New Electrical Equipment & Systems Products

AC Power Sources available in single and three phase.

ASX series switch-mode power sources use high-frequency pulse-width modulation for power conversions, producing outputs of 1500 VA to 6000 VA. They are available with manual controllers that adjust voltage and frequency from front panel. Programmable controllers can be used to simulate power conditions for equipment under test (EUT), capture and characterize output of those simulations, and...

Drum-Motor Lagging extends belt life.

Drum-motor lagging options and motor-face patterns improve belt traction and tracking in concrete and aggregate operations. Laggings are available in smooth or patterned rubber and urethane or metal. Metal-tread laggings eliminate oil build up in asphalt recycling. Laggings complement standard parabolic, machine-crowned shell that tracks on all points of contact. They ensure even belt wear and...

Circuit Breaker has across the line motor start approval.

Series 1658 thermal circuit breaker, with current ratings from 5 to 35A, is suitable for wiring systems up to 250 Vac or 28 Vdc. It features tease-free, trip-free, snap-action mechanism with push-to-reset or auto-reset actuation, thread-neck panel mounting, and optional water splash cover. Circuit breaker meets UL 1077 standard for supplementary protectors and UL 1363 standard for relocatable...

Power Relay meets U.S. and European standards.

Model AZ962 10 Amp SPDT or SPST relay has cadmium free contacts, 0.26 in. square footprint, creepage/clearance to VDE0435 and VDE0700, and is available in high CTI version for European applications. For high-temperature applications, it comes with Class F insulation. Creepage/clearance of 4 mm/3mm allows it to withstand 4000 V surge from contact to coil.

Customized Silicone Technology: For Today's and Next Generation Electronic Applications

This white paper provides and in-depth overview into the customized silicone technology for electronic protection.

DC/DC Converter takes up small amount of DIN-rail space.

CP-DCDC 50 W family is available with 12 or 24 Vdc inputs, and has outputs including 5 Vdc @8 A, 12 Vdc @3 A, and 24 Vdc @2 A, with continuous short-circuit protection on output, and over and under voltage protection. Status indication is standard. Slim unit occupies only 2 1/4 in. of DIN-rail space. Module, with metal housing, mounts on TS 35 DIN rail. Optional chassis-mount hardware is...

Interface connects to any PLC.

QuickBloc Universal PLC interface has 8 or 16 channels, connects to any manufacturer's PLC, and has choice of screw or tension clamp technology. It comes with terminals, pre-wired cable with flying leads ready to attach to any PLC's front panel adapter, and pre-printed marking tags. Options are available for fusing, analog signals, and PCB versions that use pluggable cable system.

Tap Extensions come in sets.

Line of 5 and 9 in. long tap extensions are available individually or in sets of nine sizes. Extensions are made from high quality tool steel for strength and durability, and have slim profile design that fits into tight places not accessible to conventional tap extensions. Compression cap provides easy tightening, with no wrench required. Integral compression collet eliminates need for collet...

DC/DC Converters suit low voltage applications.

PowerQor(TM) Tera Series half-brick isolated DC/DC converters include output voltages of 15, 12, 5, 3.3, 2.5, 2.0, 1.8, 1.5 and 1.2 V. All units draw power from 48 V nominal input and deliver 60 amps or 165 watts output. Typical efficiency for 1.2 V module is 88% at half-load (30 A) and 84% at full load (60 A). It provides full 60 A of output current at up to 70 deg C, and 200 LFM airflow with no...

Transmitter comes in integral and remote configurations.

U Series Non-Contact Ultrasonic Transmitter provides accurate level measurement in applications such as sump pit monitoring, gypsum silo level, fly ash silos, and steam, and condensation. It offers automatic gain and low frequency sensors, which penetrate dust, fog, and foam. Its programming allows transmitter to adapt to real-time conditions.

Relay Module takes up little rack space.

Slim MICROSERIES is less than 1/4 in. wide, requires very little space on TS35 DIN rail, and offers choice of screw or tension clamp connections for wires up to 14 AWG. Module has release mechanism that secures relay safely and reliably on socket base, with eject function for quick release when servicing is required. Relay modules operate on nominal coil voltages of 5, 12, 24, 48, and 60 Vdc, 24,...