Electrical Equipment & Systems

Switches

Ultrasonic Sensor remotely warns of low power conditions.

With fail-safe circuit that engages when input power drops below 3 Vdc, U004E Ultrasonic Gap Switch anticipates power loss to level sensing devices to aid monitoring of oil fields spanning miles of remote regions. Switch is customized to end-user's desired output in NO or NC states. When power supply drops, unit can open valve, turn on pump, or send alarm to alert technicians. Other features...

Read More »
Li-Ion Battery Charger IC can achieve 80% capacity in 30 min.
Battery Chargers

Li-Ion Battery Charger IC can achieve 80% capacity in 30 min.

Combining narrow-voltage DC/DC power path management with TI's MaxCharge technology, Model bq25892 supports input voltages up to 14 V while delivering charge current up to 5 A. Switch-mode charger provides up to 91% efficiency at 9 Vin 3.5 A with only 18°C temperature rise. Housed in 4 x 4 mm, 24-pin QFN package, I2C-controlled device offers peak 9 A supplement current for instant...

Read More »
Watertight Connectors utilize Push-Pull technology.
Electrical Connectors

Watertight Connectors utilize Push-Pull technology.

Available in 2- to 32-contact configurations, T Series features special construction with inner sleeve and extra sealing to enable IP68 water protection. Contacts can be terminated by soldering to wire, crimping onto wire, or directly to PCB.Â- Offering full EMI shielding, connector outershell is available in black-chrome finish or plated brass, making connectors suited for defense systems...

Read More »
Electrical Power Generators

Electric Vehicle Range-Extender promotes quiet, clean ride.

Used within Wrightspeed's range-extended architecture, Fulcrum 80 kW turbine generator recharges battery system only when needed and does not provide direct propulsion to drive wheels. Recuperation design and 2-stage compression process optimize efficiency and power, while multi-fuel capabilities allow this 250 lb unit, which carries 10,000 hr lifetime rating,Â- to burn diesel, CNG, LNG,...

Read More »
Medical Power Adapters offer dual and triple outputs.
Power Supplies

Medical Power Adapters offer dual and triple outputs.

Comprising 55–80 W dual and triple output models, TSM100 Series meets 2 MOPP and is furnished with IEC 320/C14 AC inlet plus optional power switch. Series also includes 70–100 W single output models with voltage factory preset from 5–40 V. Standard single output models come with 4-pin power DIN output connector, while dual and triple output models have 5-pin or 8-pin DIN plug. Accepting...

Read More »
AC/DC 150 W Power Supplies serve BF rated medical applications.
Power Supplies

AC/DC 150 W Power Supplies serve BF rated medical applications.

Supplied in 2 x 4 x 1.3 in. open-frame package, single-output PMAM115 Series delivers 115 W continuous power with 7 cfm forced air cooling. Universal input is 85–264 Vac; available output voltages are 12, 24, or 48 Vdc; and efficiencies reach up to >91%. Design meets 2x MOPP and EN/UL 60601-1 3rd edition safety standards, and products are intended for direct patient contact (BF rated) medical...

Read More »
Configurable Power Supply combines high efficiency, power density.
Power Supplies

Configurable Power Supply combines high efficiency, power density.

Targeting equipment with multiple power input requirements, Â-µMP16 provides 1,800 W max output, 22.9 W/in.³ power density, and up to 91% efficiency. Users can configure 6 slots from adjustable power modules ranging from 0.9–60 V, enabling diverse configurations across up to 12 outputs. With modules connected in series, power supply achieves outputs up to 360 Vdc. Along with...

Read More »
Industrial e.MMC Memory upgrades speed and performance.
Circuits

Industrial e.MMC Memory upgrades speed and performance.

Comprised of NAND Flash and Flash Memory Controller in 153-ball BGA package, MLC-based EMC210 e.MMC (embedded Multi-Media Card) offers respective read and write speeds up to 140 and 60 Mbps. Flexibility is fostered via 1.65–1.95 V and 2.7–3.6 V interface voltage options. In addition to Enhanced Reliable Write, which ensures data remains intact in case of sudden power loss during write...

Read More »
Micro USB Plug is designed for vertical PCB mounting.
Electrical Connectors

Micro USB Plug is designed for vertical PCB mounting.

With 7.13 mm height above PCB, 7.35 x 2.80 mm USB3150 suits cradle mounting applications normally used to charge handheld devices — from cell phones to rugged PCs. PCB plug is thru hole with 5 contacts, and additional strength on PCB is promoted by 6 metal shell stakes and 2 plastic locating pegs. Two shell stake and lead length options are offered at 0.75 and 1.30 mm, and product meets USB 2.0...

Read More »
ETL Systems to Exhibit New RF over Fibre Standalone Modules at IMS 2015
Mounts

ETL Systems to Exhibit New RF over Fibre Standalone Modules at IMS 2015

New outdoor unit amplifiers and Ku-band passive splitter/combiners will also feature at expo in Phoenix, Arizona ETL Systems, a global designer and manufacturer of RF distribution equipment for satellite communications, will showcase three new products from its components range at this year’s International Microwave Symposium. The new StingRay RF over Fibre standalone module – a compact unit...

Read More »
Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications
Sponsored

Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications

As a globally recognized provider of full-service packaging products and services, we have a history of developing innovative solutions that promote enhanced efficiency in a wide range of packing applications. Our new AIRSHIELD™ product is just another example of how we are helping food and beverage manufacturers to extend the life of their products. To learn more about this cutting-edge product, see our video.

Read More »

All Topics