New Electrical Equipment & Systems Products

Aluminum Saddle mounts cold plates to electronic boards.

Aluminum Saddle has through or tapped holes for securing company's CP-20 Extended Surface cold plates to electronic boards. It applies consistent force across cold plate, ensuring good thermal connection. All-aluminum cold plates consist of connector tubes welded to micro-channel aluminum extrusion. They can be used with EGW, refrigerant, Fluorinert(R), and other fluids to remove heat from high...

Gearmotors now come in smaller sizes.

New models in Clincher(TM) line of parallel shaft-mount gearmotors and speed reducers include: SK0182NB with gear ratios from 4.24:1 to 81.0:1, output speeds to 413 rpm and torque up to 1,027 lb-in.; SK0282NB with ratio from 4.03:1 to 139.0:1, output speeds to 434 rpm and torque to 1,443 lb-in.; and SK1382NB with ratios from 16.28:1 to over 381.0:1, output speeds to 107 rpm and torque to 3,275...

Power Relay provides high capacity in compact size.

Pb- and Cd-free NAiS Brand LZ 16 Amp, Form A and Form C power relay has high insulation resistance due to 10 mm creepage and clearance, providing protection from noise and surges. Low-profile unit measures 1.134 in. long, 0.492 in. wide, and 0.618 in. high. It operates at 185 deg F (class B) or 221 deg F (class F) and has low operating power of 400 mW. Applications include ovens, refrigerators,...

Ultrasonic Level Switch clamps on to outside of tank.

Non-invasive Visi Vue(TM)/Sonic Eye(TM) monitors predefined high/low level point in liquid storage vessels. It uses two sonic transducers with stainless steel housings mounted outside tank wall to determine if liquid is present within vessel at that point. It can be used on vessels or tubing from 1/16 in. to 100 ft dia. Vessel wall thickness can vary from 1/16 to 1/2 in. Vessels can be stainless...

How to Select a Rubber Compounding & Mixing Supplier

To learn more about rubber compounding and mixing, and how experienced manufacturers like AirBoss can meet your needs, download this whitepaper now.

Thermal Disconnects are self-extinguishing.

Thermal Disconnects have open barrel F-crimp connection and fire-retardant nylon insulator with high temperature alloy, which maintains spring characteristics of brass when subjected to 150 deg C. Straight and flag styles mate with .110 in. x .020 in., .187 in. x .020 in., and .250 in. x .032 in. NEMA male tabs. Disconnects are V-0 rated per UL 94 and produced to NEMA specifications.

Linear Motor offers high force-density operation.

Direct-drive, brushless, DC Model 4020-6 incorporates single integral moving shaft and measures 6.2 in. OD by 6.9 in. long. Alternating polarity neodymium-iron-boron magnets deliver force of 1125 lbf at peak, DC current of 30 A, and peak power of 5.2 kW. Built-in bearing system incorporates self-contained structure in stroke lengths of 2, 4, 6, 8, 10 and 12 in. Linear resolver, encoder, and...

Reed Sensors mount on any fixed surface.

MK20 Series Cylindrical Reed Sensors are magnetically operated reed proximity switches available in 3 versions with 10-15, 15-20, and 20-25 AT magnetic sensitivity. Potted inside plastic case, sensors measure 0.118 in. OD by 0.335 in. long. They have 5W contact rating, 175 Vdc or Vac peak switching voltage, 0.25 A switching current, 0.5 A carry current, and 300 mohm static contact resistance....

DC-DC Converter generates regulated output.

Switched-capacitor ZXCP330E6 provides 3.3V output from 2 to 4.4 V input with maximum load current of 40 mA. Short-circuit and thermal-overload protected, SOT23-6 packaged converter suits lithium-ion and alkaline battery-powered products. Operating with flying capacitor of 220nF and 10 microF bypass capacitors at input and output, typical PCB area requirement is 8 x 5.3 mm. It draws 20 microA...

Seal Plates facilitate O-ring installation.

Code 61 and Code 62 Seal Plates provide proper alignment and squeeze on O-rings when joining 2 surfaces. Outer diameter is grooved to center and improves O-rings' loading. Plates incorporate optional integrity support rings for structural support of 2 inner joined surfaces. These support rings eliminate seal damage.

Microstepping Motor/Driver provides high-accuracy positioning.

Modular, open-framed Nanostep(R) CFKII Series 5-phase microstepping motor and driver is available in high-torque motor frame sizes: 1.1, 1.65, 2.36, and 3.35 in. sq. Holding torques range from 4.6 oz-in. (CFK533AT) to 890 oz-in. (CFK5913HAT), and position accuracy is rated at +/-3 arc-minutes. Unit provides 16 user-selectable resolution settings up to 125,000 steps per revolution. Open-loop...