Electronic Components & Devices

I/O Card suits PC/104-based data acquisition.
Electronic Boards

I/O Card suits PC/104-based data acquisition.

Model 104-DIO-48S, 48-bit, parallel, digital input/output card operates in temperatures from 0 to 65 deg C. 48-channel board offers Change of State (COS) detection, determines data in one READ, and contains 2 type 82C55A Programmable Peripheral Interface chips (PPI). Each PPI provides two 8-bit ports on A and B and two 4-bit ports on C. Each of its 48 I/O lines is buffered and capable of sourcing...

Read More »
Software

Design System provides hierarchical access to parameters.

SPW 4.8 Signal Processing Worksystem block diagram design solution allows hardware, software, and RF engineers to collaborate on projects. Links with other tools include integrations with Xilinx Coregen solution, with analog design flow that supports Cadence(R) AMS Designer, and with SystemC 2.0. SPW 4.8 users can enter and simulate designs consisting of various types of models including C, C++,...

Read More »
Vacuum Contactors are available in large frame models.
Electrical Contactors

Vacuum Contactors are available in large frame models.

Sirius 3R contactors include 225, 265, 300, 400 and 500 A devices which perform 2.6 to 3.0 million operations at rated load. They are available with universal current conventional coils (24-600V ac/dc) and electronic coil. Electronic coil comes in 3 options: interface for direct control from 24 Vdc PLC or power supply, Remaining Lifetime to electronically measure contact erosion, and AS-interface...

Read More »
Holder System offers +/- 0.01 in. tolerance in 4 axes.
Holders

Holder System offers +/- 0.01 in. tolerance in 4 axes.

FlexLoc Convertible Holder System for indexing conveyors provides nearly infinite number of interchangeable machined part-holders or cleats that mount on common, extruded urethane profile. Profile is ultrasonically welded to surface of reinforced urethane belt, and mates to slot in bottom of part holder, cleat or part-holder sub-plate. Profile pitch error of +/-0.02 in., inherent when profile is...

Read More »
SMA Connectors support frequencies up to 18 GHz.
Electrical Connectors

SMA Connectors support frequencies up to 18 GHz.

RS-3232-1 SMA male connector and RSA-3279-10 SMA female connector are made of gold-plated machined brass with gold-plated contacts and Teflon insulation. Panel-mount connectors have 0.500 in. square, 4-hole flanges with holes 0.339 in. on center. Machined Teflon insulation extends 0.126 in. with 0.085 in. dia. Gold-plated .012 in. dia solder post extends .051 in. from dielectric material. Each...

Read More »
Electrical Connectors

FPC Connectors suit compact, mobile applications.

Low-profile FPC right-angle connectors are 0.047 in. high and 0.134 in. wide and include top- and bottom-contact zero insertion force (ZIF) styles. Embossed-tape packaging suits pick-and-place requirements. Metal solder tabs provide PCB hold-down and strain relief on SMT tails. Connectors, with 5 to 24 circuits, are rated at 50 V and 0.5 A. Actuator on bottom-contact version rotates up to...

Read More »
Signal Conditioners support any standard LVDT.
Signal Conditioners

Signal Conditioners support any standard LVDT.

LPC-2100 Series LVDT signal conditioners operate from 115 or 220 Vac, 50-60 Hz line power. User-selectable 0 to ±10 Vdc or 4-20mA analog outputs work in both OEM and system installations. Units can be calibrated for 100% zero offset, allowing 0 to ±10 Vdc output over sensor's range. Multiple signal conditioners can be synchronized to support multi-channel applications. DIN rail...

Read More »
Terminal Strips have 5.4 mm pitch spacing.
Electrical Terminals

Terminal Strips have 5.4 mm pitch spacing.

KL-16 strips have captive hardware, shrouded contacts and polyamide 6.0 plastic insulating housing that covers termination points to protect assembly technicians from shock. They are available with optional protection guard to prevent damage to solid or stranded wire. Strips are provided with clamping screws in open position for quick termination. They are UL rated 250V and 20A for wire sizes...

Read More »
VESA Connector has total height of 1.24 in.
Connectors

VESA Connector has total height of 1.24 in.

PC99 colored connector consists of 1 VESA connector sitting atop two PS/2 mini-DIN connectors. 15-pin VESA D-sub connector is made with blue PBT insulator, and has contact No. 9 recessed to allow last mate/first break on 5V supply voltage. Unit is suitable for graphic displays, and complies with DDC standards. Two 6-pin mini-DIN connectors come in PC99 colors with purple PBT insulator on left and...

Read More »
Fieldbus Connector works in automation systems.
Electrical Connectors

Fieldbus Connector works in automation systems.

ECO Fieldbus Coupler, for applications with reduced I/O requirements has small, 8-bit microcontroller format, yet includes diagnostic and communications capabilities of 16-bit I/O SYSTEM 750 Series version. Coupler can be used with I/O nodes that have maximum 32 byte data sizes, including analog and specialty I/O modules.

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics