New Electrical Equipment & Systems Products

Hot Swap Controller provides open circuit detection.

Able to handle positive voltages from 10.8-80 V, LT4256 IC allows boards to be inserted into live backplanes without risking damage to connectors or causing glitches in supplies. Unit has adjustable analog foldback current limit and is available in 3 versions with latch off, automatic restart, or both. Model LT4256-3 also provides open circuit detect output. Features include under- and...

High Output Batteries feature cold cranking amp capability.

Premium High Output Batteries are maintenance-free with calcium lead alloy technology on both positive and negative plates. Plates are secured to container bottom and locked at top of cell for vibration resistance. Flat top design eliminates lost or leaking vent caps. Rated at 0-°F, BCI Group size 4D has 1,400 CCA rating and 8D has 1,500 CCA rating. Batteries are suited for construction/mining...

Driver-MOSFET Integrated SiP achieves 87% max efficiency.

Housed in QFN 56-pin package, R2J20601NP Driver-MOSFET Integrated SiP (system in package) integrates driver IC and 2 power MOSFETs with high- and low-side functions. It achieves efficiency of 87% max at 1 MHz operation and is suitable for voltage regulators that manage switching operation of CPUs used in PCs and servers. Conforming to DrMOS specification, product measures 8 x 8 x 0.8 mm, allowing...

Bus Termination Controller regulates down to 0.4 V.

Model LTC3831-1 synchronous, switching DC/DC controller guarantees output voltage regulation of 0.75 V or lower for systems needing active bus termination. Unit generates termination voltage with Ã-

Process Piping: Everything You Need & Should Know

Learn how process piping differs from other systems, key considerations, and how it's applied in different systems.

PCB Terminal Block Headers are SMT compatible.

Series MCD 0.5...-HT is available with 2.5 mm pin spacing, while Series MCD 1.5...-THT has 3.81 mm pin spacing. Low-profile Series MCDN 1.5...-THT consists of high-density headers on 3.5 mm spacing. Each series of double-level, high-temperature headers is available in horizontal or vertical configurations with screw flanges or plastic locking latches as options. Terminal blocks allow parts to be...

Battery Charger has adjustable charge current termination.

Housed in 3 x 3 x 0.75 mm DFN package, LTC4068 standalone, linear, single-cell Li-Ion Lithium Polymer battery charger allows users to program charge cycle termination with system load concurrently applied to battery. Via one resistor, charge termination current can be accurately set to value of less than, more than, or equal to C/10. Thermal regulation scheme maximizes charger rate without risk...

Signal Conditioners and Electronics support TEDS Sensors.

Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICPÃ-® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows...

Power Units offer plug-and-play functionality.

NEF Power Units provide ready-to-use packages with base engine, cooling package, and air filter specified for stationary or mobile applications. Optional components include puller or pusher fans, balancers, air and fuel heaters, and engine mounts. Naturally aspirated, turbocharged, and charge-air cooled versions are rated from 80-227 hp and fitted with mechanical and electronic fuel injection...

Dimming Ballasts work with 1- and 2-lamp long twin tubes.

Mark 10 Powerline electronic dimming ballasts take dimming signals directly from power line, delivering 100%-5% continuous dimming capability. Encased in 9.50 x 1.70 x 1.18 in. housings, models for 1- and 2-lamp long twin tube fluorescent lamp applications feature dedicated voltage of 120/277 V, 60 Hz and can control 36 and 39 W long twin tube lamps in addition to 40 W lamps. All models are...

Time Delay Fuses protect inductive components.

FusetronÃ-® Dual-Element Fuses provide branch circuit, short-circuit, and ground fault protection. When sized properly, they also provide overload protection. Time delay feature makes it possible to use fuse ampere ratings that are much smaller than those of non-time-delay fuses. When used in circuits subject to surge currents such as those caused by motors and transformers, fuses can be...

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.