New Electrical Equipment & Systems Products

Copper Connector suits high-speed switching applications.

Copper microGiGaCN(TM) Connector includes vertical board-mount I/O socket. Optimized for differential signal transmission of 3.125 Gbps and above over standard FR-4 material, FCN-260D socket is available in 4x and 12x versions with latches for InfiniBand applications. Supporting pcb thicknesses from 0.062-0.110 in., socket has 0.75 mm signal-to-ground contact pitch, 1.5 mm signal-to-signal...

Hydraulic Power Units can be customized to fit needs.

FPI(TM) POWERPAK(TM) Vertical Hydraulic Power Units include motor/pump, reservoir, and fluid conditioning accessories. Varying reservoir size, pump size, and motor allows for flexibility. Valves can be added to suit individual applications and functions.

Power Supply suits mission-critical applications.

Elcon consists of 15 A, 24 Vdc system with modular design that provides N+1 redundancy for uninterrupted system power. It features hot swapping capability and LED and alarm outputs for audio-visual status indication and diagnostic evaluation. Unit plugs directly into 3- or 6-position chassis for max capacity of 45 or 90 A, respectively. Adjustable from 22.5-28 V, supply has automatic load-sharing...

Modular Enclosures feature Type 4 and 4X protection.

Series TS8 enclosures incorporate 4-point latching system and are suited for control equipment, drives, 19 in. rack components, and PLCs. Units include side walls as well as mounting panels to attach internal components. Four sizes are available with heights ranging from 71-78 in., widths from 24-32 in., and depths of 24 in. Powder-coated Type 4 design meets UL standard 1332, and Type 4X is...

Hot Forging Process

Check out this white paper to learn about the benefits of hot forging.

Multiprocess Inverter utilizes Auto-Line(TM) technology.

Weighing 80 lb, XMTÃ-® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Line(TM) primary power management technology, 5-425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance...

Triple Output Power Supply powers 2-5 in. TFT LCD panels.

With input voltage range of 1.5-4.6 V, LTC3450 power converter is comprised of synchronous boost converter and 3 charge pumps in 3 x 3 x 0.75 mm QFN package. Synchronous rectification enables product to attain efficiencies above 90%, and controlled power-up sequence insures that AVDD output comes up first, followed by AGL and then AGH. In shutdown, all outputs are disconnected and actively...

Electric Motors are rated for washdown duty.

DirtyDutyWDÃ-® motors feature surface coating bonded to steel frame, cast iron endplates, conduit box, lid, and base, as well as FDA-approved surface coating that provides additional protection against washdown applications. Rated from Ã-½-10 hp, motors operate at speeds to 1,750 rpm and employ stainless steel shaft extension. Non-contact, non-metallic rotating labyrinth shaft seal...

DC/DC Converters have 0.9 x 2.3 in. footprint.

Based on open-frame, single-board package, 25/20 A isolated eighth-brick dc/dc converters use full wave coupled inductor topology. They feature processor-based primary- and secondary-side control techniques, combined with precision timing of synchronous rectifiers. Protected against input voltage transients up to 100 V for 100 ms, modules accept input voltage from 36-75 Vdc and offer choice of...

Sealed Connector System has pre-assembled design.

Able to withstand harsh conditions, MX150(TM) submersible, environmentally sealed interconnection system includes mat and interfacial seals, housing, and terminal position assurance (TPM). Unit requires users to insert crimped terminal lead and seat TPA into final lock position. Field repairable system has plug and receptacle housings with polarization features and accepts 22-14 AWG UL and SAE...

Reed Switch features max glass length of 15 mm.

Series RI-90 Changeover Dry Reed Switch is an SPDT type unit with common, NO, and NC contacts. Ruthenium contact layers provide long-life switching at wide variety of loads. Maximum switching current is 400 mA with 125 Vac or 175 Vdc switching voltage. With initial contact resistance of 140 milliohms, switch is suited for applications in automatic test equipment, security, industrial, and...

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.