New Machinery & Machining Tools Products

Thermal Die Cutting System suits screenprint and sign shops.

OmniPress can emboss, deboss, and foil stamp variety of materials including vinyl, plastics, and foils. It can process 16 x 20 in. sheets and has cutting capacity of 15 x 19 in. OmniPress fits on small tables, uses thermal dies, and can plug into any 110 V outlet. Flip-top platen permits easy die changes and heat blanket system allows precise temperature control.

Machining Center offers max spindle speed of 12,000 rpm.

Vertical Center (VC) Nexus 510C features high-speed rapid traverse rate of 1417 ipm at 0.5 G acceleration and 2.9 sec chip-to-chip time. Spindle is driven by 25 hp motor. Machining area provides X-axis travel of 41.3 in., Y-axis range of 20 in., and Z-axis travel of 20 in. Table size is 51.18 x 21.65 in. with load capacity of 2640 lb. Tool magazine stores up to 30 tools of 40 taper. Tool-to-tool...

Collet Chucks expedite machine time.

STUBBY ER straight shank collet chucks are available in ten models from SPH-ER11-0500, which fits ER11 collet and has 1/2 in. shank dia and 3 Ã-½ in. overall length, to SPH-ER32-1500, which fits ER32 collet and has 1 Ã-½ in. shank dia and 6.20 in. overall length. Collet chucks are also offered to fit ER16, ER20, ER25, and ER32 collets with shank diameters of 5/8, Ã-¾, 1, and 1 Ã-¼...

Multi-Axis Stage has advanced positioning technology (APT).

Model 17 APT 600 open-ended positioning system consists of one 6-axis stage that uses guided alignment linkage pin (GALPin(TM)) for multi-axis positioning. Stage uses modular, interchangeable manual differential or stepper-motor actuators on all axes. Axes may be equipped with internal piezoelectric actuators to provide linear resolutions of 1 nm and angular resolution of 0.1 arc sec. Control...

Confused About Which Screw Drive Style to Choose? Don't Lose Your Head!

This white paper outlines the different types of screw head and drive designs.

Workholding Systems provide repeatable part clamping.

SeraLock Towers, Pallets, and WedgeLock self-aligning workholding modules allow machining of like and unlike workpieces all in same setup. System employs reusable clamping components that can be mixed and matched to hold any size part. Towers and pallets have V shaped serrated surfaces for alignment of WedgeLock clamping modules. Towers are available in 4-, 2-, and single-sided units, with base...

Hinge Tooling forms knuckles using two tools in three hits.

Hinge Tooling creates hinge knuckles on fabricated metal enclosures and similar products with CNC punch press precision. Product is designed with 1-piece upper tool and lower assembly that allows tool to bottom out. Tool design produces cleanly contoured knuckle forms without stress to tool components. Hinges can be formed in mild steel, aluminum, and stainless steel in thicknesses from...

Collet Holder has straight shank double angle feature.

TS300-0625 collet holder utilizes DA300 collet and offers 5/8 in. dia shank, length of 3.75 in., and chuck capacity of 1/64 to 1/4 in. Straight shank collet chucks are made from high grade heat-treated alloy steel and come with lock nut and inside backup screw. Tools are for use on manual or CNC chuckers, screw machines, and CNC lathes.

Reciprocating Saw has gear protecting clutch.

Rated at 10 A, Sawzall reciprocating saw has gear protecting clutch that offers maximum protection from impacts. Tool offers 0-2,800 SPM variable speed trigger, 1 1/8 in. blade stroke length, and Quik-Lok(TM) blade clamp for tool-less blade changes. Product is constructed with double bearing wobble plate mechanism and uses standard -½ in. shank Sawzall recip saw blades. Additional offerings...

CNC Grinder can operate manually.

Model EJ29 Silver multi-functional OD/ID grinder has between centers clamping length of 31 in. and can accommodate cylindrical parts ranging from one piece to large lots. Separate electronic handwheels are supplied to manually move X and Y axes. For CNC operation, Fanuc system includes dedicated graphics-based software for pendulum, plunge-cut, shoulder, and internal grinding. Manual or automatic...

Pliers and Cutters suit electrostatic-sensitive areas.

ESD Safe Pliers and Cutters are offered in 26 styles, drop-forged from tool steel. Units offer static-dissipative handles, welded double leaf spring, box joint, and 2-component handle with non-slip soft grip surface. Precisely aligned cutting edges are induction hardened to ~64 HRC. Cutter head types include slim and wide tapered and oval. Plier nose styles include short and regular snip, long...

SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents

Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.