Electronic Components & Devices

Varistor is thermally protected.
Varistors

Varistor is thermally protected.

Available in 20 mm packages, iTMOV(TM) metal-oxide varistor (MOV) offers voltages from 115 to 420 Vac. Integrated thermally activated element opens when MOV experiences elevated temperatures from abnormal, sustained over-voltage limited current conditions to reduce potential threats of thermal runaway condition. It also guards against transient voltage surges. Designed for TVSS modules, series...

Read More »
Converters require no external transformers.
Converters

Converters require no external transformers.

PC104 Series consists of 3- and 4-channel PC/104 and compatible Synchro, Resolver, and LVDT/RVDT to digital converters employing type 2 ratiometric tracking converters. They accept any group of up to 4 individual, 3-wire Synchro, or 4-wire Resolver inputs, or 2-4 wire LVDT/RVDT inputs; over frequency range of 50 Hz to 10 kHz, and convert them into 10-16 bit words of natural binary data...

Read More »
Test Socket withstands rigors of burn-in and HAST testing.
Electronic Sockets

Test Socket withstands rigors of burn-in and HAST testing.

Integra 27 has molded frame with custom-designed interposer insert and integral clamshell lid. Insert is loaded with spring-contact probes that offer insertion life of 500,000 cycles, inductance as low as 0.33 nH, and bandwidths well over 10 GHz. Socket is made of PPS with beryllium copper or nickel silver contacts. Temperature rating is -55 to +150°C.

Read More »
Dual Diode Packages conserve board space.
Rectifiers and Diodes

Dual Diode Packages conserve board space.

ZMDC831BTA and ZMDC832BTA dual common cathode hyperabrupt varactor diodes fit in single SOT323 package. Matched devices have 15 and 22 pF capacitance, respectively, at reverse bias voltage of 2 V. C2/C20 capacitance ratio is 4.5 to 6 and 5 to 6.5, respectively, and reverse leakage current is typically as low as 200 pA. Typical applications include voltage controlled and crystal oscillators,...

Read More »
Resistors

Programmable Resistor offers PXI platform.

Model GX1164 multi-channel resistor board provides four programmable resistor channels. Three channels may be programmed from 1 to 64K Ohm with 1 Ohm resolution, and one channel can be programmed from 10 to 640K Ohm with 10 Ohm resolution. Custom resistor ranges and resolutions are also available. On-board EEPROM provides personalized calibration data.

Read More »
Filters

Filter includes 3-way valves for backwashing.

Ronningen-Petter AFC Series high-pressure, tubular in-line pressure filter offers nominal filtration from 1 to 1650 micron on water-like liquids up to 500 psi. Simple design and quick element access reduces time and effort required to maintain, change elements, and reconnect unit's valves.

Read More »
Diode provides fast/soft recovery.
Rectifiers and Diodes

Diode provides fast/soft recovery.

Stealth(TM) 1200 V diode is designed for switch mode power supply, motor drive, uninterruptible power supply, welding power, and induction heating applications. It combines fast/soft recovery switching with low reverse recovery current to reduce switching transistor turn-on losses in hard-switched applications. Diode is available in single and dual packaged configurations in TO-220 and TO-247...

Read More »
SMB Connectors provide low mating and un-mating force.
Electrical Connectors

SMB Connectors provide low mating and un-mating force.

SMB Series 75-Ohm Connectors include plugs, right-angle plugs, and PCB jacks for frequencies up to 4 GHz. RSB-301-179, positive-locking plug uses spring-loaded collar that must be retracted before connector will un-mate. RSB-300-1-179 straight and RSB-310-1-179 right angle crimp plugs feature standard snap-on coupling with gold plated contacts and body. RSB-350-1, vertical, and RSB-355-1, right...

Read More »
Tiny Inductors handle wide temperature range.
Inductors

Tiny Inductors handle wide temperature range.

PM0402 Series of multilayer, surface-mount chip inductors measure 1 x 0.5 x 0.5 mm and operate in temperatures of -25 to +105°C. Devices have inductance range of 1.0 to 56 nH and dc current range of 150 to 300 mA. Monolithic construction provides high reliability, while ceramic material ensures stable electrical characteristics. Applications include cellular phones, PDAs, wireless...

Read More »
Inductors feature miniature surface mount design.
Inductors

Inductors feature miniature surface mount design.

SMI-3 Series consists of 16 different parts with range of inductance values from 10.0 microH @ 3.28 A to 560.0 microH @ 0.45 A. Tolerances are 20% for 10.0 to 47.0 microH values and 10% for 56.0 to 560.0 microH values. With pads solder-masked to core, inductors can be IR or vapor phase soldered directly to printed circuit board. Typical dimensions are 0.390 x 0.354 x 0.157 in. high.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers