New Electrical Equipment & Systems Products

Connector suits board-to-panel feed-through applications.

Model RFS-2030 is constructed of nickel plated machined brass with Teflon insulation and silver plated phosphor bronze contact. Bulkhead seal is inset GR70 nitrile O-ring. Connector is mounted using 4 posts with standoffs spaced .400 in. on center. Featuring voltage rating of 1,500 V peak and insulation resistance of 5 K milliohms max, RFS-2030 is designed for applications with frequency range of...

Relay combines 3 units in one package.

Solid-state Series SG-24F includes 3 models, switching 10 through 25 A at up to 440 Vrms with dc inputs, and either zero-cross or random turn-on with up to 800 V blocking. LED indicator and built-in snubbers are included. Series uses photo-isolation for high input-to-output isolation of 4000 Vrms.

Feeder System eliminates tray replenishment time.

Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine's TAKT time.

Electrical Terminals for use in automated crimping to wire.

Standard Electrical Terminals consist of over 1,500 connector products including rings, spades, disconnects, pins, receptacles, and splices. Sizes range from .008 to .080 in. thick. Units meet UL 310, NEMA standards, and QS9000 requirements. They are offered in brass, tinned brass, nickel plated steel, copper plated steel, tinned steel bearing bronze, phosphor bronze, and beryllium copper....

The Ultimate Guide to Packaging Automation Solutions

This ebook provides an in-depth guide to packaging automation solutions.

Integrated Circuit provides precise signal timing.

Model iTH10-4005, a 12.5 Gb/s D flip-flop integrated circuit, is designed for applications that require precise timing of digital signals. It is suitable for test and measurement applications operating at OC-192 and OC-768, in addition to OC-192 and OC-768 SONET long haul and ultra long haul optical transport systems.

Stepper Motors have integral fail-safe brakes.

Brakes, coupled to 5-Phase AM Stepper motors, stop heavy loads rapidly and hold them stationary in case of power failure. Holding torque ranges from 41.66 to 138.87 oz-in. Brakes are part of NEMA-size 23 or metric-size 34 package, with dielectric strength sufficient to withstand 0.5 kV at 50 Hz, insulation resistance of 100 Mohms or better, with 500 V potential applied between motor windings and...

Backplane provides differential pair architecture.

VHDM-HSD(TM) 5-row backplane supplies up to 5.0 Gbps bandwidth per signal pair. Ground planes between signal columns provide tightly controlled impedance for rise times down to 50 psec, ensuring low cross talk between signals within and between columns. It connects main backplane to accessory daughtercards in high speed, short rise time, high circuit count environments such as routers, switches,...

Inverter provides multi-process welding power source.

ALT(TM) 304 CC/CV inverter, with Auto-Line(TM) input power management, eliminates need for power linking mechanisms and allows unit to plug into 208 V through 575 V primary power without adjustments. Unit is suitable for Lift-Arc(TM) DC TIG, all Stick electrodes, MIG and flux-cored welding. It can also carbon arc gouge with 3/16 in. dia carbons. Using solid wire and 75/25 argon/CO2 shielding gas,...

Connector accommodates high-volume manufacturing.

HTS HD Series modular connector system is comprised of rectangular outer shell made from die cast zinc or aluminum, inner contact housing, and Multimate contacts, which employ pin and socket design that is either stamped and formed or screw-machined. Contacts accept 30 to 14 AWG stranded wire. Connector accommodates 7 to 128 contacts and is rated for 250 Vac at 10 A per contact. Applications...

Connector suits audio and video multimedia applications.

Combination Connector consists of 3 RCA phono jacks in red, white, and yellow color combination and 1 S-video connector in black. Main housing and colored washers are made from ABS thermoplastic, and contacts are made from brass and steel. Connector is available in PCB mount, and in vertical and horizontal configurations.

Aerzen USA Process Gas Blower and Compressor Installations Worldwide

Aerzen is firmly established as a global leader in compressed air, gas, and vacuum solutions. Our reputation as an industry leader is built on consistently delivering innovative products that are at the cutting edge of technology. To learn about the industries finest blowers and oil-free and oil-injected screw compressors, see our video.