Electronic Components & Devices

IDC Systems are available in various sizes.
Electrical Connectors

IDC Systems are available in various sizes.

FFSD Series IDC system features contacts on 0.050 in. x 0.050 in. pitch and is available in double row designs. Assembly measures 0.200 in. tall and includes 4-finger Beryllium Copper contacts with 10 to 25 positons per row. Notch polarization is standard. TCMD Series system features contacts on 0.0787 in. x 0.0787 in. pitch with square Phosphor Bronze pins and 2 to 25 positions per row. TCSD...

Read More »
Propeller Mixers suit pressure and vacuum vessels.
Mixers

Propeller Mixers suit pressure and vacuum vessels.

Portable or Fixed-Mount Propeller Mixers provide strong axial flow pumping characteristics via their impeller. Impeller shape and style allows impeller to be positioned as low as 1/2 or as high as 3 times impeller diameter from bottom for batch volume flexibility. Mixers can be angle-mounted off-center, and may be combined with scraped-surface action of anchor-style mixers to provide dual or...

Read More »
Precision Ground Insert has 3F geometry.
Inserts

Precision Ground Insert has 3F geometry.

Precision ground insert with 3F geometry for stainless steels, aluminum, high-temperature alloys and steels features periphery ground edges for accurate profiling and indexability. Additional features include light hones and positive geometry. Radii are available for light depths of cut and producing small corner radii. PVD grades offer layer of lubricity for reduced coefficient of friction....

Read More »
Electronic Adapters

Ethernet Adaptor features 1000BaseT capability.

CL PMC/GB1 2-channel Gigabit Ethernet adaptor provides high speed networking through use of Intel® 82543 Gigabit Ethernet controllers. It allows board to automatically negotiate transfer rates of 10, 100 or 1,000 megabits per second in full or half duplex mode. Adaptor complies with PCI specification, features 3.3 or 5 Volt signaling and 32-bit or 64-bit transfers, can operate at 33 or...

Read More »
Oscillators and VCXOs offer low noise performance.
Oscillators

Oscillators and VCXOs offer low noise performance.

LVDS products are available in 9 x 14 mm J-lead ceramic packages as well as 5 x 7 mm leadless ceramic packages. UVC series oscillator is housed in 5 x 7 mm leadless ceramic package. M5R series oscillator comes in 9 x 14 mm J-lead ceramic package. MPV3 series is 9 x 14 mm J-lead ceramic package SMT VCXO. UVV series is 5 x 7 mm leadless SMT VCXO. LVDS output and frequencies up to 800 MHz are...

Read More »
Oscillators

Clock Oscillators support fibre channel data storage.

CB3 106.25 MHz clocks are available in stability grades of 25, 50 and 100 ppm. They are offered for 3.3 and 5.0 Vdc systems and draw 40 and 50 mA, respectively. Output is CMOS compatible and includes output enable/disable feature. Four-pad, 5mm x 7mm surface-mount oscillator packages are compatible with SMT pick-and-place assembly equipment. Temperature ranges include 0 to 70°C for...

Read More »
Male Connectors are designed for use in backplanes.
Electrical Connectors

Male Connectors are designed for use in backplanes.

Type D Vertical Male Connectors are 8+2-row x 25-position headers that provide up to 220 signal contacts evenly distributed on 2 mm grid. They are UL approved and comply with requirement of IEC 917 and IEC 61076-4-101 specifications. Featuring multipurpose center incorporating pre-alignment guides, connectors feature press-fit design for gas-tight connection to PC board and are available in a...

Read More »
Oscillator features frequency range to 156.25 MHz.
Oscillators

Oscillator features frequency range to 156.25 MHz.

F4100 Crystal Oscillator offers standby mode for lower power consumption. Miniature 3.3 V oscillator features operating temperature range of -10°C to 70°C. Frequency stability is +/-100 ppm for all conditions. Output symmetry is 40% to 60% at 1.65 V over entire frequency range of 125 to 156.25 MHz; input current is 60 mA maximum. Unit is suitable for Fibre Channel, SONET, ATM,...

Read More »
Inserter/Extractor has hot stamping area.
Circuit Board Extractors

Inserter/Extractor has hot stamping area.

LP-1107 Inserter/Extractor's positive locking feature ensures secure retention of printed circuit boards and protection of components, circuitry, and connectors. Roll pin configuration locks boards into position, eliminating vibrations and rattles while preventing stress on board and accidental release of cards from connectors. LP-1107 comes with mounting pins, and is available for 1/16 in. thick...

Read More »
Plug End fits appliances and assembles easily.
Electrical Connectors

Plug End fits appliances and assembles easily.

Pre-molded 10-12 AWG Male Bridge provides three-prong plug end for large and small appliance power cords, power tool cords and extension cords. It allows 3 electrical terminals to be crimped at once on assembly line for fast loading of plug overmolds Bridge is available in black or natural nylon. Optional seven-shape blades have retention ledge to maintain firm position during plug molding.

Read More »

All Topics