Power Amplifier supports multiple linear EDGE transceivers.
Model RF3159 quad-band power amplifier is designed to be final amplification stage in dual-mode GSM/GPRS/EDGE mobile transmit lineup operating in 824-915 MHz and 1710-1910 MHz bands. Amplifier features 6 x 6 mm package, gain optimized for input power window of -3, integrated power control and band select, single 3.2-4.5 V supply voltage, integrated VBatt tracking circuit, and Pout GMSK +35, +33...
Read More »Host Bus Adapters include integrated RAID.
Addressing both internal and external storage environments, LSISAS Series PCI-X Serial Attached SCSI Host Bus Adapters are available in 4- and 8-port models that support RAID levels 0, 1, and 1E. Integrated RAID enables OS independence and does not require special drivers. All models are supported by MyStorage(TM) management software and utilize LSI Fusion-MPT(TM) Message Passing Technology...
Read More »Perkinelmer's ACULED(TM) Selected by Visopia for Lighting Design-In for Mazda's Kabura Concept Car
Setting the Mood(TM) in Illumination with ACULED's Superior Brightness, Excellent Color Mixing and Compact Size Fremont, Calif. - January 25, 2006 - PerkinElmer Optoelectronics, a global technology leader in digital imaging, specialty lighting and optical detection technologies, today announced that Visopia, a Los Angeles-based advanced lighting design company, selected PerkinElmer's high power...
Read More »Sanmina-SCI to Showcase Leading-Edge PCB and Backplane Technology at DesignCon 2006
SAN JOSE, Calif., Jan. 31 / -- Sanmina-SCI Corporation (NASDAQ:SANM), a leading global electronics manufacturing services (EMS) company, today announced that it will exhibit new printed circuit board (PCB) and backplane technology developments at DesignCon 2006, to be held February 6 through February 9, at the Santa Clara Convention Center in Silicon Valley. Sanmina-SCI will be located in the PCB...
Read More »
Quality Assurance and Reliability in Everything We Do
Learn about SSP quality assurance metrics, certifications, warranty, and safety and delivery guarantees in our free eBook.
Read More »Services offer semiconductor testing and conversion.
Independent RoHS compliance service center, E-Certa, converts semiconductors that contain lead to lead-free, RoHS-compliant devices. Service provides customers with X-ray fluorescence test results, certificate of compliance, new package labeling, and Material Composition Declaration form to ensure due diligence. Other services include conversion of no-lead to leaded components for military and...
Read More »
Lifting Solution includes hoist, mounting, and basket.
Lifting solution includes Gemini Plus portable hoist, Scaff-Trac mounting option, and Equipment Basket. Hoist has single and double line lifting capacities of 600 and 1,200 lb, respectively, and is equipped with non-rotating cable, up limit switch, and failsafe brakes. Scaff-Trac allows cantilever of 3Ã-½ ft. Equipment basket is available in 800 and 400 lb capacities. Other combinations of...
Read More »Interconnect Arrays provide up to 500 I/Os.
Featuring choice of solder-crimps on tails, SEARAY(TM) SEAM/SEAF Series high density interconnects offer traditional tin-lead alloy or RoHS compliant tin-only and provide solid grid of contacts on .050 in. pitch. Products are available with stack heights of 7, 8.5, and 10 mm, and array sizes of 8 or 10 rows by 20, 30, 40, or 50 pins per row. Connectors' performance at -3 dB insertion loss is 4...
Read More »Level Translators offer ESD protection and card detection.
Available in 3 x 3 mm microTFBGA25 package, ST6G3238E 6-bit level translators are intended for interfacing 1.8 or 2.5 V signals of mobile phones and products used by plug-in memory cards with nominal 3.3 V levels. Translators feature 40 Ohm series resistor and on-chip pull-up resistors. Propagation delay is 4.4 ns max for 2.3V/3.0V translation, and quiescent current is 20 microA max on each side...
Read More »Actel Introduces Fusion Technology and Ushers in Era of the Programmable System Chip
Actel Fusion Technology Combines Analog Peripherals, Flash Memory and FPGA Fabric in a Monolithic Programmable System Chip MOUNTAIN VIEW, Calif., July 18 -- Actel Corporation (NASDAQ:ACTL) today unveiled its Fusion technology, launching the era of the Programmable System Chip (PSC). Leveraging its leadership position in flash-based FPGAs, the company has developed the industry's first technology...
Read More »
ICP-® Sensor Signal Conditioner for Process Monitoring, Quality Assurance and Product Testing
January 10, 2006, Depew, NY, USA - The Model 410A01 signal conditioner from the Force/Torque Division of PCB Piezotronics, Inc. (PCBÃ-®) is designed for operation with Integrated Circuit Piezoelectric (ICPÃ-®) force or strain sensors and is ideally suited for monitoring forces experienced during manufacturing, assembly, on-line processes, quality assurance, or end-of-line product testing....
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
