Material Processing

Deal Trays offer security solution.
Miscellaneous Trays

Deal Trays offer security solution.

Shuresafe® Deal Trays provide pass-through system when installed in countertop with wall below and glass security window above. Model 670094 has stationary base with sliding stainless steel tray. Three stationary models are available ranging in size from 8-12 in. wide.

Read More »
Skid Steer Hammer Attachments offer more power with less weight.
Hammers

Skid Steer Hammer Attachments offer more power with less weight.

Breakers range in weight from 430-1,100 lb. Smallest model has tool energy rating of 70.11 lb-ft/blow, while largest breaker has rating of 468.63 lb-ft/blow. Valve system uses less oil flow to do same job as higher flow breakers. Air check valve system allows units to be submerged in water while working. Shorter size increases operator visibility in small tight areas.

Read More »
Blast System provides continuous, in-line operation.
Abrasive Blast Equipment

Blast System provides continuous, in-line operation.

Model SP-900 through-feed blast system offers surface treatment of tube, pipe, and strip that is 1.5 in. in diameter or less. Six pressure-blast nozzles are fed by 12 ftÂ-³ capacity vessel that recharges itself automatically without interruption of grit flow. Interior of 60 x 72 x 48 in. cabinet is divided into 3 chambers to isolate noise and dust of blasting operation. Conveyance of work...

Read More »
Extraction/Reaction System handles supercritical fluid media.
Supercritical Fluid Extractors

Extraction/Reaction System handles supercritical fluid media.

Model SFT-150 comes with 100 ml hand-tight sample vessel and can accommodate pressure vessels up to 4 L capacity. Stainless steel vessel contains supercritical fluids at pressures up to 10,000 psi. Pressurization is controlled by air regulator, which regulates amount of air supplied to pump allowing dial-in pressure control. PID controller provides control of fluid temperature in vessel. Modular...

Read More »
Sample Conditioning Modules provide single-point sampling.
Material Conditioners

Sample Conditioning Modules provide single-point sampling.

Series 3100 provides tool for lowering temperature and pressure of single samples in power plants and boiler rooms. Units handle sample conditions up to 5,000 psig at 1,000°F. Sample flows up to 1,500 cc/min and beyond are capable of being cooled to within degrees of cooling water temperature due to high-efficiency coolers. Carbon-steel or optional stainless-steel backplate allows for...

Read More »
Round-Bowl Dryers use dry maize for moisture absorption.
Centrifugal Dryers

Round-Bowl Dryers use dry maize for moisture absorption.

Series OR-CD, available with tub capacities of 3, 5, 10, and 15 cu-ft, offers variable time-cycles by adjusting progression of parts in natural-contour tub. Vertical-shaft vibrator can be easily reached for maintenance. Vibratory dryers utilize 15 hp, 1800 rpm, totally enclosed motor and sound-deadening material that complies with EPA and OSHA standards. Operation is from separate pedestal where...

Read More »
Sleeves, Nuts, and Ferrules can hold 5,000 psi.
Nuts

Sleeves, Nuts, and Ferrules can hold 5,000 psi.

Silica SealTight(TM) sleeves, nuts, and ferrules solve problem of connecting capillary tubing to standard 10-32 coned ports intended for 1/16 in. OD tubing. Teflon® FEP sleeves plus PEEK(TM) NanoTight(TM) nuts, and Tefzel® ferrules provide sealing and can be finger tightened to hold 5,000 psi. Twelve color-coded IDs accommodate capillary ODs from 70 Â-µm to 1 mm.

Read More »
Deduster suits small/mid-sized plastic product manufacturers.
Separators

Deduster suits small/mid-sized plastic product manufacturers.

Model P5 dust contaminant removal system cleans regrind and virgin materials that have been mixed together. Agitator controls material flow, and flux field generator produces low-power electromagnetic field, disrupting electrostatic bond between pellet and dust particles. With capacity of 500 lb/hr, Model P5 removes dust particles down to 100 microns. By separating plastic pellets from dust...

Read More »
Gas Blender mixes shielding gases without electricity.
Blenders

Gas Blender mixes shielding gases without electricity.

AUTOBLEND(TM) Series non-electric blender enables users to create precise custom-blended gas mixtures on site for GTAW (TIG) and GMAW (MIG) industrial welding applications. Eliminating time-consuming cylinder handling, product provides 7 preset, 2-component gas blends and maintains blend accuracy under all flow conditions. Product offers automatic cycling technology and pressure equalization...

Read More »
Repelletizing System converts waste into viable pellets.
Pelletizers

Repelletizing System converts waste into viable pellets.

In-line PAC Repelletizer System enables plastic film processors to capture edge trim and roll scrap, convert it to pellets, and re-introduce it into extrusion process via gravimetric blender. It repelletizes PE, PP, PS, ABS, metallocenes, coextrusion blends, and other commodity and engineering resins in wide range of trim widths and thicknesses at rates of up to 700 lb/hr.

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers