New Sanitary Rotary Batch Mixer with Internal Spray Line
Model 700-TH-40-SS available with useable batch capacity of 40 cu.ft. and total capacity of 82 cu.ft. Constructed of stainless steel finished to sanitary standards. Design eliminates the need for an internal shaft with seals contacting material.
Read More »
High Viscosity Dispersers mix heavy pastes, viscous liquids.
Capable of handling viscosities up to several hundred thousand centipoise, heavy-duty Bow Tie Dispersers are driven by explosionproof, inverter-duty motor. Air/oil hydraulic lift raises and lowers agitator into vessel, and agitator wets out solids and incorporates them into- liquid vehicle. This creates uniform consistency, while safety limit switches prevent operation of mixer while in raised...
Read More »
Automated Powder Feeding and High-Speed Mixing Skid System
Hauppauge, NY – Designed for automatic ingredient additions and high-speed mixing, the pictured Solids/Liquid Injection Manifold (SLIM) Mixer is piped to a 400-gallon jacketed tank and mounted on a compact skid. Flow meters, load cells, solenoid valves, level sensors and thermocouples are all integrated into a PLC Recipe Control Panel. Each ingredient addition and each step in the mix, drain...
Read More »
Ultra-High Shear Mixer with Powder Injection Technology
Hauppauge, NY — The Ross PreMax is a batch-style rotor/stator mixer designed for ultra-high shear conditions and vigorous flow, an ideal combination that supports high-speed production of fine dispersions and emulsions. Its patented Delta mixing head runs up to 5,000 ft/min and produces a double vortex that pulls product from the top and bottom of the rotor while simultaneously expelling...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
Ultra-High Shear Homogenization and Particle Disintegration
Hauppauge, NY – The Ross MegaShear Ultra-High Shear Mixer is designed for homogenizing dispersions and disintegrating large solid particles or droplets suspended in liquid. A unique inline rotor/stator design, the MegaShear's mixing head (US Patent No. 6,241,472) turns at tip speeds well over 11,000 ft/min and generates extremely complex flow patterns without sacrificing throughput. This...
Read More »
Planetary Disperser features 10 gallon capacity.
Combining dual-bladed disperser with helical planetary stirrer, PowerMix Model PDM-10 disperses powders, fibers, or other solids into liquid. As material thickens, combined mixing power of agitators can continue to apply high levels of shear even after product has reached viscous, non-flowing state. Vacuum-rated mixer features portable mix vessel, air/oil hydraulic lift to raise/lower agitators,...
Read More »
Planetary Mixers have sealed, purged gearbox assemblies.
Ross Planetary Mixers are available with sealed and purged gearbox assemblies for sensitive applications requiring tight protection against contamination. Ross 40 gal Double Planetary Mixers, designed for sanitary formulations, feature 2 rectangular planetary blades that rotate on their own axes while they orbit mix vessel on common axis. Stainless steel, heavy-duty, sealed gearbox housing...
Read More »
Homogenization Tester evaluates in-line process feasibility.
Suited for manufacturers of dispersions, emulsions, and slurries, Sanitary Homogenization Test Laboratory evaluates particle size reduction and de-agglomeration manufacturing processes. System utilizes dynamic in-line mixer or high shear colloid mill featuring rotor-stator mixing technology that exposes 100% of product to same shear action, with no bypass. Comprehensive test report with...
Read More »
In-Line Mixer facilitates powder induction in liquid stream.
Suited for rapid introduction of difficult to wet solids, In-Line SLIM Solid-Liquid-Injection-Manifold System combines mixing of powders and liquids simultaneously by injecting powders directly into high-shear rotor/stator mixer, where powder is immediately dispersed into liquid stream. System includes progressive spiral porting, which enables it to operate without pump or eductor, providing...
Read More »Full Range of Solids/Liquids Processing Solutions from Lab to Production Featured at Interphex 2009 Show
IDEX Sanitary (Quadro Engineering Corp./Wright Flow Technologies) - Booth No.: 736, will be showcasing their full range of solids/liquids processing solutions at Interphex 2009, in the Jacob K. Javits Convention Center, NYC (March 17- 19, 2009). The Solids Division of Quadro Engineering Corp. will feature key technologies such as the Quadro-® Underdriven Series, the new Quadro-® FlexSift and...
Read More »
Eliminate Expensive Repairs with the Hot-Shot Pipe Thawing Machine
The new Hot Shot Pipe Thawing Machine delivers an innovative and highly effective approach to thawing frozen pipes. Easy to use and versatile, it is loaded with robust features that further suit it to many challenging environments. To learn all about it, see our video.
Read More »
