Machinery & Machining Tools

Ersa Will Show the New SMARTFLOW 2020 and HOTFLOW Systems

Ersa Will Show the New SMARTFLOW 2020 and HOTFLOW Systems

Plymouth, WIÂ- – Kurtz Ersa North America, a leading supplier of electronics production equipment, will exhibit in Booth #2601 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. For the first time, Ersa will display the new Smartflow 2020 selective soldering system and HOTFLOW 3/20 third generation reflow oven. The Smartflow 2020...

Read More »
Magnetic Spray Gun Holder helps organize paint booths.

Magnetic Spray Gun Holder helps organize paint booths.

Designed to keep spray guns orderly and close at hand, Spray Gun Holder features forked arm that is capable of holding spray guns in variety of orientations.Â- Strong neodymium magnet allowsÂ- holder to attach to any steel surface, even through multiple layers of paint buildup. Measuring 4.9 in. in diameter, holder projects out 5.5 in. and offers weight capacity up to 95 lb.Â-

Read More »
CAM Software offers rib-machining module.

CAM Software offers rib-machining module.

Available for PowerMILL CAM system used for high-speed and 5-axis machining, Rib-Machining Module enables users to program machining of cavities for narrow ribs, even when cutter's length is much greater than its diameter. First stage of process is to create pattern for single rib by sketching line along its length. PowerMILL uses this line to automatically identify all surfaces needed to form...

Read More »
ELGE Precision Machining, Inc. Adds a New 5-Axis CNC Turning Center Lathe to Increase our CNC Machining Capacities

ELGE Precision Machining, Inc. Adds a New 5-Axis CNC Turning Center Lathe to Increase our CNC Machining Capacities

Elge Precision Machining, Inc. in Reading, PA, is excited to announce its new Miyano BNA-42s 5-axis super turning center with live tooling.Â-  We also included an auto loader bar feed system.Â-  This gives us a tremendous increase in capacity to service our existing and new customers. Miyano has been a pioneer in the development of automatic lathes, continually achieving advances in...

Read More »
Juki to Run Three SMT Lines at the IPC APEX EXPO

Juki to Run Three SMT Lines at the IPC APEX EXPO

High-Speed, High-Mix and LED / Odd-Form Lines Will be Displayed MORRISVILLE, NC — Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and part of Juki Automation Systems Corporation, will exhibit in Booth #918 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. Juki will display...

Read More »
High-Volume Manufacturing or Lean Production Concept: SEHO Provides the Right Selective Soldering Solution at APEX

High-Volume Manufacturing or Lean Production Concept: SEHO Provides the Right Selective Soldering Solution at APEX

SEHO North America, Inc., a worldwide leading supplier of complete solutions for soldering processes and automated production lines, will showcase the new SEHO SelectLine and SEHO SmartSelect selective soldering systems in booth #3533 at the 2015 IPC APEX EXPO, scheduled to take place Feb. 24–26, 2015 at the San Diego Convention Center. High Volume Production The patented Synchro concept,...

Read More »
Davis-Standard's MEDD Extruder at MD&M West

Davis-Standard's MEDD Extruder at MD&M West

(Pawcatuck, Conn.)Â- - The tight tolerance tubing capabilities of Davis-Standard’s MEDD extruder will be on display at MDM West in Anaheim, February 10, booth 1375. The MEDD (Medical Extruder Direct Drive) is Davis-Standard’s signature extruder for medical tubing with direct drive technology for more energy efficient operation. In addition to the direct drive advantages, the MEDD provides...

Read More »
Cutting Tool Collets accommodate short and long tools.

Cutting Tool Collets accommodate short and long tools.

For shorter carbideÂ- cutting tools, powRgripÂ-® PG-S Collets have 3–6 mm shorter engagement that standard PG collets and are available in PG 6, 10, 15, 25, and 32 sizes. powRgrip PG-L Collets, accommodating longer tools by providing 3–6 mm longer engagement than standard collets, are available in PG 15, 25, and 32 sizes. powRgrip system utilizes shallow-tapered collet that is pressed...

Read More »
Robotic Tool Changer handles payloads up to 600 lb.

Robotic Tool Changer handles payloads up to 600 lb.

Featuring internal Lock/Unlock sensing, Model QC-160 mounts directly to most 200 kg robots, optimizing robot's ability to switch end-effectors automatically. Unit features five 3/8 NPT and four Â-½ NPT pass-through air connections as well as eight 3 A/50 Vac electrical connections.Â- Positional repeatability (X, Y, and Z) tested at rated load at one million cycles is 0.0006 in. For...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics