Electronic Components & Devices

Signal Conditioner accepts strain gauge outputs.
Signal Conditioners

Signal Conditioner accepts strain gauge outputs.

Model 8555 accepts 0 to 50 mV single ended or differential input, making it compatible with most strain gage based load cell or pressure transducer outputs. It has 0 to 5 kHz 7 mA pulse output with 50 psec pulse width, making it compatible with PLC high speed counters. Conditioner contains high impedance instrumentation amplifier and built-in 10 V excitation source for powering one 350-ohm load...

Read More »
Dust Collector Filters exceed NIOSH and OSHA specs.
Filters

Dust Collector Filters exceed NIOSH and OSHA specs.

Intended to work with company's OptiFlo(TM) pulse-jet dust collectors, OptiKlean cartridge filters exceed NIOSH and OSHA codes for recirculation of plant air. Filters provide 99.999% average efficiency on submicron particles. Made of polyester reinforced media, filters withstand rigors of pulse cleaning, are moisture resistant, and maintain low pressure drop. Filters are available in flame...

Read More »
Ejectors and Core Pins are hardened for end work.
Ejectors

Ejectors and Core Pins are hardened for end work.

M-2 Thru-Hardened ejectors and core pins are uniformly hardened to Rc 60-63 and can be ground without loss of Rockwell hardness to permit detailed end work and prevent dishing. Ready for mold insertion, they are offered in decimal diameters and 0.0001 increments. Available in straight and stepped diameters ranging from 0.0312-0.2500 in. with 0.0003 in. tolerance, they come in 6 and 8 in. overall...

Read More »
Filters suit CATV applications.
Filters

Filters suit CATV applications.

Model 3272 deletes entire channel and allows for reinsertion of new information without interference. Model 14584 passes single-channel signals, while providing rejection to adjacent channels. Model 14579 removes selected channel from incoming CATV line, while keeping adjacent channels in service. Model 14580 allows channel reuse for new entertainment, instruction or security, by removing...

Read More »
Surge Suppressors

Surge Protector offers snap-in modular design.

Smart Module ensures sensitive electronic equipment is protected from harmful or catastrophic electrical surges. It absorbs arcs quickly and allows minimal energy from arc to flow through module. Once used, indicator light informs technician that module needs to be replaced (without tools). Smart Module is 2.1 x 1.6 x 1.0 in. with fire retardant housing and gold plated contacts. Seven different...

Read More »
Electronic Drivers

MOSFET/IGBT Drivers operate from 4.5 to 25 V.

Dual 2 Ampere IXD_402 and single 9 Ampere IXD_409 MOSFET/IGBT drivers are available with inverting or non-inverting configurations. IXDF402 can also be operated in differential mode. Voltage rating of 25 V makes them suitable for driving discrete IGBTs requiring 15 V gate bias. Both devices can be driven by TTL or CMOS input signals. Package options include standard 8-pin and 16-pin SOIC, 5-pin...

Read More »
IGBT Module is available in phase-leg topology.
Transistors

IGBT Module is available in phase-leg topology.

MII 400-12E4 Dual Pack IGBT module has ratings of 420 A Ic @ Tc = 25°C and 1200 V VCEs. Using 3rd generation Non-Punch-Through (NPTÂ-³) IGBT chips, module features 20% reduction in saturation voltage along with 20% reduction in switching losses. Associated fast recovery diodes are fabricated utilizing HiPerFRED(TM) technology that provides fast recovery with soft characteristics, low...

Read More »
TNC Connectors meet FCC Part 15.
Electrical Connectors

TNC Connectors meet FCC Part 15.

Crimp connectors satisfy requirements of FCC part 15 by reversing contacts within standard connector body. RP-1216-I connector has TNC male pin and interface dielectric in TNC female body, and RP-1202-I has TNC female contact and dielectric in TNC male body. Both RP-1216-I and the RP-1202-I crimp connectors are for use with 2TV-400, LMR-400-UF, WBC-400 and Belden 9913 coaxial cables. They are...

Read More »
Line Reactor provides protection for electronic equipment.
Inductors

Line Reactor provides protection for electronic equipment.

SLR Series DIN rail mounted line reactor supplies additional line filtering capabilities to protect equipment from harmonic distortion, nuisance tripping, and line notching. Its inductive filter removes harmonics to eliminate drive cross-talk and interference. SLR Series is available with footprints from 4.93 x 4.73 x 2.77 in. to 4.88 x 5.91 x 3.66 in. (W x H x D) and ratings from 2 to 20 hp.

Read More »
Gage Amplifier has Windows-based software.
Gages

Gage Amplifier has Windows-based software.

Model 767 has Pentium®-based computer with Windows NT/2000 operating system. Software provides operators with screens that display gaging and machine compensation information. SPC package includes X-Bar, histogram, trend, capability, range, standard deviation, and measurement history charts, as well as tool compensation frequency, tool wear indicator, Pareto diagram, C, Np, P, and U charts....

Read More »

All Topics