New Electronic Components & Devices Products

Digital Signal Controllers suit appliance motor controls.

Series 56F8000 is based on 56800/E core with 32 MIPS and single-cycle multiply accumulate execution. Units feature 96 MHz pulse width modulation with programmable fault capability, 12-bit ADC with 1.125 Ã-µsec conversion rate, 16 KB program flash memory, 4 KB program/data RAM, and up to 26 GPIO. In addition to motor controls, 16-bit DSCs are suited for digital power conversion applications...

LEDs offer color temperature control stability.

Rated for 350 mA operating current, EP4 series E-power LEDs are available as individual single-color LEDs in blue, green, amber, red, and cyan or as RGB package with color-changing capability. Products offer output intensity from 2-10 candelas and total flux from 4-20 lumens. With viewing angles of 90Ã-

Sampling Down Converter meets airborne/naval requirements.

Designed for use in high-end digital radar receivers, 7600 Down Conversion Sampling Module employs Non-Linear Transmission Line (NLTL) technologies and terahertz diode construction. It offers consistent linearity performance over 25 GHz of RF bandwidth at sampling rates to 2 GHz. Able to replace traditional mixers and reduce complexity of current broadband radar system architectures, product...

Connectors facilitate board to board data transfer.

Offered in true differential twinax packages with NDL, SMA, and Micro-D Size constraints, Micro Twinax series miniaturized connectors support 100 Base-T Ethernet and 1 Gbps min Fibe Channel operation. Products can be driven via matched impedance differential pair interconnections for board to board data transfer. All connectors are available in straight or right angle versions.

Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications

This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.

Current Sense Amplifier features 6 gain settings.

Able to sense input voltage to 48 V, high side LT6100 uses internal resistors and can be configured for one of 6 gain settings with gain accuracy of 0.5%. Buffered output allows part to be directly loaded by other circuitry. Differential inputs have 300 Ã-µV offset and can accept fully differential voltages up to supply. Able to withstand -48 V reverse battery condition, LT6100 uses separate...

Oval Color LEDs suit full-sunlight sinage applications.

With viewing angle of 110Ã-

Power Outlet Strip is approved for medical facilities.

Incorporating double-fault safety protection and tested to US and Canadian safety standards, Model PS-615-HGULTRA provides power distribution solution with six NEMA 5-15R hospital-grade receptacles, permitting multiple items of electrical equipment to be operated in rooms with only single duplex outlet. Unit features all-metal case, 15 ft AC power cord, built-in resettable circuit breaker, and...

Wireless Device suits industrial networking applications.

Used with Ethernet switches and other Ethernet-ready devices, AirWorks AWK-1100 may be operated as AP, bridge, or AP client to provide ready access to WLAN. Industrial IEEE 802.11g wireless product features Wi-Fi Protected Access security capability and redundant power inputs. Able to authenticate and authorize wireless users by IEEE 802.1x and RADIUS, plug-and-play solution offers DIN-Rail...

Broadband Amplifiers suit EMC test applications.

With rated power outputs of 700 and 800 W, Models 700S1G4 and 800S1G3 operate from .8-4.2 GHz and .8-3 GHz respectively. Both have low levels of spurious signals, and are suited for use as driver amplifiers in testing wireless and communications components and subsystems. Each can be used as test instrument covering multiple frequency bands, and operates with variety of communication technologies...

Harmonic Filters attenuate harmonic distortion.

HarmonicGuardÃ-® Series HG7 Drive-Applied Harmonic Filters limit harmonic distortion at input terminals to levels between 5 and 7% TDD (typ) and consistently hold TDD levels at full and half loads. Product, offered in multiple package options, contains capacitors rated for harmonic duty and fits into motor control centers. Use of reactor technology eliminates nuisance tripping. With HG7,...

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.