Walter Introduces Enduro-Flex ALU Flap Discs with Zirconia Alumina Grain Blend
The Enduro-Flex ALU™ Flap Discs are designed for use with heat-sensitive metals such as aluminum and non-ferrous alloys. The units are available in 4-1/2, 5, 6 and 7 in. diameter sizes with grit values of 40, 60 and 80. The discs come with Eco-Trim™ trimmable backing that improves disc life and are offered in ratings from 8,600 to 13,300.They are free from Iron, sulfur and chlorine and...
Read More »
Walter Technologies Introduces New Flap Discs for Polishing and Finishing Applications
Instant Polish™ and Ultimate Shine™ from walter deliver No.8 mirror finishes. The units are are available in 4-1/2 and 5 in. diameter sizes and are used at a maximum speed of 7,300 RPM. Instant Polish discs are suitable for use in automotive, transportation, aerospace and pharma industries. Ultimate Shine™ discs offers mirror finishes with Ra ratings under one micro-inch and are used on...
Read More »
POLIFAN® PSF Z-TRIM Trimmable Flap Discs are made of zirconia coated material.
POLIFAN® PSF Z-TRIM Trimmable Flap Discs are available in 4 ½ in. and 5 in. diameter with a 7/8 in. plain arbor hole or a 5/8-11 thread for threaded spindles. Units are suitable for surface grinding, weld grinding, blending, chamfering and deburring on steel and stainless steel. Products feature self-sharpening abrasive grain and are offered in grit sizes of 40, 60 and 80.
Read More »
Tiger BobCat Mini Flap Discs deliver consistent cut rate.
Suitable for weld blending or edge chamfering, grinding and finishing jobs, Tiger BobCat Mini Flap Discs deliver three times more efficiency than the blending discs and one and half times greater life than original flap discs. Units are available in angled and flat styles in 2 in. and 3 in. diameters and features “R” mount and threaded arbor “S” mounts. Discs are designed for use on right...
Read More »
The Next Wave of Intelligent Design Automation
In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.
Read More »
FLEXSTEEL™ Flap Discs are made of self-sharpening abrasive grains.
Used for blending sharp corners, heavy blending in fillet welds, FLEXSTEEL™ Flap Discs feature specially designed zirconia alumina abrasive grain blend. Units come with Walter’s unique Eco-Trim backing for extended disc life. Designed for use on steel in industrial, metal fabrication and construction applications, discs can withstand lateral pressure for removing material from corners and...
Read More »
Polifan® Z SG-Power Flap Discs can deal with high contact pressure.
Used on stainless steel and steel, Polifan® SG-POWER Flap Discs are available in conical shape with 4 1/2, 5 and 7-in. diameters in either 5/8-11 threaded or 7/8 in. plain arbor holes. Designed in 40 and 60 grit sizes, discs are suitable for working on weld seams, chamfering and surface grinding steel. Device delivers optimum stock removal on high-powered angle grinders at higher contact...
Read More »
Plantex Ceramic Flap Discs feature abrasive structure.
Available in 4-1/2" and 5" diameters and in grits of 40, 60 and 80, Plantex Ceramic Flap Discs feature backing plate made of polypropylene binder. Delivering speeds of 5000 to 8000 rpm, unit’s hemp fiber provides high insulating, vibration damping and noise-reducing properties. Suitable for grinding all metals including stainless steel, steel, aluminum, titanium, bronze, flap discs...
Read More »Red Heat R983 Abrasive Belts and Discs contain no performance-inhibiting dies.
Wear resistant, Norton Red Heat R983 suite of products comes with enhanced grain/bond adhesion. Designed for grinding and polishing metals, R983 Flap Discs are available in three shapes and in sizes ranging from 4" x 5/8" up to 7" x 7/8". R983 Discs are available in TS (Type II) and TR (Type II) in sizes ranging from 1-1/2" to 3". R983 Belts come in lengths ranging from 11" to 700," stand widths...
Read More »
Tiger Angled Flap Discs come with self-sharpening zirconium flap disc.
Available in 7/8-inch arbor or 5/8-inch -11 nut for fast change-over, Tiger Angled Flap Discs features 90° angled flap design which allows operator to grind at higher or lower angle. Featured with phenolic blocking, units reduce the risk of gouging of workpiece while grinding fillet welds for smoother finish. Suitable for grinding steel, stainless steel, aluminum and other hard-to-grind metals,...
Read More »
Weiler to Introduce New Product Offerings at FABTECH 2016
Attendees of FABTECH can explore a variety of product offerings and product line upgrades at booth N3704 CRESCO, Pa. — Weiler Abrasives Group, a leading provider of abrasives, power brushes, and maintenance products for surface conditioning announced it will attend FABTECH 2016 in Las Vegas, November 16 to 18 at booth N3704 at the Las Vegas Convention Center. The company will showcase a variety...
Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.
Read More »
