New Electrical Equipment & Systems Products

Connectors are pre-insulated and UL listed.

ClearChoiceÃ-® NIMBUS(TM) Connectors are offered in single-sided and dual-sided, multi-tap models, as well as in-line or offset splicer-reducer configurations. Dual rated for copper or aluminum conductor, connectors feature removable plugs for entry-port closure.

Connector System joins dual monitors.

Model DMS-59(TM) connects multiple digital and analog monitors to low-profile PCI and AGP graphic cards. Product incorporates LFH(TM) (Low Force Helix) contacts and voided pin, used as keying mechanism. Meeting VESA(TM) requirements for impedance, cross-talk, and skew, system consists of 59-circuit receptacle and cable plug adapter. Unit may be connected to 2 DVI-D receptacles, 2 VGA receptacles,...

Mezzanine Connectors feature plated plastic housing.

Plateau HS Mezz(TM) Connectors support differential data rates in excess of 10 Gigabits/sec. Designed for stack heights from 9-25 mm, connectors feature SMT differential pitch and 2 points of contact on each signal interface. Plated plastic housing provides full shielding of each pair of differential contacts. Molded plated pegs on housing facilitate attachment to PCB ground plane. Applications...

Chassis mounts in standard 19 in. racks.

Short-length MicroBox(TM) chassis offer rack-mount flanges on 3- and 5-slot units. Also mountable to any stable horizontal or vertical surface, 3-slot chassis come with 3 ISA or 2 PCI plus one PISA slot, while 5-slot models come with 5 ISA slots: 3 PCI, one PISA, and one ISA. Less than 2 RU high, 3-slot chassis come with one 3.5 in. drive bay. Measuring less than 3 RU high, 5-slot chassis come...

TOP 3 SEAL TROUBLE SIGNS and HOW TO FIX IT

If ignored, broken seals can lead to a loss in production and equipment shut down. For more information on seals and seal repairs, download now.

Host Connectors are suitable for XFP standard modules.

Right-angle SMT Host Connectors, for 10 Gigabit XFP Small Form Factor Pluggable Modules, feature 0.8 mm pitch, 30-position design. They are suitable for connecting switches, routers, and other storage equipment. Both XFP modules and host system are hot-pluggable.

Fiber-Optic Switch allows use of 2 separate ports.

QuickSwitch 4185 Fiber Optic Switch/Converter allows user to access 2 separate fiber-optic 100 Base FX ports from 100 Base TX Fast Ethernet port. Fiber optic/twisted pair copper conversion is built in and unit is compliant with 802.3u 100 Base TX/FX standard. Ports A and B are 1300 nm, SC Duplex, Multimode, 100 Base FX fiber optic ports. COMMON port is 100 Base TX Fast Ethernetport. Front-panel...

Vibration Isolators protect embedded PC/104 electronics.

Shock Rocks(TM), made of 59-durometer SilasticÃ-® silicone rubber material, reduce g-force frequencies on 3 axes by up to a factor of 10. Designed to attach to outside perimeter of 4 x 4 in. PC/104 railed card cage, Shock Rocks isolate all points of contact between removable aluminum card cage and surrounding enclosure, eliminating need for PCB standoffs/spacers. Up to 14 PC/104 modules can...

Power Supply operates at full loads to 60-

Model R65 65 W single output power supply unit features universal autoranging input voltage of 90-265 Vac. Five models are available with output ratings ranging from 5-48 V, with continous output power of 65 W, and currents from 1.35-12 A. Short circuit protection, 1% Vp-p at max load, and +1% line and load regulation are included. Power supply provides full compliance to industrial and...

Ethernet Blade converts copper link to fiber link.

INTELLAPATCH Switches with multi-rate Ethernet functionality enable cable management, failover, and security applications. Blade provides ability to convert incoming copper link to fiber link, and vice versa, and supports Ethernet, Fast Ethernet, and Gigabit Ethernet over copper simultaneously. INTELLAPATCH switches, outfitted with 10/100/1000 Ethernet blade, provide non-blocking, any-to-any...

Battery Charger suits small scissor lifts.

SuperCharger, designed for Models MX and X electric scissor lifts, has waterproof rating to avoid damage from pressure washing. It provides auto-seek voltage ranging from 90-250 V, coupled with 50-60 Hz cycle range. Unit will charge batteries from empty up to 98% of their capacity. Low voltage cut-out helps prevent high amperage spikes from running batteries too low.

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.