Electronic Components & Devices

Accessory Kit supports function generator users.
Signal Generators

Accessory Kit supports function generator users.

Model TLFG kit eliminates time consuming task of collecting cables and adapters just to get started. It has parts that are used every day, including: BNC (m) cable assemblies with RG-58C/U cable and molded bend relief boots; BNC (f) breakout with miniature alligator clips and 9 in. silicone wire; BNC (f) breakout with 0.031 sockets; MiniFlex IC clips; MicroClip IC clips; BNC (f-m-f) in-series...

Read More »
Catalytic Mufflers suit Nissan LPG-powered forklifts.
Converters

Catalytic Mufflers suit Nissan LPG-powered forklifts.

Built from corrosion resistant materials, Nett® catalytic mufflers are direct-fit units. Their built-in, three-way emission control catalyst eliminates emissions of carbon monoxide (CO), nitrogen oxides (NOx), and propane exhaust gas odors. Incorporated emission control and noise attenuation components are included in one shell. Electronic air-to-fuel ratio controller is also available,...

Read More »
Filtration System produces directly sewerable effluent.
Filters

Filtration System produces directly sewerable effluent.

Model UF-300 Ultrafiltration System handles waste volumes of up to 300 gallons per day (GPD). Wastewater-disposal system allows for simple, continuous operation with minimal energy and operator involvement. It employs Â-½ in. tubular ultrafiltration membrane technology to separate water from suspended solids and emulsified oils, and reduces wastes by up to 98% without chemical additives....

Read More »
Series-Wired Filter suits control cabinet applications.
Surge Suppressors

Series-Wired Filter suits control cabinet applications.

SpikeShield(TM) TDR series-wired noise filter and surge suppressor is available in 5, 15, and 20 A 120 V models as well as one 20 A 230 V 3-wire international model. Dry contacts are available for models rated at 120 V for remote signaling capability. Model rated at 230 V comes standard with dry-contacts. Noise filter and surge suppressor is suitable for protecting sensitive electronics in MRO...

Read More »
Interface Board includes support for OPC tests utilities.
Electronic Boards

Interface Board includes support for OPC tests utilities.

SeaPORT ISO-16 provides 16 optically independent, isolated inputs, which provide 1000 V of channel to channel and channel to computer isolation. It monitors signals from 5 to 24 V and eliminates effects of ground loop current. Onboard removable screw terminal connectors are included. Its 72 in. USB A to B cable is included; 18 in. cable is also available. SeaPORT can be DIN rail mounted, and...

Read More »
ESD Suppressor also has EMI/RFI filtering.
Electronic Adapters

ESD Suppressor also has EMI/RFI filtering.

SPUSB1 provides upstream USB port protection. Device combines ESD protection up to 30 kV, EMI/RFI filtering, and termination into SC70 six lead package. Able to protect upstream circuit elements such as USB controllers, it replaces 10 discrete devices required for same functions. Suppressor provides ESD protection for all data lines as tested under MIL-STD-883D specification. It also offers 15 kV...

Read More »
Magnetic Latching Solenoid suits battery operation.
Solenoids

Magnetic Latching Solenoid suits battery operation.

Model SC0323L pull type, miniature, magnetic latching solenoid offers zero power to hold mechanism, suitable for power management in products that require linear actuation and continual hold with absence of electrical power. Rated at maximum force of 4.5 oz at 0.05 in. stroke (10% duty cycle), solenoid is suitable for medical instrumentation, power management devices, computer peripherals, and...

Read More »
Power Jack comes with indicator light.
Electrical Connectors

Power Jack comes with indicator light.

Through-hole, right angle dc jack has LED for applications where it is necessary to show that power is being supplied to device. Jack is UL94V-0 rated, made of black PBT thermoplastic, and rated to 2.5 A at 24 Vdc. Connector is 12.70 mm in height and available with 1.3 mm center pin. LED can be custom made to show either one or 2 colors. Applications include portable devices such as laptop...

Read More »
Oxygen Electrodes last longer in plasma cutting.
Plasma / Flame / Laser Cutters and Cutting Machinery

Oxygen Electrodes last longer in plasma cutting.

SilverPlus(TM) 200-amp silver/hafnium electrodes last up to 3 times longer than company's previous products. They fit company's Hypertherm HT2000, HT2000LHF LongLife, and MAX200 plasma cutting systems. Electrode has silver front end fused onto copper base. Hafnium emitter interfaces with silver, creating better adhesion and cooling than traditional copper interfaces. Hafnium erodes to...

Read More »
Surge Suppressor suits USB to serial adapters.
Surge Suppressors

Surge Suppressor suits USB to serial adapters.

IND Surge suppression package introduces suppression before surge hits device. Each data line is equipped with surge suppressor capable of sustaining up to 40 A peak, 8 x 20 microsecond peak transient surges, clamping voltage of 30 V (15.5 V for RS-422/485 lines), and peak energy dissipation of 0.1 Joules. Surge suppression package is available for all Quatech 2, 4, 8, and 16 port adapters.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers