New Electrical Equipment & Systems Products

Washdown-Duty Wormgears suit food and beverage industry.

Enhanced Protection W Series and VF Series wormgears and gearmotors can be installed in areas requiring high levels of hygiene and corrosion resistance. Complete units have exterior-washdown, epoxy coating, approved by USDA and Agriculture Canada, with stainless-steel fittings for installations in close proximity to food, drug, and beverage operations. Additional applications include marine and...

DC/DC Converters provide 75 watt triple output.

HE Series converters are packaged in 1/2 brick case and provide 3 regulated DC outputs. Input ranges are 18 to 36 Vdc and 36 to 75 Vdc. Primary output voltages are 3.3 V at 20 A or 5 V at 15 A, and auxiliary outputs are +/-12 or +/-15 V at 2A. Units include isolation voltage of 1544 Vdc from input to output, switching frequency of 430 KHz, and thermal shutdown with auto restart for fail safe...

Circuit Breaker snaps into place.

Series 1658-F single-pole circuit breaker is available in ratings from 5 to 30 A, making it suitable for AC systems up to 250 V and DC systems up to 28 V. Tripping action is provided by thermally activated disc bimetal. Unit provides interrupting capacity up to 2000 A per UL 1077. It includes push-button manual reset, and trip free mechanism that allows device to safely interrupt overload...

Wireless Encoder provides security.

rfHCS362G/362F encoders integrate built-in radio frequency (RF) transmitter with company's secure Keeloq(R) access control system. Encoder provides programmable 32-bit serial number and two 64-bit user-programmable encryption keys for secure identification. Code hopping technology makes each transmission unique, eliminating threat of capture and re-send schemes. Applications include electronic...

Rack System Design & Buyer's Guide

There is plenty to consider before setting up or replacing storage rack systems in your warehouse. This whitepaper contains a guide and general checklist of the most important considerations.

Photo Control turns on lights automatically.

NightStar(TM) electronic roadway twistlock photocontrol provides consistent day to day, season to season, turn on/ turn off control for maintaining critical time of day light levels. It has fully encompassed filtered silicon sensing element and heat dissipating mechanical for standard and high temperature applications.

Pushbutton Switches withstand washdowns.

GB and G3B series of washable, ultra-miniature through-hole and surface mount pushbuttons have Sliding Twin Crossbar (STC) contact mechanism, where gold plated contacts are wiped clean with every actuation. Switches are suitable for use in low voltage, low current, logic level circuits, such as handheld equipment. Both models are sealed for automated processing techniques including flux-cleaning...

AC Power Sources available in single and three phase.

ASX series switch-mode power sources use high-frequency pulse-width modulation for power conversions, producing outputs of 1500 VA to 6000 VA. They are available with manual controllers that adjust voltage and frequency from front panel. Programmable controllers can be used to simulate power conditions for equipment under test (EUT), capture and characterize output of those simulations, and...

Connector eliminates bent pins.

Power-Edge(TM) PEC Series has edge card interface with 3, 7 or 10 contacts. One-piece interface is rated up to 5 A and has contacts on .100 in. pitch. Built-in card latches increase withdrawal force required for removing power board. Optional alignment pins and locking clips can be provided.

DC/DC Converters provide efficiencies above 90%.

V7PC-04C Series non-isolated boost DC/DC converters provide 5 V power from 3.3 V source. They operate over 3.0 to 4.0 V input range, while providing maximum output current of 4 A. Available with or without remote on/off feature, step-up units allow operation to 70 deg C with no derating. Converters feature single-in-line package, fixed-frequency operation, and overvoltage and short circuit...

Welding Generator is driven by diesel engine.

Trailblazer(R) 301 D boasts 300 A output and 10,000 W peak auxiliary power rating at 104 deg F. Multi-process, CC/CV machine provides 20 to 300 A dc output for Stick, TIG, MIG and Flux Cored welding. It also provides 35 to 225 A of ac current at 60% duty cycle for TIG welding. Generator is powered by 18.8 hp Kubota diesel engine that idles immediately when started. Welding arc is not affected...

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.