New Quick-Ship Program Available for Vibratory Screeners in Diameters of 18 to 60 Inch
Gravity-fed vibroscreen single-deck screeners available with screen meshes ranging from 2 mesh (11 mm) to 325 mesh. Operate on a batch or continuous basis, separating material into two fractions. Suitable for sifting, scalping and de-dusting of dry products and dewatering of solids-laden slurries, in sanitary and industrial applications.
Read More »
Centrifugal Sifter Quick-ship Program Announced by Kason
Millburn, NJ — Certain models of Kason Centri-Sifter™ centrifugal sifters are now available for shipment in 5 to 7 business days through a new QUICK-SHIP program announced by Kason Corporation. The program applies to a selection of standard gravity-fed models, as well as in-line pneumatic configurations of Centri-Sifter™ centrifugal sifters for sifting, de-agglomerating and dewatering of...
Read More »
New MUNSIFTER Centrifugal Sifter Features External Bearing at Both Shaft Ends
Designed to sift, scalp and de-agglomerate bulk solid materials and offered with #304 or #316 stainless steel constructions. Driven by 3 HP motor with speed of approximately 500 RPM. Using an auger the material is fed into the horizontal screen cylinder that is propelled by rotating paddles against screen.
Read More »
OSI Systems Receives $10 Million Order for ZBV® Mobile Cargo and Vehicle Screening Systems
HAWTHORNE, Calif.--(BUSINESS WIRE)--OSI Systems, Inc. (the “Company” or “OSI Systems”) (NASDAQ: OSIS) today announced that its Security division received an order valued at approximately $10 million for multiple units of its ZBV® mobile cargo and vehicle screening system, which are expected to be deployed overseas by a U.S. government customer. OSI Systems’ Chairman and CEO, Deepak...
Read More »
There's More to Plating than You Zinc!
To find out more about the seven demands you should make of your zinc plater, download now.
Read More »
Kason Presents FLO-THRU Sanitary Screener with Two Unbalanced-Weight Gyratory Motors
The FLO-THRU™ Sanitary Screener is available in diameters ranging from 460 to 2540 mm and is designed for scalping oversize particles and foreign material from dry bulk materials and solids-laden slurries. The unit’s design allows vertical alignment of the top inlet and bottom outlet. The screener features all stainless steel contact surfaces with continuous welds polished to cGMP, 3-A, USDA,...
Read More »
New BioQuantiPro CHO-HCP ELISA Kit is Designed with Validated Antibodies of Rockland
The BioQuantiPro™ CHO-HCP ELISA Screening Kit is used for detecting and screening of host cell protein contaminants in bioprocessing. The kit measures analytes from crude cellular harvests, cell culture lysates and process intermediates. It provides high coverage of generic CHO-HCP kits and low variability.
Read More »
New MOB-DD-SS Dual-Drive Centrifugal Sifter Enables User to Enter Speed of the Variable Feed Screw Remotely
MOB-DD-SS Dual-Drive CENTRI-SIFTER™ Centrifugal Sifter is available with 304 or 316 stainless steel contact surfaces with cantilevered shaft design without bearing and hinged end cover. Unit is offered with fail-safe interlock system that features multiple and non-interchangeable keys. Sifter enables independent speed control of feed screw and helical paddle assembly to maximize feed control...
Read More »
Industrial Sifter for 3D Printing Powders at New Balance
Russell Compact Sieve® paired with innovative ultrasonic technology increases throughput and prototype iteration at New Balance Established in 1906, New Balance Athletics, Inc., informally known simply as New Balance, is one of the world’s largest athletic shoe manufacturers. One of New Balance’s latest innovations is the addition of an additive manufacturing laboratory; along with the...
Read More »
New Quick-Clean Centrifugal Sifter Can Scalp Powders up to 100 tons (90 tonnes) per hour and Dewater Slurries at 500 gpm (1900 lpm)
Kason Corporation introduces quick-clean CENTRI-SIFTER™ centrifugal sifter with a cantilevered shaft for greater screening area. The shaft is supported by two bearings at infeed end and with no bearing at the discharge end. This helps in rapid cleaning, screen changing and inspection without the help of any tool. The sifter offers time-delay function for the operator safety and is constructed...
Read More »
ATLAS Gyratory Sifter is Embedded with Patented QuickChange™ Technology
ATLAS Gyratory Sifter is offered in 33 configurations with up to 12 screens ranging from 3m² to 73.5m² of screening area. Unit is suitable for use in chemical, food, plastics, agriculture and minerals industries. Sifter’s QuickChange allows for one minute screen change, which reduces the machine downtime. Unit comes with lubricated drive system, basket hangers and operator-friendly design.
Read More »
Micro Air's Dust, Fume, Mist Collection Equipment Facilitate a Safe Work Environment
Dust, fume, and mist collectors from Micro Air promote a safer, more productive work environment. Our wide array of products are available to the industrial manufacturing sector for processes such as welding, cutting, grinding, blasting, and more. Check out our video to learn more.
Read More »
