Turning/Milling Center has 2-channel workshop programming.
Equipped with 12,000 rpm (18,000 rpm optional), 29.5 hp spindle, GMX 250 S linear Turning/Milling Center incorporates linear drive in Z-axis as well as cross-carriage slide with Y and B axes. Machine allows graphically-supported, 2-channel workshop programming on basis of adapted Plus IT controls from Heidenhain with integrated TurnPlus programming. Capable of 3D-workpiece simulation, modular VMC...
Read More »Turning Machines do not require reference point guiding.
Models CTX 310/410 are equipped with counter spindle expansion stage for 2-sided complete machining and Y-axis expansion stage for eccentric drilling and milling machining. Fast-indexing VDI servo turret (from 0.1 sec), also included, features 12 tool stations and optional driven tools. Both machines have 45Ã-
Read More »Vertical Machining Centers feature 3D controls.
Equipped with 8,000 rpm spindle (12,000 rpm optional), DMC 35 V Series features cast-iron bed with 3-point support in C-Frame design. DMC 635/835/1035 machines employ direct drive main spindle and 20x tool magazine with double gripper for 1.6 sec tool exchanges. Capable of rapid traverse speeds to 1,181.1 ipm, series uses roller guideways in all axes and CNC-controls with 15 in. TFT screen and...
Read More »
Turning Insert is available in front and back turning styles.
UTILISÃ-® AG MultidecÃ-® Swiss Made turning inserts provide repeatability of less than .0004 in. for turning work 1 in. dia and below. Utilizing chipbreaker design for efficient chip flow, OD turning inserts feature holding system with dual screw clamping and 3-point insert location that provides rigidity and accuracy. They are suited for titanium and 300 series stainless and other...
Read More »
Checklist: How to Get the Right Belt the First Time
This guide is intended to help identify and address application criteria necessary to specify the right belt to deliver a highly efficient, reliable product.
Read More »
Infinite Positioning Indexer offers ergonomic operation.
Greased for life to provide zero-maintenance positioning solution, RS-320A has low-profile design (14 in. from floor to mounting surface) and incorporates near-zero backlash gearbox with right angle motor mounting. System features cast iron base, unbalanced load support capability, and no pre-set stops. Thrust capacity is 11,000 lb, positioning accuracy is .0025 in. at 3 ft radius, and E-stop...
Read More »Wash Water Recycle System offers plug-and-play operation.
Designed to help meet EPA, local, and state regulations for zero-discharge wash water recovery and recycling, stationary Model PFS comes with 185 gal bulk storage tank and 1/3 hp submersible pump. It features 3 stages of inclined gravity separation, 2 stages of oil separation, 3 stages of cleanable hydrocarbons, and chlorine injector to control bacteria growth. System is suited for rental yards,...
Read More »
Truline Tool America's, a Division of Johnson Carbide Products, Inc., Issues License to European-Based H.A.M. Precision to Sell and Service the Truline Tool-® Family of Composite Boring Tools in Thirteen Countries
The successful development and application in North America of the new patented TruLine ToolÃ-® family of composite fine boring tools has prompted TruLine ToolÃ-® to undertake a broad European licensing agreement with well-known German-based carbide and tooling manufacturer, H.A.M. Precision. The TruLine ToolÃ-® technology will be sold and serviced by H.A.M. Precision in thirteen...
Read More »
Pennsylvania Granulators to Size Coal for Worlds Largest CFB, And First Super Critical CFB Power Plant
Broomall, PA (October 27, 2006): Pennsylvania Crusher's TKK granulators have been purchased by Foster Wheeler Ltd. Foster Wheeler Energia Oy, and its Polish subsidiary, Foster Wheeler Energia Polska Sp. z o.o.. This group is handling the design and erection of a 460 MWe circulating fluidized-bed (CFB) boiler island for Poludniowy Koncern Energetyczny (PKE) at Lagisza in southern Poland. This...
Read More »
New Romicron-® is Breakthrough in Precision Boring
Romi A Tradition of Innovation See Us At IMTS Booth A-8343 ERLANGER, KY - Romi Machine Tools, Ltd, long an industry leader in turning and machining center technology, introduces the RomicronÃ-® with Multiple Cutting Edges. This is the latest technological breakthrough fine boring system from Romicron. The RomicronÃ-® with Multiple Edges is a reliable ultra-precise boring system for...
Read More »
Reelcraft Introduces New Light Duty Cord Reels
Reelcraft's new line of Light Duty Cord Reels are designed for less strenuous applications in which a capable and long-lasting reel is required. These reels accommodate lengths of 16/3, 14/3, 12/3, and 10/3 diameter cable. Reelcraft's light duty cord reels help make the workplace safe by keeping long electrical cords up and out of harm's way. For additional information call 1-800-444-3134 or...
Read More »
Neagle Choice, LLC Announces New Available Services
Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.
Read More »
