Custom Manufacturing Services

Nordson ASYMTEK Demonstrates Precision Dispensing and Coating at SMT Hybrid Packaging, SmartTec Stand #7-219
Dispensers

Nordson ASYMTEK Demonstrates Precision Dispensing and Coating at SMT Hybrid Packaging, SmartTec Stand #7-219

Participating in Future Packaging Line for Electronics with NexJet System See Nordson ASYMTEK at SMT Hybrid Packaging 2013 - Nuremberg Hall 7, Stand #219 (smartTec GmbH) Hall 6, Stand #434 (Future Packaging Line) Carlsbad, CA, USAÂ- – Nordson ASYMTEK, a leader in dispensing, coating, and jetting technologies, will demonstrate its SelectCoat® SL-940E conformal coating system with dual...

Read More »
Assembly Services

Printed Circuits, Inc. Invests in Pluritec Automatic X-Ray Registration System

Printed Circuits, Inc. (Minneapolis, MN) purchased a new Pluritec Inspecta Combo HPL X-Ray registration system, or a Smart Drill" to improve registration on complex rigid flex manufacturing. The new drill uses X-Rays to locate fiducials on each layer along the perimeter of the panel.Â-  The machine then optimizes the drill program to fit any dimensional shift, skew or rotation in the layers,...

Read More »
Brian Vickers Races #55 Jet Edge Toyota Camry to 11th Place Finish at Martinsville Despite Wreck, Slit Tire
Cutting Services

Brian Vickers Races #55 Jet Edge Toyota Camry to 11th Place Finish at Martinsville Despite Wreck, Slit Tire

MWR Uses Jet Edge Waterjet to Cut 1,000 Parts for Each of Its Racecars ST. MICHAEL, Minn.– Unstoppable Michael Waltrip Racing driver Brian Vickers drove the #55 Jet Edge Toyota Camry to a respectable 11th place finish Sunday at Martinsville Speedway despite suffering major damage during a multi-car wreck on lap 180 and cutting a tire with only 50 laps to go. Vickers started third and raced in...

Read More »
DCHN, a Subsidiary of Katahdin Industries, Inc. Receives ISO-13485 Accreditation.
Anodizing Services

DCHN, a Subsidiary of Katahdin Industries, Inc. Receives ISO-13485 Accreditation.

Woonsocket, RI - DCHN, LLC is proud to announce that it received the accreditation for ISO-13485:2003, in addition to its continued accreditation to ISO-9001:2008. ISO-13485 represents the requirements that medical device manufacturers must incorporate into their management, engineering, distribution and quality systems. Receiving ISO-13485 is another example of the on-going investment DCHN has...

Read More »
Rubber

KRAIBURG TPE to Exhibit at Feiplastic 2013

Leading Global Supplier of Thermoplastic Elastomers (TPEs) to Make Debut at Brazilian International Trade Show DULUTH, Ga.– KRAIBURG TPE has announced its participation at the Feiplastic 2013 trade show May 20-24 in SÃ-£o Paulo, Brazil. This will be the first appearance for KRAIBURG TPE Americas at Feiplastic (Stand C-83). The decision was made to participate in this year’s trade show due...

Read More »
Additive Manufacturing Systems

Applied Rapid Technologies adds Somos NeXt LV Grey to Materials Lineup

Somos NeXt LV Grey is a high impact nylon-like Stereolithography resin FREDERICKSBURG, VAÂ- – Applied Rapid Technologies Corporation (ARTCORP), a leading provider of rapid prototyping and short-run production solutions announces the addition of DSM Somos® NeXt LV Grey resin to its stereolithography materials portfolio. This resin is the latest development in the high-performance,...

Read More »
Sprayers

Industry-Leading SCS Precisioncoat to Be on Exhibit at SMT Hybrid Packaging 2013

Indianapolis, IndianaÂ- – The industry-leading SCS Precisioncoat spray coating and dispense system will be on exhibit at SMT Hybrid Packaging 2013 in Nuremberg, April 16-18, 2013. SCS Equipment Manager Brad Banfill will be available at the SmartRep stand, 7-419, to answer questions and assist in coating system demonstrations.  Visitors are also invited to join a presentation by...

Read More »
Assembly Services

VJ Electronix Reports Increase in Summit LX Large Board System Orders

VJ Electronix, Inc., the leader in rework technologies and global provider of advanced X-ray inspection systems, announces a recent increase in demand for its Summit LX large format PCB rework systems in its fiscal first quarter. With a high capacity 24 x 36 (610 x 915 mm) board support table and large area 8.0 or 11 kW bottom heater, the Summit LX is designed specifically for large boards. The...

Read More »
Submerged Arc Flux suits offshore welding applications.
Welders

Submerged Arc Flux suits offshore welding applications.

Accommodating applications requiring high strength after extensive post-weld heat treatment of up to 30 hr, Lincolnweld® 812-SRC™ carbon-neutral flux provides smooth bead appearance and exhibits moisture resistance. When welding with Lincolnweld LA-84, this flux will produce weldments with hardness values below 250 Hv10 and less than 1% nickel. Available in 50 lb plastic bag, this SAW...

Read More »
Abrasive Compounds / Media

Small Footprints Herald Big Changes

BLOOMFIELD, CT.Â- – Aquajet Cutting Technology a division of Aerospace Alloys, Inc.; a four time United Technologies Corporation Supplier Gold award winner, today revealed dramatic changes in abrasive waterjet cutting technology.  Aerospace Alloys CEO Chris Allinson, a recognized leader in the industry, announced that with their partnership with Techni Waterjet, they are...

Read More »

All Topics