Norheat Completes Project at McConway & Torley
Norheat Treatment Inc. recently completed an austenitizing furnace project that incorporated the application of a proprietary high-temperature, energy-efficient ceramic coating on the hot face of the refractory insulation to eliminate shrinking and devitrification of the ceramic fiber and hot spots on the furnace shell. The project consisted of coating the entire furnace sidewalls, door and roof...
Read More »
FMC231 Mezzanine Card Features Input/Output, Clock and Trigger Interface
FMC231 FPGA Mezzanine Card is embedded with quad ADC and quad DAC. The ADC offers 16-bit conversion rates of up to 1.0 GSPS using TI ADS54J60 and up to 2.8 GSPS with TI DAC39J84. Unit’s internal clock frequency allows user to program and is capable of locking to external reference. Unit is suitable for applications such as radar, sigint/EW, broadband wireless, communication test equipment and...
Read More »
ITC Technical Ceramic Coatings Announces Data Results from North Carolina State University Product Installation
The company treated both the gas and Raku kilns at NCSU with its 100HT and 296A products. Results were a 30% reduction in gas consumption and kiln firing times were reduced by as much as 50%. "We were very pleased with the results of the applications and are expanding our markets into more ceramics hobbyists and manufacturers," said Mike Risley,spokesman for ITC. "These results speak to the...
Read More »
Meissner Will Host Guests at BPI West, San Francisco, CA, March 20 - 21, 2018
Meissner is pleased to announce its participation in the BPI West event, in San Francisco, California, on Tuesday, March 20th and Wednesday, March 21st, 2018. Meissner will be hosting guests in booth #516, at the Hilton San Francisco Union Square, where the Conference is being held. Meissner will be highlighting BioLink™ Modular Overmolding for single-use systems (SUS) with an interactive...
Read More »
Cold Forming: A Cost Effective Alternative to Machining Small Parts
Cold forming offers tight tolerances, dimensional stability, and advanced surface finishes, while also saving you in raw material wastes costs.
Read More »
GlobTek's PN MOL1B/C19505 Overmolds are molded on PVC or Silicone material cable jackets.
GlobTek’s PN MOL1B/C19505 Overmolds are designed for Molex 5557 series such as 39012060, 0039012060, 0039012065, 0039039062, 0455590002, and 0469920610. Units enables connector to withstand thousands of plug/unplug cycles. The combination of overmold and connector is suitable for round UL type 1185 of 2464 wire.
Read More »
Machining Design offers complex, high-quality lathe and milled parts.
Machining Design Associated Ltd offers 5-axis machining services that focus on enhancing versatility to client projects. This service helps in building 4D, 5D parts that can be directly translated to reductions in lead-time and improved part accuracy.
Read More »CNC Machining uses computer programming for exact inputs and precision.
Sun Glo Plating Company now provides small parts with high volume from two Swiss machines. The company is equipped with multiple vertical mills, 500MM horizontal mill, three dual spindle lathes ad two large lathes for turning a 36 in. diameter and 6 ft long piece.
Read More »
AAEON to Continue Support of AMD Geode Boards Through 2021
AAEON, a leading developer of embedded computer boards, is working with AMD to ensure that the CPU manufacturer’s popular Geode product line remains in service for many years to come. AAEON produces motherboards in a range of form factors that run on the LX800 processor. These boards take advantage of the processor’s design features to deliver high-speed, low-power computing with excellent...
Read More »
JadeFX® Model 5983 Carrier Board supports ANSI/VITA-66.4 optical interface.
JadeFX® Model 5983 3U VPX Carrier Board is suitable for connecting to IF, HF or RF ports of a communications or radar system. Unit comes with 9 GB of DDR4 SDRAM and optional GPS and 12 GB/sec VITA-66.4 optical backplane I/O. Unit’s optical interface enables up to 12 GB/sec backplane communication between boards. Product features x8 PCIe Gen 3 link that delivers 6.4 GB/s data transfers to...
Read More »
EVO Additive Manufacturing System features 7 in. MATRIX touchscreen display.
Featuring aluminum unitized frame and one-piece steel build platform and constructed in a rigid monocoque, EVO Additive Manufacturing System is used as prototyping and manufacturing tool for aerospace, automotive, medical applications. Designed with auto-leveling, multi-material printing and PartSave™ options, system is embedded with Tri-Heat™ enclosed build environment and...
Read More »
Custom Fabrication & Machining Services with Over 30 Years of Experience
As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.
Read More »
