Electronic Components & Devices

Frequency Converter transforms single phase to three phase.
Power Supplies

Frequency Converter transforms single phase to three phase.

Compact BL3X350 delivers 350 VA per phase of clean, regulated 3-phase ac power from single phase input. Digitally controlled waveform produces clean power while protection circuitry provides for voltage fold back during overloads to maintain undistorted waveforms. Switch selectable, single phase input accepts 115 or 230 Vac at 47-440Hz, so it can accept any worldwide, shipboard or aircraft single...

Read More »
RF Edgeboard Connector accepts RG59 or RG6 cables.
Connectors

RF Edgeboard Connector accepts RG59 or RG6 cables.

F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact...

Read More »
PCB Interfaces provides up to 300 I/Os per connector.
Electronic Sockets

PCB Interfaces provides up to 300 I/Os per connector.

FleXYZ interfaces provide flexibility in X, Y, and Z axes by specifying number of rows, pins per row, and desired board spacing with standard interconnects. YTT Series headers and YTW Series board stackers mate with YTQ and YTS Series sockets to provide board spacings from 0.329 to 1.165 in. By using YTE Series elevated socket, board spacing can be increased to 1.705 in. Interconnects have 4-6...

Read More »
Optical Receivers suit narrowband applications.
Signal Receivers

Optical Receivers suit narrowband applications.

Model R406 provides FWHM response over 18-34 GHz range with peak gain of 20dB. Model R407 provides same response over 34-49 GHz range with peak gain of 24dB, and Model R408 covers 39-64 GHz range with peak gain of 20dB. Hermetically sealed modules can be used for hybrid fiber/wireless systems, distribution of RF carriers, as well as optical phased-array radar. Units are available with choice of...

Read More »
Choosing the Right Material for Your Project
Sponsored

Choosing the Right Material for Your Project

When choosing an appropriate metal material, the range of options is so broad that selecting the correct material for your unique application can be challenging. Different metals have characteristics that can affect weldability, ductility, and formability. Our new eBook outlines the unique properties and applications of popular metals including: Stainless Steel Brass Aluminum Copper Titanium

Read More »
Valve Communications Terminal connects fieldbus and sensors.
Electrical Buses

Valve Communications Terminal connects fieldbus and sensors.

Eclipse VCT connects position sensors, power outputs to solenoids, and communications systems such as AS-I, DeviceNet, Modbus and Foundation Fieldbus modules to standard VDI/VDE 3845 (Namur) valve actuators. It is available in non-incendive version for hazardous areas and in general-purpose micro-connector version for heavy wash-down and non-hazardous applications. Red and green LEDs indicate...

Read More »
Signal Processors

Octal DSP Boards transfer data at 600 MB/sec.

Octal TMS320C6203 DSPs are 6U VME COTS boards that feature both PMC (PCI Mezzanine Card) and VIM (Velocity Interface Mezzanine) interface. VIM mezzanine delivers 1200 Mbytes/sec of I/O data directly to processors, and eight C6203 DSPs provide 19,200 MIPS peak processing power. C6203's VLIW engine executes up to 8 instructions in one 300 MHz clock cycle. DMA controllers transfer data to SDRAM and...

Read More »
Logic Devices perform over industrial temperature range.
Gates

Logic Devices perform over industrial temperature range.

Seventeen 3GHz to 4GHz PECL and LVPECL devices, part of ECL Pro(TM) communications logic solutions, include clock fanout buffers and clock dividers, drivers/receivers, and translators. They operate down to 2.5V single-supply and are guaranteed over -40 to 85 deg C temperature range. Fanout buffer family offers maximum frequency of more than 3GHz, pin-to-pin skew of less than 20ps, and tr/tf time...

Read More »
Vacuum Filters range in size from 4.27 to 39 sq in.
Filters

Vacuum Filters range in size from 4.27 to 39 sq in.

Clear polycarbonate bowls in Plastic In-Line Vacuum Filters provide visual monitoring of filter condition and allow easy cleaning or replacement. Filters can be used for protecting vacuum pumps, valves, ejectors, and other system components from dust and other harmful particles. Corrosion-resistant and immune to rust, they are available with FDA approved black or white nylon housings, Buna-N...

Read More »
DC Solenoid operates in -20 to 40 deg C temperatures.
Solenoids

DC Solenoid operates in -20 to 40 deg C temperatures.

Model SD1240N pull type linear DC solenoid offers rugged D type 2-piece frame and double mounting surfaces. Its rated force is 84oz (max) at 0.08 in. stroke (10% duty cycle). Available with Class A (105 deg F) insulation, SD1240N has dielectric strength rated at 1000VAC for 1 minute, and offers 24AWG flying leads per drawing coil termination. Plunger linkage is slot and cross-drilled; plunger...

Read More »

All Topics