New Electrical Equipment & Systems Products

Lighting Ballasts have low-profile design.

Triad(R) ballasts, with 1.0 in. height, are designed for 1- and 2-lamp operation and include models for T5 and T5/HO lamps, ranging from 14 to 54 watts. T5 and T5/HO ballasts have universal-input voltage of 108 to 305 V, end-of-lamp-life shutdown circuit with auto reset, less than 10% THD, programmed rapid-start technology, and plug-in lead connectors. Applications include indirect, pendant...

DC Motor offers design flexibility.

M4000 DC Motor Series is rated at 1/30 to 1/4 hp with speeds to 3,500 rpm. Unit is available in various stack lengths.

Brushless DC Motors run quietly at high speeds.

Silencer(TM) BN34 and BN23, in 34 and 23 frame sizes, respectively, have aluminum housings to protect motors in tough environments. BN34 has speeds up to 20,000 rpm. Compact motor suits applications requiring low audible noise, long life and high torque. High-energy version BN23 offers continuous torque ratings up to 70 oz-in. Powerful rare earth magnets produce over 40 MGOe. Options include...

Optical Switch Cards automate test applications.

Model 7090 1x16 optical switches route single signal to 16 DUTs or 16 instruments. They switch optical signals in 1290 to 1650 nm range and use single mode fibers with FC/SPC and FC/APC connectors. All Model 7090 cards are compatible with company's GPIB-programmable Model 7001 and 7002 switch mainframes. Switches can be used in combination with Model 7090 1 x 4 and 1 x 8 optical versions, plus DC...

Inventory Management Services

This white paper provides an overview into the benefits, approaches and considerations for inventory management services.

Battery Chargers protect against memory effect.

BVL Series 2-stage lead acid battery chargers include automatic voltage switchover technology that senses battery current, drives it to pre-determined level and transfers charge from fast to float. Fast and float charges range from 7.35 to 29.40 Vdc and 6.90 to 27.60 Vdc, respectively. Models are available in 6, 12, and 24V. Chargers comply with EMI-RFI regulations and carry safety agency...

End Mills machine broad range of materials.

Manufactured from premium M42 Cobalt steel, Roughing End Mills can be used to machine steel, stainless steel, titanium, cast iron, nickel, copper, aluminum, and magnesium. They have all-ground roughing profile with center cutting end tooth geometry that allows for plunging and profiling. Uncoated, TiCN and TiCN surface finishes are available. APPLIX(R) MX Series DIN overall length production taps...

Power Supply fits CompactPCI(R) systems.

Model cPCI35ODC 6Ux8HP hot-swap supply is in compliance with PICMG(TM) 2.11 R1.0 Power Interface Spec and other CompactPCI standards. Delivering 350 W of continuous output power, unit supports standard PCI output voltages of +5 V, +3.3 V, +12 V, and -12 V with no minimum load requirement. Active current sharing and internal ORing diodes are included to support high availability (HA) applications...

Current Transducer offers closed loop control.

DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...

Sensor Box Line is available in 3- or 4-pole versions.

SAI line includes fieldbus active components for Profibus DP, ASI Interface, and CAN Open. Features include bus and power connections through cable glands or metric M23 and M12 (coded B, PB) connections. Distributor base module is available as 4- or 8-channel M12 unit with IP68 or NEMA 6P rating or with IDC quick-fit technology for IP67 or NEMA 6 rating. M12 technology is available as 4- or...

Power System fits telecommunications applications.

X482 telecom power distribution solution fits in 1U chassis, yet distributes up to 900 A. It allows up to 20 circuit breakers to be mounted in 19 or 23 in. racks. Power fed to system input is divided into branch circuits that include protection for individual loads. Circuit breakers have plug-in terminals to permit swapability and front access, and are available in ratings from 100 mA to 50 A at...

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.