Material Processing

Heat Exchanger cools electrical control cabinets.
Exchangers

Heat Exchanger cools electrical control cabinets.

Model WW4000S water-to-air heat exchanger, housed in 19.69 x 31.50 x 7.09 in. enclosure, is suited for operation in extremely polluted and high temperature environments. Its design employs internal thermostat and 2 fans that produce 648 cfm air flow. Cooling water flow of 3.5 gpm at 50°F produces 5000 W of cooling capacity when temperature difference between water inlet and ambient is...

Read More »
Continuous Dryer produces particles of uniform size.
Rotary Dryers

Continuous Dryer produces particles of uniform size.

Micron Dryer combines milling, drying, and classifying in high-capacity unit to produce free-flowing powders with uniform moisture content. It also performs solvent retrieval and internal backmixing. Capacities range from 100 to over 4500 lb/hr. Body consists of vertical cylinder with grinding rotor, hot air inlet, and classifier. Applications include pigments, magnesium hydroxide, magnesium...

Read More »
Agitation Systems are custom designed.
Tanks

Agitation Systems are custom designed.

Kettles and tanks can be custom produced with features found on company's standard equipment. Custom agitation systems can include inclined agitators, vacuum pressure designs with mechanical seals, heavy-duty designs to 2,000,000 CPS, and custom pharmaceutical grade finishes (including electropolish).

Read More »
Compactors feature electro-hydraulic design.
Crushers

Compactors feature electro-hydraulic design.

T-REX Series consists of compactors, oil filter crushers, and cutters available in range of sizes, styles, and capacities. Series P hydraulic presses can reduce size of materials including paper, cardboard, plastics, foam rubber, bottles, fabrics, and leather into small bale. Series SB presses have same advantages of Series P, but are designed for smaller requirements such as companies who want...

Read More »
Laboratory System screens/characterizes/optimizes reactions.
Testers

Laboratory System screens/characterizes/optimizes reactions.

MultiMax(TM) and MultiMax ART (Automated Reactor Technology) modular, multi-reactor systems consist of 3 reactor stations which house 2, 4, or 16 reactor positions with working volumes from 1 to 250 mL. Reaction temperatures can be independently controlled from -30 to +180°C. Reactor stations can be operated as stand-alone or automated on MultiMax ART platform. Stand-alone operation...

Read More »
Impactor features portable design.
Crushers

Impactor features portable design.

Universal 5160 Impact Master Primary Portable Plant is equipped with 20 ft vibrating grizzly feeder, front delivery conveyor, and fold-down hopper wing. It features 4-axle, single chassis design and provides 550 TPH crushing capability. With quick set-up and tear-down time, machine is suitable for quarry and recycling jobs.

Read More »
Mixers feature leak-proof drywell design.
Impeller / Propeller / Turbine - Agitators / Mixers

Mixers feature leak-proof drywell design.

QÂ-·E·DPlus(TM) Mixers have cast iron housing and are available for shaft speeds of 44, 70, 88, and 117 rpm. Standard NEMA C-flange motors range from 1-5 hp. Mixers offer minimum 30,000 hr L10 bearing life and tapered shaft engagement system for easy disassembly. Stuffing box and lip seals are included for closed tanks. Shafting is oversided by ¼ to ½ in. over...

Read More »
Processor Blades are PICMG 2.16 compliant.
Switches

Processor Blades are PICMG 2.16 compliant.

Single-slot Model cPB-4325 offers choice of one or two 933 MHz Intel Pentium III processors with 512 KB L2 caches. Model cPB-4321 comes with 1 GHz Intel Pentium III processor, with 256KB L2 cache and 440GX chipset with 100 MHz front side bus. Model cSB-4240 hot-swappable Managed Layer 2/3 switch provides 2 Gigabit and 24 Fast Ethernet ports in 6U x 4HP CompactPCI form factor blade. Model...

Read More »
Aligners

Laser Microgage provides machine alignment.

Microgage 2D consists of laser transmitter and square receiver. It delivers precision of 0.001 in. and can be used for measuring in 2 axial directions at same time, even when distance between laser and receiver varies as much as 70 ft or more. Processing unit provides measurement readings in X and Y axes and offers controls for zeroing readings. RS232 interface provides data for PCs and laptops....

Read More »
Ejector Sleeves offer expanded lengths to 12 in.
Ejector Sleeves

Ejector Sleeves offer expanded lengths to 12 in.

Ejector Sleeves are machined from H-13 hotwork die steel and ion nitrided to Rc 65-75 on inside and outside diameters for wear resistance. Precision ground with +.0005-0000 in. ID tolerance and OD tolerance of -/0003-0008 in., standard sleeves are available from 3 to 12 in. long with 3/32 to 3/4 in. IDs. Special Sleeves can be machined from 420 and 440 stainless, A10, S-7, and M-2 steel as well...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers