Mixers (Fluid Blending)

Mixers (Fluid Blending)

Precision Welding Gas Mixer ensures efficient use of Helium.

Equipped with internal MPU to perform all necessary calculations and signal sending, Pegas 4000 provides means to control up to 4 individual component gases using thermal mass flow controllers. Concentrations can be adjusted on-the-fly or dynamic mixing schedules can also be preprogrammed via included software. After operator enters total flow and concentration of each component gas, front panel...

Read More »
Triple-Stage Inline Mixer produces minimal head loss.
Mixers (Fluid Blending)

Triple-Stage Inline Mixer produces minimal head loss.

Capable of producing 1.64 K value and typical CoV of 0.014, static mixer Model 3053 consists of length of pipe fitted with 1-3 sets of tabbed fins featuring precise geometry that turns flow inside-out for mixing liquids and gases. Fins are radially disposed inside pipe for thorough mixing with low head loss. Available fabricated from PVC, FRP, or 316 stainless steel, with or without PTFE coating,...

Read More »
Mixers (Fluid Blending)

More than the Minumum! Therm-O-Mix Station

Warminster, Pa. - A worker was splashed with a hazardous fluid. Following plant safety procedures, he immediately went to the nearest shower unit, started a full shower and almost immediately jumped out due to the cold water. Knowing the potential danger of chemical burns, 4 fellow employees forced him back into the shower, holding him in place for the required 15 minute washdown. By the end of...

Read More »
Mixers (Fluid Blending)

Fluoropolymer Static Mixer is offered in ½ in. version.

Furon® Static Mixer provide efficient way to mix 2 or more chemicals with minimal pressure loss. Compact, inline design enables installation into fluid handling systems, and mixing components are removable for maintenance and cleaning. All components are constructed from 100% virgin PTFE and high-purity PFA. Unit has no moving parts and outlet end connection types/sizes can be changed to...

Read More »
Static Mixer has no moving parts.
Mixers (Fluid Blending)

Static Mixer has no moving parts.

Capable of injecting 4 chemicals simultaneously, Model 2800 in-line static mixer mounts directly into piping system and features fixed-plate with internal design that rapidly mixes using combination of alternate vortex shedding and intense shear zone turbulence. Available in sizes from Â-¼ to 120 in. dia, unit can be made from PVC, FRP, SST, Titanium, Hastelloy®, and carbon fiber. It...

Read More »
Static Mixing Systems feature skid-mounted design.
Mixers (Fluid Blending)

Static Mixing Systems feature skid-mounted design.

Available in various materials of construction and up to 48 in. in diameter, LPD Mixing Systems are suited for low viscosity turbulent flow mixing of fluids and for gas-liquid mixing. ISG Mixing Systems, supplied in cast or machined materials for applications through 12 in. dia, include machined elements with passageways that guarantee mixing of any pumpable material. After passing through 10...

Read More »
Newly Upgraded Viega Mixing Station
Mixers (Fluid Blending)

Newly Upgraded Viega Mixing Station

Nov. 11, 2008 Viega Mixing Stations are now available in six upgraded base configurations. Features include low or high-head, three-speed circulators, new sensor wells and new ball valves. The upgraded Viega Mixing Station can be used in conjunction with various heat sources such as conventional and condensing boilers, water heaters and geothermal heat pumps. The red and blue caps on the...

Read More »
Mixers (Fluid Blending)

Mixing System allows anaerobic digestion in various markets.

Momentous Flow(TM) provides mixing for anaerobic digestion in wastewater, biofuels, and agricultural markets. It uses single Z/T=3.0 axial impeller and no baffles in upper part of vessel to create centrifugal force, which pushes membrane methane bubbles from anaerobic digestion to center of rotation. Methane then coalesces and escapes from liquid into collection cap. Mixing system also features...

Read More »
Static Injection Mixer blends additives into gasoline.
Mixers (Fluid Blending)

Static Injection Mixer blends additives into gasoline.

Used for blending ethanol and other additives into gasoline and other fuels, Static Mixer is heavy-wall 316 SS fixed plate which features orifice pattern that mixes by combination of alternate vortex shedding and intense shear zone turbulence to achieve greater than 98% dispersion within 10 diameters downstream. Designed to fit inside mating flange bolt circle of any piping system, mixer is...

Read More »
Hosedown Stations safely blend steam and cold water.
Mixers (Fluid Blending)

Hosedown Stations safely blend steam and cold water.

STVM-iLoc steam/water hosedown stations provide hot water by blending steam and cold water to required set temperature for washing down walls, floors, process equipment, and vehicles. Automatic station shutdown turns off system if temperature is raised 15°F above maximum set temperature or if cold water supply is interrupted. Designed to reduce effects of scaling and mineral build-up,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers