Material Processing

Divider/Feeder provides representative samples.
Feeders and Feed Systems

Divider/Feeder provides representative samples.

PT 100 Sample Divider ensures that sample represents entire bulk instead of random samples taken out of buckets with spatulas or spoons. Rotating rifflers spilt up to 5 L of inhomogeneous samples with wide particle size distribution into 6, 8, or 10 representative sub-samples. DR 100 Vibratory Feeder ensures that divider is centered over inlet hopper for no-loss feeding. Feed rate is controlled...

Read More »
Steam Separator has no moving parts.
Separators

Steam Separator has no moving parts.

Eliminator removes entrained moisture, condensate, dirt, scale, and other contaminants in steam and compressed air systems. Internal baffle system extracts moisture and solids above 10 microns. System is self-draining without steam loss. Eliminator is available for operating pressures to 600 psig and capacities to 35,000 lbs per hour, with 1/2 to 2 in. NPT or socketweld connections, or 2 1/2 to 6...

Read More »
End Mills are available uncoated and TiAIN coated.
Mills

End Mills are available uncoated and TiAIN coated.

WavCut(TM) multi-flute end mills utilize sinusoidal wave on cutting edges. Rake geometry forms hollow chip for chip evacuation, and heat-treated M42 cobalt material with drawn shanks results in heat resistance and additional strength. WavCut I end mills have constant rake, while WavCut II end mills have variable rake. They are available with 4 (heavy profiling and corner work) or 6 (light to...

Read More »
Spray System coats metallic and non-metallic substrates.
Coating Equipment

Spray System coats metallic and non-metallic substrates.

Cold Gas Dynamic Spray (CGDS), based on thermal spray concepts, eliminates use of high temperatures. Materials are not melted in coating process. System applies powder coating materials such as aluminum, aluminum composites, copper, super alloys, silver, and titanium. System offers electrical conductivity, thermally conductive, and corrosion resistant properties. CGDS is suitable for metal...

Read More »
Liquid/Solids Separators vibrate solids away.
Separators

Liquid/Solids Separators vibrate solids away.

Liquatex(R) Separator uses vibratory motion produced by rotating eccentric weight at machine's center of gravity to remove solids from plant washdown wastewater, lint from laundry wastewater, and solids from cooking oil. Vertical component of motion accelerates breakdown of liquid surface tension, permitting uninterrupted flow of liquid through screen. Horizontal conveying component of motion...

Read More »
Compound Systems provide plastics mixtures and dry blends.
Batchers

Compound Systems provide plastics mixtures and dry blends.

Compound systems are capable of producing up to 12 tons/hr per line of finished product. Storage silos hold 150 tons of solids, with dust-free conveyors using dilute or dense phase pneumatic systems to convey material. All ingredients are systematically weighed, and micro-dosing station allows small amounts of solids or liquids to be added to each batch with accuracy of 5 grams. Systems are...

Read More »
Stainless Steel Mixer blends water and cleaners.
Impeller / Propeller / Turbine - Agitators / Mixers

Stainless Steel Mixer blends water and cleaners.

Force-Flo Aqueous Cleaner Mixer blends parts-cleaning chemicals with water for uniform emulsion at any proportion. Mixer is simple to operate, has no moving parts, and has fingertip control for fine adjustment of mixing ratios. Models are available in stainless steel, brass or nickel-plated, in rates of 3 and 10 gal/min, and in versions to accommodate 5 gal pails; 15, 30, or 55 gal drums; and 275...

Read More »
Mixers

Laboratory Mixers offer brushless DC motors.

D & A Mag-Drive(TM) Sealed-Vessel Mixers are available in 3 models. Their bodies seal vessel for pressure/vacuum operation or containment of hazardous materials in laboratory glassware. Magnetically coupled bench-scale mixers cannot de-couple. They offer in-line design, drop-in seal, and manually-adjustable, variable speed up to 2250 RPM.

Read More »
Slitter/Sheeter offers shaftless unwind.
Automation Systems

Slitter/Sheeter offers shaftless unwind.

Roll-Fed System slits and sheets rolls of material weighing up to 8,000 lb. Material is slit, accumulated through controlled gravity loops to restrict material stretch, and cut using gap shear cutter. Gripper stacker grabs sheets and stacks them for use. Operator needs only to load roll, adjust sheet length and slit width, and unload stacks of finished material for next processing operation.

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics