New Portable Tools Products

Band Saw has 1 x .035 in. x 10 ft, 10-1/2 in. blade.

Kalamazoo AH9AW horizontal wet cutting band saw is designed for wet cutting round and rectangular stock at any angle from 90 to 45 deg, with variable band speed from 62 to 390 fpm. Cutting capacity at 90 deg is 9 in. round and 8 x 13 in. rectangular and at 45 deg is 8 in. round and 8 x 8 in. rectangular. Saw offers swivel vise with 16 in. maximum opening, variable speed drive, 2 HP motor, and 14...

Air Plasma Cutting System produces 1 in. genuine cut.

CutMaster 100 features PCH-102 SureLok(TM) torch with MaximumLife(TM) electrode. IGBT variable power supply delivers up to 80 amps of cutting current. Unit produces 1 in. cut, with no rework or grinding required, at 10 in. per minute on mild steel. Maximum cut rating is 1 1/4 in. and severance cut rating is 1 1/2 in. Extended tip and shield cup allow beveling at angles up to 45 deg. System has...

Liquid/Solids Separators vibrate solids away.

Liquatex(R) Separator uses vibratory motion produced by rotating eccentric weight at machine's center of gravity to remove solids from plant washdown wastewater, lint from laundry wastewater, and solids from cooking oil. Vertical component of motion accelerates breakdown of liquid surface tension, permitting uninterrupted flow of liquid through screen. Horizontal conveying component of motion...

Load Port handles 300 mm semiconductor wafers.

Automated IsoPort(TM) has front-opening-unified-pod (FOUP) tool carrier interface, servo-controlled motion, latchkey, and carrier sensing. Tool throughput is 8 sec, from carrier arrival to first-wafer access. Contamination control conforms to ISO Class 1 particle level, and eliminates triboelectric charge buildup on carrier door. Optional gas purge ports provide an inert ambient environment for...

Expanding Access: How to Get At-Home Medical Tests to Market and Patients

This e-book discusses how to get at-home medical tests to market and patients.

Duct Rodders come in any length.

Available in 1/4, 5/16, 7/16 and 9/16 in. dia, duct rods are supplied in lengths specified by customer. Fiberglass rods, made from E-Glass+ Vinylester, provide high tensile strength and flexibility. Glass-fiber core is reinforced with high-strength resin, and reinforced wrap is added before UV-stabilized, wear-resistant, protective propylene coating is applied. Rods are wound on lightweight,...

Welding Fixture handles prototypes.

With Demmeler modular fixturing system, fixtures for prototypes, specials, spares, or any other short run welding job can be ready in four hours or less. It includes full range of components to fixture virtually any part. Engineering changes are easily handled. Duplicate fixtures can be ready in 20 min.

Hammer Drills are cordless and keyless.

Cordless 14V Model DV14DV and 18V Model DV18DV 1/2 in. hammer drills have impact rates of 0 to 18,000 beats/min (BPM) and 0 to 22,500 BPM, with torque of 346 and 400 lb-in., respectively. With turn of selection dial on head of drill, tools can switch from serving as driver drill to hammer drill. Both have one-touch speed shift knob, adjustable slip-clutch with 22 stages, fan-cooled motors, and...

Bimetal Saw Blade outlasts carbon steel ten times over.

Model 3861 Sandflex(R) NF(TM) bimetal bandsaw blade lasts 8 to 10 times as long as common milled carbon steel blades when sawing wood, plastics, and metals from foundry metals through alloy steels. Bimetal blade has high speed steel teeth beam-welded to spring steel back. Suitable for job shops and tool rooms, blades are available in sizes from 1/4 to 1 in. with 3 to 24 teeth-per-inch pitch.

Laser Systems cut accurately.

Z-1 and Z-2 Laser Cutting Systems combine rigidity and accuracy of VMC with Coherent Diamond-Series CO2 pulsed lasers. Z-1 has 100 W laser and 16 x 12 x 10 in. (XYZ) travel, making it suitable for etching, engraving and cutting small metallic and non-metallic parts. Z-2 has 500 W laser and travels of 40 x 20 x 25 in. Both are available with 4th and 5th axis, providing ability to tackle...

Laser Scribing System is used for photovoltaic panels.

Laser Scribing System provides beam delivery optics with automatic spot size variability, and multiple independent positioned beams. It features granite based, high speed linear motor/encoder X-Y motion systems, straight to within +/- 0.00075 in. over 8 ft of travel. System offers fully automated material handling for parts up to 3 ft x 6 ft. Process generated debris is removed for high...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.