Material Processing

Grinding Mill produces powders as fine as 40 microns.
Material Processing Mills

Grinding Mill produces powders as fine as 40 microns.

Ultra Centrifugal Mill ZM 200 incorporates 3-phase Powerdrive with optimally matched frequency converter. Combined with automatic cover closure and dust protection, product is suited for all standard and heavy-duty grinding operations to reduce dry, medium-hard samples to powders as fine as 40 microns. Additional offerings include speed selection of 6,000-18,000 rpm and ability to set parameters...

Read More »
Abrasive Blast Equipment

Shot Blasting System prepares concrete and steel surfaces.

Self-propelled Blastrac® 1-10DMK3 provides 1-step surface preparation of concrete or steel, removing markings, dirt, and old coatings. It handles concrete removal up to Â-¼ in. and removes paint, rust, and corrosion from steel surfaces. System runs on 230/460 V, 3-phase power and cleans 200-1,000 ft2/hr, depending on application. It includes blast unit with 10 in. cleaning path and...

Read More »
RF Drying System handles temperature-sensitive materials.
Microwave Dryers

RF Drying System handles temperature-sensitive materials.

Macrowave® RF Drying System employs volumetric heating to maintain uniform temperature throughout temperature-sensitive materials and reduce moisture content to levels as low as 200 ppm. Equipped with instant ON/OFF control, conveyorized drying system handles sensitive materials such as filter cake and granular or pelletized materials. Removing water from material at bed depths to 6 in.,...

Read More »
Coating System applies thin films to flat substrates.
Flux

Coating System applies thin films to flat substrates.

Prism(TM) 100 utilizes Ultra-Spray® ultrasonic technology for control of coating quality and thickness. Substrate moves in defined increments while spray head moves transversely to apply coating. System works with liquids from low-viscosity fluxes and solvents to viscous adhesives, conformal coatings, conductive inks, and photo imageable materials. It has 18 x 18 in. spray application area...

Read More »
Plastic Shipping Trays suit automated assembly applications.
Miscellaneous Trays

Plastic Shipping Trays suit automated assembly applications.

Injection molded trays utilize design that accounts for dimensional accuracy, positioning accuracy, durability, secure part containment, and part protection from damage and contamination. Dimensional accuracy is ±.04 anywhere in tray. Molded from Noryl® EM6100, trays measure 43.5 x 23.187 x 3.08 in. and hold up to 75 individual main bearing caps positioned in pockets with spacing...

Read More »
Screen Changers designed to provide continuous operation.
Extruder Screen Changers

Screen Changers designed to provide continuous operation.

Valuline dual-piston screen changers are offered in 4 sizes for up to 8 in. extruders. Seal-less systems feature double filtration area for filtration of polyolefins, styrenes, and other non-technical polymers. They complement complete line of custom discontinuous, continuous, and automatic back flushing systems, which are suitable for demanding extrusion, compounding, and polymer applications.

Read More »
Small-Media Mill requires only 0.9 qt of media volume.
Material Processing Mills

Small-Media Mill requires only 0.9 qt of media volume.

Model QC-150 features QC-Mill(TM) high-circulation design. Rotor creates strong centrifugal and shearing forces inside mill, and combined with fast circulation of slurry, forces result in efficient grinding with narrow particle size distribution. Holding tank has capacity of 3-15 gal. Mill runs to max speed of 2,200 rpm with motor capacity of 7.5 hp. Simple design makes mill easy to clean and...

Read More »
Water Treatment Equipment

Reservoir Management System provides chlorine control.

Using real-time water quality samples from inside reservoir, self-regulating ClorTec(TM) Reservoir Management System (RMS) helps maintain uniform levels of chlorine throughout storage reservoirs. It automatically detects and feeds level of chlorine required to maintain consistent predetermined residual. System, consisting of circulators, analyzers, and PLC controls, operates independent of...

Read More »
Tooling System increases plunging and copy milling capability.
Cutting Tool Inserts

Tooling System increases plunging and copy milling capability.

Minimaster System, for machine diameters from .250 to .750 in, includes replaceable carbide inserts for slotting, square-shoulder milling, drilling, center drilling, chamfering, and copying. Clamping system, where indexable carbide insert is mounted in shank, allows quick and easy changing of inserts. Three-flute ballnose for copy milling provides 5 times metal removal rate of conventional steel...

Read More »
Roll Mills offer fine milling with tightly controlled output.
Material Processing Mills

Roll Mills offer fine milling with tightly controlled output.

SUPREME(TM) Roll Mills, available in carbon or stainless steel, employ dual, counter-rotating serrated or grooved rolls that mill, pinch, and crack solids to output range of 13-150 mesh without degrading qualities of feed material. Carbon steel Model 1010M features serrated 10 x 10 in. rolls, variable roll gap, hopper feed regulator, automatic spring overload relief, output enclosure for dust...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers