 30 hp motor generating 161 ft-lb torque for cutting metals, DHP-4000 combines 1.5 sec tool-to-tool changes, 2,362 ipm rapid traverses, and 2-pallet, rotary shuttle system with 5.9 sec pallet change time. Work pieces up to 23.6 in. dia x 31.5 in., weighing up to 880 lb., are supported on 15.7 x 15.7 in. pallets. Table can be indexed in 1Ã-

Twin-Turret Turning Center has programmable tailstock.

PUMA TL-series features upper and lower turrets and programmable tailstock for parts 9.4 in. dia x 23.6 in. long. While model TL2000 accepts 2.6 in. dia barstock, TL2500 accepts barstock of similar or 3.0 in. dia and 39.3 in. lengths. Both models are designed for interrupted cutting. Their dual turrets house 20 tools total, with live tooling at any station, and servo drives reduce...

Turning Center has tool setter with4-position touch sensor.

Offered in 3 models with 6.5 or 8.25 in. chuck, Lynx 220 OD Turning Center is powered by 20 hp motor and features 30Ã-

Tipped Tooling suits high-production applications.

Designed for reaming, fine boring, and milling, MODCOÃ-® Tipped Tools can be engineered with steel or carbide bodies and are provided in any required diameter and length combination. PCD tips are available for aluminum and other non-ferrous material applications, while CBN tips are offered for iron jobs. Construction technique allows tools to be engineered with appropriate number of tips to...

Case Liner runs up to 18 cycles/min.

Superliner SL220 makes bags with adjustable length from rolls of continuous gusseted tubing. Bag is opened and placed into case, crate, drum, or tray with neck cuffed over edges, providing hygienic container ready for filling with food or non-food products. Along with stainless steel conveyor and Allen Bradley controls with self diagnostics, machine incorporates dual roll holder that facilitates...

Rotary Spindle enables EDM turning of microstructures.

Combination of Model H80R.MAC Rotary Spindle and Model H1680.AC4 variable-speed ac control enable production of miniature round parts. Contour shapes are programmed into EDM control, eliminating contoured wheels. Spindle and refined generator settings allow EDM turning of diameters down to .002 in. with surfaces to Ra 0,2. Applications include ejector pins for micro molds, miniature valve slides,...

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.