New Electrical Equipment & Systems Products

LED and LED Driver ICs simplify designs within displays.

Surface-mount QTLP6XX series low VF LEDs offer low voltage operation and narrow forward voltage range without requiring auxiliary circuitry. FAN56XX LED driver ICs accommodate architectures from serial and parallel to matrix configurations and use active matching techniques. Offered with built-in digital, analog, and PWM control, products allow LED current to be programmed with 1 external...

Relays meet IEEE 587 requirements.

AZ8 and AZ942H relays meet 6 kV lightning surge test outlined in IEEE 587. Relays withstand positive and negative 1.2 x 50 Ã-µs, 6 kV unidirectional pulses and 0.5 Ã-µs-100 kHz, 6 kV ring wave from contact to coil. Relays have 3 kV rms dielectric strength rating from contact to coil. High surge-voltage withstand capability is desirable in devices that are connected to AC mains, such as...

Coaxial Tree Relay Modules offer 1 or 4 coaxial trees.

Model SMP6103, with one 1 x 31 Coaxial Tree, and SMP6301, with four 1 x 4 Self-terminated Coaxial Trees, ensure that crosstalk and isolation specifications are maintained by using RF relays with bandwidths that exceed 2 GHz. Offered with low-loss coaxial interconnect cabling, modules are configured to avoid unterminated stub effects. Additionally, modules can be combined with other SMIPII(TM)...

DC/DC Converter is offered in SIP package.

Non-isolated NiQorÃ-® series, with on-board input and output filtering, eliminates need for I/O capacitors. Point-of-load converter series has 3.0-3.6 V input range and delivers up to 15 A of current at 2.5, 1.8, 1.5, 1.2, and 0.9 V. Unit measures 2.0 x 0.55 x 0.335 in. and can be configured in vertical or horizontal orientations. Module employs synchronous rectification to achieve...

Direct Drive Linear Motors for Food/Beverage, Medical/Pharma & Packaging Applications

This eBook provides an overview of how direct drive linear motors can be an essential part of an efficient design ensuring the equipment operates and performs as intended.

Cables suit zone-cabling applications.

Multi-pair cables, with 25-pair Power Sum Category 5e design, provide flexibility to designers, integrators, OEMs, and end-users in interconnect and zone cabling applications. Cables can be used with existing 50 pin RJ-21 connectors while delivering full Cat 5e performance in zone-cabling architecture. Product is ITS ETL SEMKO verified to meet ANSI TIA-EIA 568B.2 Category 5e standard, and is...

DC/DC Converters offer vertical and horizontal configurations.

Series LSN D5 non-isolated DC/DC converters accept 5 V inputs and deliver 1, 1.2, 1.5, 1.8, 2, 2.5, and 3.3 V outputs, fully rated at 10 A. Plug-and-play units come in single-in-line packages with standard pinout. They are designed with on-board input/output caps fully rated to handle required input ripple current and are capable of reducing output noise to specified levels. Power density is...

Connectors come in 68 and 80 position models.

Small Multiple Connectors are offered in vertical male and female and right angle male configurations. Designed with 1.27 x 1.27 mm grid and high temperature LCP insulator material, units are guaranteed for 500 mating cycles. Termination options include SMT, Pressfit, and IDC. SMT mounting clip ensures reliable connection to board. Connectors are offered in tape and reel and with cover for...

Ceramic Insulators suit electrical and thermal environments.

Machineable ceramic components perform in environments with temperatures to 1,000Ã-

Safety Monitoring Relays operate with up to 11 safety outputs.

Model SR18A relays offer dual channel inputs with 3 configuration possibilities, 5 safety outputs, selectable automatic/manual reset function, and 2 auxiliary outputs for status monitoring. Units are 90 mm wide, mount to 35 mm DIN rails, and contain 5 LEDs for status and diagnostic indication. Models SR19E units offer 3 additional safety outputs, automatic reset function, and 1 less status LED...

Terminal Blocks suit printed circuit board applications.

Euro Mag Model EM3583 IDC Pluggable Block and Model EM3593 Header are molded of green polyamide Type 6/6 94V0 with brass, tin-plated contacts. Rated at 6A, 160 V, blocks operate from -40 to +221Ã-

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.