Electronic Components & Devices

S-Band VCO deliver low phase noise performance.

S-Band VCO deliver low phase noise performance.

Supplied in MINI 0.50 x 0.50 x 0.13 in. package, V804ME17-LF is Pb-free, RoHS-compliant, S-Band (2,280-2,450 MHz) Voltage Controlled Oscillator suited for fixed wireless applications. Solution offers low phase noise performance of -95 dBc/Hz @ 10 kHz offset (typ), average tuning sensitivity of 98 MHz/V, and harmonic suppression of -20 dBc (typ) over -40 to +85Â-ºC range. Drawing 20 mA (typ),...

Read More »
S-Band VCO offers low phase noise performance.

S-Band VCO offers low phase noise performance.

Supplied in MINI 0.50 x 0.50 x 0.13 in. package, V600ME20-LF is Pb-free, RoHS-compliant Voltage Controlled Oscillator in S-Band (1,700-2,800 MHz) suited for Broadband Transmission applications. It offers low phase noise performance of -96 dBc/Hz @ 10 kHz offset, average tuning sensitivity of 113 MHz/V, and typical harmonic suppression of -20 dBc over -40 to +85Â-

Read More »
L-Band Coaxial Resonator Oscillators offer low phase noise.

L-Band Coaxial Resonator Oscillators offer low phase noise.

Supplied in 0.50 x 0.50 x 0.22 in. MINI package, CRO1520B-LF (1,520 MHz), CRO1740C-LF (1,740 MHz), CRO1800A-LF (1,800 MHz), CRO1860A-LF (1,860 MHz), and CRO1920B-LF (1,920 MHz) are all Pb-free, RoHS-compliant, single-frequency coaxial resonator oscillators. They offer average low phase noise performance of -118 dBc/Hz @ 10 kHz offset and linear tuning sensitivity of 5 MHz/V. Each VCO covers band...

Read More »
Signal Connectors meet high-reliability application needs.

Signal Connectors meet high-reliability application needs.

Nano-Miniature Bi-LobeÂ-® connectors, available in single- and dual-row formats, have 0.025 in. pitch and are certified on QPL for MIL-DTL 32139. Polarized to prevent mis-mating, single-row devices come in 5-51 pin count versions, have 0.115 in. profile, and feature metal shell and jackscrew for locking and un-mating. Dual-row devices, offering pin counts from 15-65 positions, have 1 A...

Read More »

HDMI Chip targets portable and cellular devices.

Based on 65 nm technology, ChipideaÂ-® HDMI Transmit IP supports data rates of 1.65 Gbps per TDMS channel and video resolutions up to 1,080p at 60 Hz, while HDMI Receive IP integrates options to support data rates up to 10.2 Gbps and video resolutions to 1,080 p at 120 Hz, 1,440 p, and beyond. Integrated DMA eliminates need for separate audio and/or video interface, allowing autonomous access...

Read More »
Cartridges filter particles as fine as 1 micron.

Cartridges filter particles as fine as 1 micron.

Spun from 100% pure polypropylene fibers, graded density SchroederSPUN(TM) Cartridges and Housings work by trapping larger-sized particles on outside of element while harboring smaller particles closer to element's core. Features include V-band closure on top of stainless steel housing, which facilitates installation and element change. Two versions, stainless steel and NSF standard 42 listed...

Read More »
Type C Headers feature pin-in-paste termination..

Type C Headers feature pin-in-paste termination..

The 2 mm MillipacsÂ-® family consists of 5-row and 8-row versions suitable for solder-to-board, pin-in-paste applications. To incorporate into board assembly process, design features reflow temperature resistant resin, is packaged in tape, has pick-up cap for automatic pick-and-place by vacuum nozzle, and meets all requirements of IEC 61076-4-101.

Read More »

Memory Module Cooler uses integrated heat pipe.

Available in black, blue, and plain aluminum, HXR-5500 features aluminum extrusion heatsink with integrated 5 mm dia heat pipe used to cool memory modules. Heat pipe transports heat from memory module onto detached aluminum heat sink on top of module. By using this product, memory module temperature can be reduced by 13 to 14Â-

Read More »

Motorola Announces Family of Femtocell Solutions

HORSHAM, Pa., Feb. 7 -- Motorola, Inc. (NYSE:MOT) today unveiled its first 3G femtocell customer premises equipment (CPE), the first two units from a portfolio of CPEs that will be commercially available in the second half of 2008, as part of the company's end-to-end femtocell solution. The femtocell CPEs that will be showcased at Motorola's booth (#8A159) at Mobile World Congress 2008 include: o...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics