Material Processing

Coolers

Cooling System employs adaptive condenser system.

Available in 53, 70, 77, and 105 kW downflow units, Liebert DS system controls temperature, air quality, and humidity in areas such as data centers and computer rooms. It uses digital scroll compressors and Liebert Paradenser(TM), which can be installed using traditional refrigerants and transitioned to green refrigerants with no loss in capacity. Also included, iCOM(TM) control system enables...

Read More »
Miscellaneous Trays

Cable Tray and Support Clamps come in variety of finishes.

Suited for tight installations where access is limited or where cable must be installed close to ceiling or deck, CFL L Wire Cable Tray can be used in conjunction with I-beams or C-beams, allowing beam profile to become part of cable containment pathway. ETC tray beam support clamps attach directly to beam with no need for additional hardware. Available finishes for both include electrozinc, hot...

Read More »
Curing Systems

LED Curing System offers 365 nm curing capability.

Suited for bench top and automated UV curing applications, SpotCure-B6 is available with 2 interchangeable light probes to cure UV adhesives in 365 and 395 nm ranges. In automatic operation mode, light activates ON when probe is removed from holder, and OFF when replaced in holder. Light delay of 1.5 sec allows accurate positioning of 12 mm light probe over work area, while selectable 10 sec...

Read More »
Timing Belts feature .080 pitch.
Belts

Timing Belts feature .080 pitch.

Made of Kevlar-reinforced polyurethane, Series A6B16-D offers positive, non-slip power transmission without vibration, chatter, or backlash. Double-sided tooth action enables belts to wind between pulleys to synchronize shaft rotations. Capable of operating in temperatures from 0-180°F, and intermittently to 248°F, belts are available in widths of 1/8, 3/16, Â-¼, and 3/8 in. with...

Read More »
Belts

Timing Belts provide synchronous control of drives.

Offered in Â-¼, 5/16, and 3/8 in. widths, Series A 6G3, A 6B3, and A 6R3 feature .200 in. pitch and molded teeth on one side for positive power transmission without slip, vibration, or backlash. Small pitch belts can wind around number of small pulleys to permit multifunction operation in synchronizing shaft rotations. With 20-590 grooves and pitch lengths from 4-118 in., belts come in...

Read More »
Spliceable Timing Belt Stock has 60 teeth per foot.
Belts

Spliceable Timing Belt Stock has 60 teeth per foot.

Made of nylon-covered, fiberglass-reinforced neoprene, A 6R3-C timing belt stock can be spliced to suit designs where nonstandard endless belts are not available. It comes in 3 belt widths and operates continuously in temperatures from -30 to +185°F. Produced with 1/5 in. pitch and trapezoidal teeth on one side, product provides positive, non-slip power transmission without vibration, tool...

Read More »
Pumps

Pressure Cup delivers consistent finishing results.

Available in 3 model options to suit non-agitated, rotary agitated, and oscillating agitated applications, 2-quart SG-2 Plus(TM) delivers continuous mixing capabilities. Four-screw lid design facilitates hose attachment, while divorced design of regulator and handle aids in maintenance. Dual-regulation is provided for rotary agitation models, and all models incorporate check valve that prevents...

Read More »
Heat Reflective Products withstand temperatures to 1,200°F.
Cable Protectors

Heat Reflective Products withstand temperatures to 1,200°F.

Designed for moderate to severe temperature heat barrier applications, Heat Reflective Products combine aluminized fiberglass or aluminized silicone jacketing used in conjunction with pressure-sensitive adhesive closure system, stainless steel snaps, high-temperature hook and loop, or Teflon® closure system. Available in sizes from 3.8 in. dia, products provide protection for both flat and...

Read More »
Aligners

Alignment Kit helps check and align large machine tools.

Able to measure machinery rail straightness, parallelism, surface flatness, and other alignments, Microgage Universal Alignment Kit includes laser transmitter and digital receiver connected to handheld display. Readings appear on LCD, and alignment units are presented in 0.001 or 0.0001 in. increments or in millimeters. Other components include rotating base, 90° beam bender, and heavy-duty...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics