Machinery & Machining Tools

New Tools for Laser Beam Characterization

Electro Optical Components will launch new products for laser beam characterization at Photonics West 2015 in San Francisco (7-12 Feb.). Photonics West, organized by SPIE, is the leading fair in optics and photonics with 1,250 exhibiting companies and 20,000 attendees. EOC will present the gSKINÂ-® Laser Power Sensor portfolio and two new product classes for laser beam characterization: Laser...

Read More »
Low-Noise Single Coil Fan Driver IC has built-in current limiting.

Low-Noise Single Coil Fan Driver IC has built-in current limiting.

Promoting energy efficient cooling system designs, 600 mA MLX90297 integrates Hall Effect sensor with 2 half bridge output stages. In addition to minimum speed setting, speed curve can be tuned via inclusion of one extra resistor. Soft start and soft switching mechanisms achieve optimal acoustic noise levels, as well as minimal vibration at higher speeds, without sacrificing max motor torque, and...

Read More »
Component Feeding System handles small and SMT parts.

Component Feeding System handles small and SMT parts.

With 134 x 152 mm footprint that maximizes lane capacity, StripFeeder System Mini loads short (2–4 in.) strips of tape-and-reel components onto compact modules for prototyping and high-mix, low-volume applications. Removable rails can be mounted to accommodateÂ- array of tape sizes in same feeder, and design holds components securely in machined tracks to prevent parts from being...

Read More »
EVS to Debut the New Green EVS 500LF at the IPC APEX EXPO

EVS to Debut the New Green EVS 500LF at the IPC APEX EXPO

EVS International, the leader in solder recovery, will debut the new EVS 500LF lead-free version in Booth #3521 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. With the new EVS 500LF, EVS has managed to drastically reduce the size, weight, complication and footprint, while creating a greener lead-free system. EVS has continually...

Read More »
Metcal to Introduce New Rework Tools at MD&M West

Metcal to Introduce New Rework Tools at MD&M West

GARDEN GROVE, CAÂ- – Metcal today announced plans to exhibit in Booth #524 at MDM West, scheduled to take place Feb. 10-12, 2015 at the Anaheim Convention Center in California. The award-winning Scorpion Rework System will be on display, along with the new Solder Ball Replacement Kit and MX-HPDC dual cartridge hand-piece. Metcal's Scorpion Rework System with Automatic Placement Package...

Read More »
New Company, Normal, Uses Stratasys 3D Printing Technology to Mass Produce Custom Earphones

New Company, Normal, Uses Stratasys 3D Printing Technology to Mass Produce Custom Earphones

Normal is one of the first companies to use additive manufacturing for large-scale customization, allowing customized earphones in as little as 48 hours Minneapolis Rehovot, Israel – Stratasys Ltd. (Nasdaq:SSYS), a leading global provider of 3D printing and additive manufacturing solutions, announced that custom earphone maker Normal is using Stratasys 3D Printers for mass customization of a...

Read More »
Fancort Industries to Display Floor Mounted Routers at APEX

Fancort Industries to Display Floor Mounted Routers at APEX

MERIDIAN, IDAHOÂ- – Fancort Industries, Inc., a global supplier of cost-effective solutions to electronics manufacturers, will exhibit in Booth #3424 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. Company representatives will showcase the new series of floor mounted routers. Three models are available (SM3320S-S Single Table,...

Read More »
Hybrid Trunnions eliminate need to remove trunnion table.

Hybrid Trunnions eliminate need to remove trunnion table.

Engineered to bolt on to any machine’s rotary indexer, Stallion Hybrid Trunnions allowÂ- 3- and 4-jaw chucks, collet chucks, and faceplates to be installed without removal of trunnion table. Stallion Hybrid 9/20 (9 x 20 in.) is designed to hold 6 in. vise, while 9/23 (9 x 23 in.) is intended for double or single station 6 in. vises.Â- Pneumatic brake, built into outboard support,...

Read More »
Assembly Line for GEA Separators

Assembly Line for GEA Separators

The GEA Westfalia Separator Group has launched a one-piece-flow assembly line at its headquarters in Oelde, Germany. The facility is based on RoundTrack technology from STROTHMANN Machines Handling. Separators are placed on carts for final assembly. Thus, they can be easily moved from station to station. The RoundTrack rails are manufactured from hardened, polished steel. The accompanying cart...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics