New Electrical Equipment & Systems Products

Enclosures comply with MS25212 mounting standard.

ZS Series enables PC/104 and EBX computer applications to conform with military/aviation mounting standard MS25212. Units integrate Dzus-® Fastener Quarter-Turn studs to enable rail/rack mounting within 5.0 in. width rack. Enclosures are offered in heights of 5.3 or 6.6 in. and lengths of 6.0, 8.0, or 10.0 in. PC/104 modules can be packaged inside extrusion using PC/104 Railed Card Cage. Boards...

Snap-Action Rotary Switch withstands vibration and shock.

Snap-Action Switch line offers double-wiping, low-resistance contacts that hold their positions inside fully enclosed decks. Suited for dc and ac switching, models carry continuous ratings from 20 to 200 A at 600 V, and are available with up to 4 positions and 12 poles. Snap-action design provides approximately 10 msec transfer time. Non-shorting contacts are standard.

Indicator Nameplates display status on switch or relay.

Smart Lighted Nameplates incorporate up to 3 indicator LEDs and one output contact into traditional nameplate footprint. Front-replaceable indicator LEDs are available in 5 colors. Nameplates provide means to monitor and display status of events, trigger annunciation, and activate devices. They are available on company's Series 24 Lock-Out relays and breaker control switches, and Series 24 and...

Power Switcher provides wide-range adjustability.

Model LPQ142, with active power-factor correction, offers user adjustability on 3 of its 4 output voltages, one with range of Ã-

Heated Deck Panels

Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms

Coaxial Cable is highly flexible.

Micro-Coaxial (MCX(TM)), for Ultrasound medical assemblies, laptop computers, high-end workstations, automated test equipment, and other applications, is available in 48-36 AWG range. It routes as individual cable, in bunched composite cable, or in flat ribbon MCX RibbonX cable, and has low line-to-line skew, low EMI, and virtually no cross-talk. PFA insulation and PET jacket allows for easier...

Miniature Connector comes in 4-pole version.

Screw-clamp, pluggable revos Series is rated for 250 V, 10 A for wire sizes 22-12 AWG. First-make, last-break grounding safety feature protects from potential shock under load during unintentional disconnection. Hoods and housings are equipped with strain-relief clamps and protected to IP54 standards or IP65 with appropriate cable glands. Miniature hoods and housings are available in plastic and...

Electronic Pressure Switch uses thin film pressure sensor.

Series ES can be used with liquids and gases compatible with 17-4 PH stainless steel wetted parts and 316 stainless steel pressure connections. Narrow deadbands can be adjusted to less than 0.5% of range. Status light indicates process pressure, setpoint, reset, and relay output status. Temperature range is -20 to 160Ã-

Pushbutton Switches suitable for 1/4 in. panel mounting.

Series 9000 miniature switches have 3/8 in. dia body with Ã-¼-40 threaded bushing and .157 in. dia black glass-filled polyamide actuator. Models are single pole with normally closed, normally open, or normally open/normally closed electrical functions. They offer solder lug or printed circuit terminals. Switches are suitable for applications where low power ratings up to 0.6 A 125 Vac, 0.3 A...

Power Supply provides active power-factor correction.

Enclosed Series SP provides output power from 75 to 500 W. All models accept universal input from 85 to 265 Vac and 50 models provide single outputs from 3.3 to 48 Vdc. Switching power supply has soft-start circuitry, EMI filtering, power-good LED indicator, and output-adjustment potentiometer. It operates over ambient temperature of -10 to +50Ã-

DC-DC Converter extends battery life in portable applications.

Inductorless, 100 mA FAN5660 converter achieves over 90% efficiency at full load with typical operating current of 120 Ã-µA. It inverts +l.5 V to +5.5 V input to corresponding -l.5 V to -5.5 V output. Unit can also split or double full load, +5.0V input voltage, of power supply or battery, providing +2.25 V in splitter mode and +9.5 V in doubler mode. Equipped with onboard oscillator circuit,...

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.