Surface Treatment Equipment

Nordson MARCH Wins 2017 New Product Introduction Award for its ModVIA Plasma System
Surface Treatment Equipment

Nordson MARCH Wins 2017 New Product Introduction Award for its ModVIA Plasma System

System doubles capacity for production demands Concord, California, USA - 7 March 2017 - Nordson MARCH, a Nordson company (NASDAQ: NDSN), a global leader in plasma processing technology, has won the 2017 New Product Introduction (NPI) Award in the Surface Treatment Equipment category for its ModVIA™ Plasma Treatment System. The Award, sponsored by Printed Circuit Design and Fab magazine, was...

Read More »
PlasmaDyne system features programmable treating heads.
Surface Treatment Equipment

PlasmaDyne system features programmable treating heads.

Easily integrating into folding production lines and including precise, adjustable handling brackets, PlasmaDyne is available with 1 - 4 heads, depending on the number of glue lines required. Delivering highly effective surface treatment for both conductive and non-conductive applications. Meeting surface treatment needs such as improving adhesion of coatings, laminates and glue system is...

Read More »
Surface Treatment Equipment

Walter Surface Technologies Announces New Innovations for Fabtech 2016 in Las Vegas - Booth N2704

Montreal QC / Windsor, CT November 10th, 2016 – Walter Surface Technologies, the global industry leader in surface treatment technologies, is pleased to announce that it will once again be exhibiting at the FABTECH Expo at the Las Vegas Convention Center in Las Vegas, Nevada, from November 16-18, 2016. Companies looking to improve quality and increase productivity in the workplace are invited...

Read More »
Atmospheric Plasma Cleaner features handheld design.
Surface Treatment Equipment

Atmospheric Plasma Cleaner features handheld design.

Operating with no external gas hookup, Plasma Wand is suited for spot cleaning and surface modification of large objects before bonding. By removing organic material and activating surfaces, product optimizes strength of bonds. Plasma cleaning works well on materials such as glass, plastic, rubber, and even metal. With treatment distance of 5–10 mm and treatment width of 5–20 mm, Plasma Wand...

Read More »
Designing and Specifying the Right Loudspeaker System for Emergency Mass Notification in Public Venues
Sponsored

Designing and Specifying the Right Loudspeaker System for Emergency Mass Notification in Public Venues

For every industry, there is nothing more crucial than having effective strategies for dealing with emergency situations. These are events you never hope for, but want the assurance of having the right solutions implemented when time is of the essence. Loudspeaker system optimization is essential when ensuring that communication is not lost when it is most needed. In this guide, you will learn about what key points to keep in mind when designing a loudspeaker system for your campus. This includes performing an on-site sound survey, selecting the right equipment for your applications, complementing your system with the right technology solutions, creating pre-assigned messages for different emergency situations, and having system accessibility no matter the circumstances. Download this guide for additional information on these public safety measures.

Read More »
Plasma System expands from 4 to 8 cells to increase capacity.
Surface Treatment Equipment

Plasma System expands from 4 to 8 cells to increase capacity.

Along with 65 x 69 x 97 in. chamber and 4–8 cell (8–16 panel) capacity, ModVIA™ provides technology to treat PCBs for desmear and etchback as well as provide surface activation. Integrated system accommodates diverse PCB panel technologies in various shapes and sizes, including rigid, flexible, through-hole, and blind via, and works with range of process gases: such as Ar, O2, N2, and...

Read More »

3DT's Popular MultiDyne Corona Treating System Now with Improved Treating Heads for Better Performance and Savings
Surface Treatment Equipment

3DT's Popular MultiDyne Corona Treating System Now with Improved Treating Heads for Better Performance and Savings

Germantown, WI, USA. – 3DT LLC of Germantown, Wisconsin has updated its MultiDyne corona treating heads from a molded head to an assembled one. This change assures a sturdier platform for consistent surface treatment. Additionally, should a component fail over time, it can easily and inexpensively be replaced; a cost-saving benefit to customers. MultiDyne improves adhesion on 3-D parts...

Read More »
Surface Treatment Equipment

Surface Cleaning/Preparation Solution uses wet-ice technology.

By producing frozen water particles and propelling them at high speeds, Generation One cleans, decontaminates, and prepares surfaces. Use of this industrial cleaning solution results in negligible airborne contaminants, no additional media, and zero chemicals. Able to replace existing methods that harms environment, this technology has been employed in such industries as petrochemical, pulp and...

Read More »
Surface Treatment System creates medical instrument tubing bond.
Surface Treatment Equipment

Surface Treatment System creates medical instrument tubing bond.

Harnessing arc plasma, TubeDyne Treating System treats medical tube ends for permanent bond to surgical instruments, housings, or other tubing (including catheters). Self-contained, compact, tabletop unit is PLC-controlled. Tubing up to 0.375 in. dia, with or without metal inserts, can be placed in holding fixture and receive gentle, uniform, 360° treatment at length of ~2.00 in. Operator...

Read More »
Atmospheric Plasma Treatment System offers functional versatility.
Surface Treatment Equipment

Atmospheric Plasma Treatment System offers functional versatility.

Used in integrated robotic cells, as standalone unit, or in production lines, PlasmaTEC-X is used for surface treatment of materials prior to gluing/printing/painting/coating. Built-in AirTEC system automatically ensures constant flow to discharge nozzle, and operator can set air flow during stand-by to avoid attraction of dust. Conceptualized around high-voltage DC Plasma discharge in...

Read More »
Surface Treatment Equipment

3DT's PlasmaDyne Surface Treating System is Revamped, Trimmed-Down, Yet Provides the Same Powerful Adhesion on 3-D Parts

Germantown, WI - A next generation PlasmaDyne from 3DT is ready for production. This improved plasma treatment system continues 3DT's tradition of effective cleaning and functionalizing of surfaces for a longer-lasting bond now includes state-of–the-art electronics and a user-friendly, lighter, smaller unit. PlasmaDyne utilizes the technology of plasma discharge to easily and safely create...

Read More »

All Topics