Custom Manufacturing Services

Software

Hypertherm Announces Update for Its TurboNest and NestMaster CAD/CAM Nesting Software

HANOVER, NHÂ- – Hypertherm, a U.S. based manufacturer of advanced cutting systems, today announced a number of feature enhancements to its TurboNest® and NestMaster™ CAD/CAM nesting software. The updates announced today will make it even easier for companies that fabricate or cut metal to increase the cut quality, productivity, and profitability of their operations. The added...

Read More »
Sensors / Detectors / Transducers

Neptec's Unique Dust-Penetrating 3D Laser Scanner for Mining - Based on Its Innovative Space Technology - on Display at CIM Convention in Toronto May 5-8

OTTAWAÂ- – Neptec Technologies Corp., a spin-out of Neptec Design Group Ltd., an award-winning space flight technology company and NASA Prime Contractor, today announced that it will be exhibiting its new OPAL-360 series of obscurant-penetrating 3D laser scanners at the Planetary and Terrestrial Mining Sciences Symposium, held in conjunction with the Canadian Institute of Mining 2013...

Read More »
Additive Manufacturing Systems

Staples' First 3D Printing 'Experience Centre' Goes Live, Powered by Mcor Technologies

- Mcor's low-cost, full-colour, paper-based 3D printers enable Staples to make 3D printing accessible to everyone DUNLEER, IrelandÂ- – Mcor Technologies Ltd, manufacturer of the only line of desktop paper 3D printers in the world today announced that its IRIS full-colour 3D printers will be used exclusively in Staples' first Experience Centre" that has just opened at the Staples Office...

Read More »
Polyurethane Sealant adds glossy, protective finish to metal.
Sealants

Polyurethane Sealant adds glossy, protective finish to metal.

CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can...

Read More »
Computers

EPIC SBC maximizes spatial efficiency in embedded systems.

Measuring just 20.84 mm thick, Model EPC-CV1 is based onÂ- Intel® Atom™ N2600/N2800 CPU with onboard NM10 chipset. Board features AMD HD7410M chipset for video support, including 512 MB of dedicated video memory. HDMI is supported along with VGA and 24-bit Dual Channel LVDS. In addition to 8-bit digital I/O interface and 2 Mini PCI Express slots, EPC-CV1 features SIM card interface...

Read More »
Rubber

Ticona Fiber Reinforced Material Innovations on Display at ITB Automotive Mass Reduction Strategies 2013

Ticona, the engineering polymers business of Celanese Corporation, is showcasing fiber reinforced material innovations to reduce weight and save costs during the ITB Group Automotive Mass Reduction Strategies 2012 conference on Thursday, May 2, at the Sheraton Detroit Novi Hotel in Michigan. Ticona will highlight: • Celstran® continuous fiber reinforced thermoplastics (CFR-TP) tapes, rods...

Read More »
Presses

Precision Medical Products Inc. (PMP) Invests in Another Sodick Injection Molding Press, Model GA50

This adds additional capacity for its precision injection molding operations in its Denver facility.Â-  PMP is once again aligning with Sodick Plustech's signature V-Line" technology that separates the plasticizing and injection stages for better shot consistency and control.  Specialized Precision Molding (SPM), Shrewsbury PA, which was acquired by PMP in 2002, was the first molding...

Read More »
Milling Machines

Washington Mills: Milling to Fine and Sub-Micron Powders

Washington Mills, one of the world's largest producers of abrasives and fused mineral products, offers custom milling services for companies looking to grind small batches of materials to fine and sub-micron particle sizes. Washington Mills' pilot crushing and grading plant has the unique ability to mill small batches of material in both coarse and fine sizes. The finer sizes can be milled either...

Read More »
Miller Plastics Now Offers Large 5 Axis Plastic CNC Milling
Machining

Miller Plastics Now Offers Large 5 Axis Plastic CNC Milling

With the demand increasing for larger machined plastic parts along with more complex intricate parts Miller Plastics has added a new HAAS VR-8 for LARGE capacity plastic milling with 5 axis movement. The new HAAS VR-8 has a working envelope ofÂ-  64 long X 40" wide X 36" vertical movement.  The very large working area along with its 4th and 5th axis of movement gives Miller Plastics...

Read More »
Abrisa Technologies Offers Screen Printing on 80" Diagonal Glass for Display Applications
Glass

Abrisa Technologies Offers Screen Printing on 80" Diagonal Glass for Display Applications

Abrisa Technologies, a leading supplier of high performance flat glass for the display industry can now screen print on 80 inch diagonal soda lime or low iron float glass for a wide variety of applications including digital signage, ruggedized outdoor displays, and monitors. With the increase in demand for custom large format digital signage, having a qualified U.S. supplier for thin,...

Read More »

All Topics