Electronic Components & Devices

LEDs are TTL and CMOS compatible.

With service life of 100,000 hr and intensities from 240-1,230 mcd, miniature Wedge-Based LEDs produce similar color output as white T-1/34 wedge-based incandescent bulbs. Internal resistor is provided at 130 or 430 ÃÆ'Â-¢ Â-¦. InGaN chip materials create rugged design with operating temperature from -40 to 80Â-

Read More »

Termination Networks do not require impedance matching.

QDN Series, suited for high-speed memory buses, terminates load impedances and clamps high and low-state reflections as well as noise. Supporting up to 18 termination lines, QDN001 Series consists of 36 Schottky diodes in one package. With 17-channels, QDN002 Series ESD protection network provides 15 kV HBM and 8 kV ESD contact protection, and 18-Channel Series QDN003 Schottky diode termination...

Read More »

Digital Signal Processors suit home audio applications.

Intended for multi-channel audio applications, Aureus(TM) 300 MHz Model TMS320DA710 and 250 MHz Model TMS320DA708 feature reverb algorithms for life-like room simulations, equalization techniques for room acoustic correction, and true dual-zone decoding and post-processing for multi-room applications. Dual Data Movement Accelerator performs non-sequential external memory accesses and circular...

Read More »

Interface Cards enable PXI/CompactPCI control via laptop.

Suited for portable and mobile applications, ExpressCard MXI and PCMCIA CardBus interfaces provide software-transparent link to PXI/cPCI system, delivering compatibility with all drivers and application development environments. ExpressCard MXI (NI PXI-ExpressCard8360) offers direct control of PXI/cPCI systems from laptop computers with ExpressCard slot. ExpressCard standard works with USB 2.0...

Read More »
Design & Manufacturing Process of a Coil
Sponsored

Design & Manufacturing Process of a Coil

Because the design and manufacturing of electromagnets are critical to the successful operation of the application, it's important to spend time defining your requirements before purchasing coils for an application. This eBook will guide you through the process of evaluating the application's constraints, identifying the needed specifications, and collaborating with a manufacturer to develop an appropriate coil solution for the application.

Read More »

Dell XPS 600 features NVIDIA's nForce4 SLI X16 MCP and 2 GeForce(TM) 7800 GTX GPUs.

New Dell XPS 600 Is World's First to Feature NVIDIA nForce4 SLI X16 MCP and Two NVIDIA(R) GeForce(TM) 7800 GTX GPUs SANTA CLARA, Calif., Aug. 8 -- NVIDIA Corporation (NASDAQ:NVDA), a worldwide leader in graphics and digital media processors, today announced that the new Dell XPS 600 desktop PC features NVIDIA nForce4 SLI X16 Intel Edition technology and award-winning GeForce 7800 GTX graphics...

Read More »

Encoding Tools create Flash Player 8 content.

Enhanced with TrueMotion VP6 codec, Flix Pro Flash Video encoder enables users to edit, crop, convert, and post video to web in minutes. Flix Engine lets users add Flix's Flash Video encoding capabilities to software, and enables website visitors to convert video, audio, and image files to Flash. Users can allow anyone within intranet to have access to Flix solutions.

Read More »
Core Module includes 22.1 MHz Rabbit 3000-® microprocessor.

Core Module includes 22.1 MHz Rabbit 3000-® microprocessor.

RabbitCore(TM) RCM3750 features 10/100Base-T connectivity, 512 K Flash, 512 K SRAM, 1 Mb serial Flash, 4 serial ports, and 33 digital I/O. Module mounts directly on user-designed motherboard with single 0.1 in., 2 x 20 dual-row IDC header and can interface with CMOS-compatible digital devices. Built-in low EMI features, including clock spectrum spreader, virtually eliminate EMI problems. Dynamic...

Read More »
DAQ Board offers simplified I/O connectivity.

DAQ Board offers simplified I/O connectivity.

Equipped with NI-STC 2 system controller, PCI-6221 multifunction DAQ board uses 37-pin D-Sub connector for I/O connectivity and provides measurement and control capabilities suited for machine builders, control systems, design verification, and test. Features include 16, 250 kS/s, 16-bit analog inputs; two 833 kS/s, 16-bit analog outputs; and two 80 MHz, 32-bit counter/timers. Unit also has 10...

Read More »
DAQ Boards deliver simultaneous sampling rates to 3 MS/s.

DAQ Boards deliver simultaneous sampling rates to 3 MS/s.

S Series devices for PCI bus include 3 MS/s sampling PCI-6133 and PCI-6132 and 500 KS/s PCI-6123 and PCI-6122. With 14-bit resolution, PCI-6133 and PCI-6132 include dedicated A/D converter per channel architecture as well as 8 and 4 channels of simultaneous sampling, respectively. Models PCI-6123 and PCI-6122, with 8 and 4 channels of simultaneous sampling, offer 16-bit resolution. Each board...

Read More »
DAQ Boards suit sound and vibration applications.

DAQ Boards suit sound and vibration applications.

In addition to 24-bit output channels, Dynamic Signal Acquisition board, Model PCI-4461, offers 24-bit input channels, making it suited for stimulus response applications. Input-only version, Model PCI-4462, provides four 24-bit input channels and 118 dB dynamic range. Engineers can synchronize multiple PCI-4461 and PCI-4462 boards to attain 4-input and 4-output systems or 6-input and 2-output...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics