Wisconsin Oven Ships Horizontal Quench System to a Metal Casting Company
East Troy, WI – April 23, 2018 -- Wisconsin Oven Corporation announced the shipment of an electrically heated horizontal quench system to an aluminum casting company. The horizontal quench system will be used for solution treating aluminum castings for the aerospace and automotive industries. The solution treating furnace is designed to heat a 2,500-pound load of aluminum, plus basket and work...
Read More »
Wisconsin Oven Ships Horizontal Quench System to Aluminum Supplier
East Troy, WI – February 12, 2018 - Wisconsin Oven Corporation shipped two (2) electrically heated standard horizontal quench systems to an aluminum manufacturer. The systems are designed for the solution treatment of aluminum. Each of the horizontal quench systems are designed to heat 1,000 pounds of aluminum to a 950°F operating temperature. Once the loads are heated to the operating...
Read More »
Ultratech Receives Multiple Commitments For Laser Melt Anneal System Evaluation
Ultratech's LM7 Laser Melt Anneal System Targeted to Enable Contact Scaling and Improve Transistor Performance for 7-nm and Below Nodes SAN JOSE, Calif., April 5, 2017 - Ultratech, Inc. (Nasdaq: UTEK), a leading supplier of lithography, laser processing and inspection systems used to manufacture semiconductor devices and high-brightness LEDs (HBLEDs), as well as atomic layer deposition...
Read More »
Medical Manufacturer Chooses TITAN® System with Training and Full-Scale Support
CHERRY VALLEY, IL – Ipsen recently shipped a TITAN® H2 vacuum heat-treating system with 2-bar gas quenching to Costa Rica. There it will be used to manufacture surgical components. With its compact dimensions and superior quality, the TITAN helps companies accelerate the pace of innovation while satisfying the strict legal requirements of the Medical industry. This shipment included more than...
Read More »
Bulk Briner 101: What You Need to Know When Considering a Bulk Briner
If you're thinking about switching from packaged to bulk salt, check out this white paper and see if a bulk briner is right for your application.
Read More »Prepreg Injection Processes Benefit from Temperature Monitoring
dataTaker Handles High Channel Count for Heat Treatment Applications Plants and factories working with prepreg injection and other heat treatment applications can greatly benefit from continual temperature monitoring. Curing, molding, and automotive applications all save cost and improve PQ by using a data logger to record product temperatures. Temperature monitoring is equally applicable to...
Read More »
Ipsen Meets Diverse Industry Demands, Shipping 10 Heat-Treating Systems
CHERRY VALLEY, IL – Customers continue to rely on Ipsen equipment for high performance and quality results. Ipsen recently shipped ten heat-treating systems to customers in India, Vietnam and several U.S. states. This equipment will be used to process parts for the Aerospace, Commercial Heat Treating, Defense, Metal Injection Molding and Tooling industries. Among the shipments were a 6-bar...
Read More »Ultratech Receives Expansion Order from Asian Foundry for Laser Spike Annealing System
Order Further Validates the Continued Value Ultratech's LSA101 Systems Provide Foundries for 28-nm Production SAN JOSE, Calif. - Ultratech, Inc. (Nasdaq: UTEK), a leading supplier of lithography, laser-processing and inspection systems used to manufacture semiconductor devices and high-brightness LEDs (HB-LEDs), as well as atomic layer deposition (ALD) systems, today announced an expansion...
Read More »
Ipsen Delivers a Range of Atmosphere and Vacuum Heat-Treating Solutions Across the U.S.
CHERRY VALLEY, IL – In recent months, Ipsen has shipped 11 heat-treating systems across the U.S. to eight different states ranging from California to Massachusetts. This equipment will be used to process parts for companies in the Aerospace, Energy, Commercial Heat Treating and Coating industries. Among the equipment was a TITAN® H6 vacuum furnace, which was rented to fill a company’s...
Read More »Automotive Tier One Supplier Orders AFC-Holcroft Heat Treat Equipment to Process Aluminum Products
June, 2016: A Tier 1 automotive supplier located in the Midwest has placed (2) orders with AFC-Holcroft for the supply of heat treating equipment related to the processing of aluminum. The first order will consist of a Roller Hearth Homogenizing Furnace for processing aluminum products. The complete system includes a multi-position loading table, a multiposition furnace, cooling station and...
Read More »Belt Conveyor Oven reaches max temperature of 550°F.
Constructed with 4 in. insulated walls, aluminized steel exterior, and stainless steel interior, No. 866 offers 18 in. x 20 ft x 15 in. workspace, 60 KW installed in Nichrome wire heating elements, and 4,200 cfm, 3 hp recirculating blower that provides vertical downward airflow. Oven travel comprises 1 ½ ft long open belt loading zone, 20 ft long insulated heat zone with...
Read More »
560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance
EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.
Read More »
