Milling Cutters work fast and efficiently.
Fix-Perfect aluminum milling cutter inserts have on-edge orientation and 34 deg positive rake angle. This geometry reduces insert edge buildup, improves tool life, and provides free cutting action that makes it possible to machine thin-walled parts. Inserts are available in uncoated, coated, and polycrystalline diamond versions.
Read More »Pipe Couplers form air-tight seal.
New-Matic fabric reinforced, elastomeric couplers inflate to seal around intake and discharge pipes including those that are bent and worn. Couplers have cast aluminum or stainless steel housing, accommodate pipes from 5 to 6 3/8 in., and require only 10 psi to seal. Applications include storage bins, hopper cars and trailers. Couplers provide effective way to control contaminants while adhering...
Read More »Stacked D-SUB has three mounting options.
PC99-colored D-SUB with plastic bracket is used with motherboards using ATX or Micro ATX configurations. It is available with parallel port atop two serial ports or one serial port and one VGA connector. It is also available with parallel port atop single serial port, which can be either left or right aligned. D-SUB is made of UL 94V-0 rated PBT thermoplastic; contact material is phosphor bronze...
Read More »SMT LEDs provide indicator and display lighting.
1206 LEDs are sized 3mm overall, with die face of 1.5mm. They are available in green with typical wavelength of 560nm and light output ranging from 6.0 to 12.0 mcd; yellow with wavelengths of 580 and 570nm and light output of 6.0 to 12mcd; and red with wavelength of 660nm and 33.6mcd light output. Voltage ratings are 2.1V for green and yellow units, and 1.7V for red.
Read More »Metal Stamping for Construction Tool Applications
Metal stamping is a highly versatile manufacturing technique, capable of producing quality components at tight tolerances.
Read More »Interface Units provide alternative to A/D cards.
TWI-FO and TWN-FO convert analog signal into linear, frequency output signal, with 50:50 mark space ratio. They are designed to be used with PLC to convert 4-20mA signal into 10-10Hz frequency, allowing direct connection into digital input on PLC powered by PLC's 24Vdc power supply. TWI-FF and TWN-FF are designed as interfaces between Trimec DP490 Flow Transducer and PLC. Output is 50:50 mark...
Read More »Analog Output Boards offer 3 modes of operation.
PowerDAS(TM) PAO-Series analog output boards keep users in control of their output waveforms, independently of speed or interrupt patterns of host CPU. They are pin-for-pin compatible with MetraByte(TM) DDA-16 cards. Operation modes include: Waveform Generation mode, Waveform Update mode, and Conventional Software mode. All boards provide 16 DIO lines and 3 counter-timers, with 8 to 96 analog...
Read More »Coaxial Surge Protector is suitable for wireless systems.
Model P8AX uses fast-acting gas tubes to provide protection against lightning surges and electrical transients for microwave, radio, antennas, GPS, and satellite and cellular-systems. N, BNC, TNC, SMA and 7/16 connectors are available. Protectors are available for 1 to 1,000 W and any frequency from dc up to 4 Ghz. They can be mouinted on cable assembly, through chassis of equipment to be...
Read More »Analog Output Boards provide high currents and voltages.
PD2-AO-32/16HC high-current board supplies 90 mA per channel continuously, while 16HV high-voltage version generates Ã-
Read More »Precision Core Pins are for luer taper applications.
Rosspunch pins are precision ground for injection molding of plastic luer taper components. Pins are custom made with tolerances to 0.0005 in. length and 0.0001 in. dia. in steps from 0.006 to 0.750 in. They can be made from all common tool and stainless steels in 0.250 to 10 in. lengths. Pins can incorporate ground ends with radii, flats, symbols and odd shapes. They can also be nitrided, TiN...
Read More »Surge Protector mounts on DIN rail.
Small and compact Model DS 150E heavy-duty ac power surge protector is suitable for wireless base stations, cellular sites and control/instrumentation equipment. It protects 1-phase 110-120 V and 220-250 V ac networks with 3 layers of MOVs and thermal fuses. Protector has power dissipation capability of 140 kA, comes with visual indicators and remote signaling, and is UL 1449 2nd edition-listed...
Read More »Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »