New & Superior Avionics Mounting Devices
No matter how new your Avionics Mounts are, their days are numbered! Nashville, Indiana - 2/8/09 Avionics Mounts Inc. is pleased to introduce the next generation of MS28042 and ARINC 408A avionics clamps. Avionics Mounts' new unibody design, (U.S. and International Patents Pending) eliminates the continuity problems across the band and lug, and provides a stronger, lighter aerospace instrument...
Read More »Fiber Optic Coupler/Splitters serve variety of applications.
Available in 1 x 2, 1 x 3, 1 x 4, 1 x 8, 2 x 2, and 2 x 4 configurations with all industry standard fiber optic connectors, Polarization Maintaining coupler/splitters either combine 2 or more signals into one or split one signal into multiple paths. They support 1,550, 1,310, 1,060, 980/960, 780, and 633 nm wavelengths. Customizable units are offered in either ruggedized plastic housing with 3 mm...
Read More »
HD Video Filter Amplifiers operate from single 3.3 V supply.
Consuming only 9.5 mA of quiescent current per channel, and featuring low-power shutdown mode at 12 Ã-µA, models MAX9652/MAX9653/MAX9654 suit applications in set-top boxes, A/V receivers, and portable equipment with HD outputs. Designed for YPbPr component-video signals, MAX9652/MAX9653 have fixed passband for HD video, while passband of MAX9654 is logic selectable between SD and HD. HD...
Read More »
Fiber Optic Cassette comes with military style connectors.
High density, pre-terminated Fiber Optic Cassette Model 6008 breaks out 1 MTPÃ-® 8-strand fiber cable into 8 single strand singlemode Military Style ST connectors. Cabling side (rear) contains MTPÃ-® interface for connecting trunk or backbone cabling, while optical assembly within cassette interconnects rear and front ports. System helps save duct space and installation time, when patch...
Read More »
TOP 3 SEAL TROUBLE SIGNS and HOW TO FIX IT
If ignored, broken seals can lead to a loss in production and equipment shut down. For more information on seals and seal repairs, download now.
Read More »OVP Device offers automatic USB/charger-detection capability.
Incorporating on-board FET, FAN3989 detects presence of USB charger, eliminating external circuitry, and resulting in 15-20% of board space savings. It also monitors VBUS for over or under-voltage conditions, setting FLAG 2 pin low if VBUS is under 3.3 V or over 6.0 V, while turning off internal PMOS load switch. Suited for cell phone applications, unit comes in compact 8-lead MLP packaging,...
Read More »
Miniature Connectors suit space-constrained applications.
Compatible with pin configurations used by U.S. and Europe manufacturers, Micro Mini AC and DC Plugs are molded to 300 V, 22 AWG, AWM cable rated for 105Ã-
Read More »SiC Schottky Diodes increase efficiency by removing charge.
Suited for use in converters where every fractional efficiency percentage is valuable, STPSC806D and STPSC1006D silicon carbide (SiC) Schottky diodes save energy normally lost during switching. Elimination of reverse recovery charge minimizes switching losses and heat dissipation while simultaneously optimizing efficiency and allowing use of smaller components. Both 8 A-rated STPSC806D and 10...
Read More »Camera Chips facilitate mobile phone design.
Measuring 2.5 x 2.9 x 2.5 mm, CameraCube(TM) 400 x 400 Model OVM6680 and VGA Model OVM7690 combine functionality of single-chip image sensor, embedded image processor, and wafer-level optics in one package. Three-dimensional reflowable devices can be directly soldered to PCB with no socket or insertion required, eliminating need for additional components. With thermal tolerance to 260Ã-
Read More »MOSFET Driver offers 20 A/23 V ratings in compact footprint.
Optimized for V-Core power supplies in mobile computing and graphics applications, MP8698 features 23 V max input voltage and delivers up to 20 A continuous load from 5 x 5 mm footprint. Integrated monolithic driver and MOSFET solution enables higher-density power delivery at increased switching frequencies, reducing need for bulk capacitance as well as board space requirements.
Read More »Pulse Control Module PCM4
The PCM series pulse control module facilitates conversion of a 4 to 20 mA output to an on/off time proportioning output. It mounts directly to the input terminals of an OMEGA DC input SSR and supports single or 3-phase operation. Perfect for water, chemical, automotive, and food processing industries. Recommended for applications including HVAC, lab use, and automotive-engine testing. Price...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
