Electronic Components & Devices

Electronic Sockets

BGA Socket is side stackable to increase packaging density.

Offered in 2- and 4-bolt hold-down styles, Pin-Ball Socket may be soldered side-by-side, directly to existing footprint of PC board. Surface-mount BGA and LGA socket provides 2 mm clearance for end components. It can be used for 1.00 mm and 1.27 mm pitch packages up to 50 mm in any footprint, on any size board. Socket incorporates spring-probe technology with spring force of 17 g at .025 in....

Read More »
Electronic Video Magnifier simplifies visual inspection.
Electronic Magnifiers

Electronic Video Magnifier simplifies visual inspection.

SpeckFINDER(TM) features 6.4 in. TFT screen to maintain direct line-of-sight viewing. Mouse controls continuous range of magnification from 1-40x without need to change lenses. It also activates auto focus or manual focus option, zoom in/out, on-screen display of magnification power, and other menu driven image control features. Two flexible-arm, 20 W halogen light sources are included. Unit...

Read More »
Image Digitizer mates directly to charge coupled devices.
Signal Processors

Image Digitizer mates directly to charge coupled devices.

Model ADCDS-1405 contains user-configurable input amplifier, correlated double sampling function, and 5 MHz, 14-bit A/D converter in one 40-pin, TDIP package. SMT assembly technique is used to combine mixed-signal ICs and passives in one assembly. Noise specified at sampling rate of 5 Megapixels/sec (145 Â-µVrms) can be reduced to 50 µV. Offerings include programmable input...

Read More »
Analog Input, Digital I/O Card is suited for PC/104.
Electronic Boards

Analog Input, Digital I/O Card is suited for PC/104.

With 500 kHz max A/D throughput rate, RPC632 contains 32 analog-to-digital inputs and 20 programmable digital I/O. Analog inputs have 12-bit resolution and may operate as 32 single-ended inputs or 16 differential inputs, with each input protected to ±32 V. Programmable features include 8- or 16-bit data transfer width and 4 Â-µsec-64 msec conversion intervals. With auto increment and...

Read More »
Socket/Terminal Interfaces have hermaphroditic connectors.
Electrical Connectors

Socket/Terminal Interfaces have hermaphroditic connectors.

Combination socket/terminal interface systems offer self-mating connectors that produce audible clicks" to verify proper seating. With up to 60 I/Os, .100 in. pitch LST Series has Tiger Buy contacts. Offered on .0787 in. pitch, fully shrouded and keyed LS2 Series provides up to 60 I/Os and .380 in. board-to-board spacing. LSS Series, on .025 in. pitch provides full shrouding and board spacings...

Read More »
Linear Receiver Module operates at 10 Gbps.
Signal Receivers

Linear Receiver Module operates at 10 Gbps.

Model VSK10R05 receiver module combines photodetector with integrated pre-amplifier for operation at 9.9, 10.7, and 12.5 Gbps. Providing optical sensitivity of -19 dBm, optical overload of +2 dBm, and bandwidth of 10 GHz, receiver features MSA-compliant 17-pin surface mount small form factor package. In noisy optical environments, optical overload remains greater than 0 dBm at OSNR of 13 dB/0.1...

Read More »
A to D Converter has overvoltage indicator.
Converters

A to D Converter has overvoltage indicator.

LTC1746 14-bit, 25 Msps, Analog to Digital Converter conserves power and digitizes high frequency signals. With 77.5 dB SNR and 99 dB SFDR, unit dissipates 390 mW for high-end medical imaging, portable instrumentation, and communications. LTC1745 is pin-compatible, 12-Bit, 25 Msps ADC with low noise of 72.5 dB SNR and 96 dB SFDR. Input range can span ±1 to ±1.6 V. Units come in 48-pin...

Read More »
Multilayer Varistors offer nickel-barrier termination.
Varistors

Multilayer Varistors offer nickel-barrier termination.

Multilayer varistor (MLV) products, with nickel-barrier termination, enhance solderability by improving wetting characteristics of termination to resist sliding and tombstoning during board-assembly process. Plated-nickel layer is placed over standard silver termination to ensure that termination is immune to solder leaching. Tin plating, placed over nickel layer, improves solder wetting...

Read More »
Ballasts meet demand for shorter ignition times.
Lighting Ballasts

Ballasts meet demand for shorter ignition times.

Quik-Start Compact Fluorescent Lamp (CFL) ballasts ignite lamps in less than 1.0 sec and are suitable for operation of 13 W Triple, 26 W Quad or Triple, and 32 W Triple CFLs. IntelliVolt® technology allows 120-277 V, 50/60 Hz operation. Centium® technology enables units to meet stringent power quality requirements with total harmonic distortion less than 10% and power factor greater...

Read More »
Cable Connector features SMT technology.
Electrical Connectors

Cable Connector features SMT technology.

Board-on SMT IDC connector, with 1.27 mm pitch, enables connection between PCB and IDC ribbon cable with one component. It comes in 12, 26, and 50 pin versions and features pick and place cover and tape-and-reel packaging for fully automatic SMT placement. Made of high temperature black thermoplastic, connector is suitable for SMT reflow soldering.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers