Professional Glue Gun accelerates tackstrip, trim installation.
Designed for installation of tackstrip and metal carpet trim, HOTSHOT™ glue guns feature 250Â- W heaters for accelerated start-up and output of up to 5 1/2 lb of glue per hour (one stick per minute). Detachable stand, full-hand trigger, and Hi-Flow Tip are also standard. Additionally, 828T model includes adjustable thermostat for varying glue formulations and applications. HOTSHOT...
Read More »
Wood Repair Kit helps manufacturers minimize waste.
With KNOT-TEC(TM) Wood Repair Starter Kit, manufacturers have tools needed to begin repairing knots and filling in wooden surfaces. Components are non-flammable, use no harsh solvents, and can be safely used on windows, doors, furniture, wood floors, and cabinets. Supplied in black molded toolbox, kit includes hot melt adhesive glue gun, Mouseplane® for flush trimming of glue lines and...
Read More »
Power Adhesives Introduces Hot Melt Adhesive for Faster, Easier and More Efficient Bonding of Precast Concrete Forms
CHARLOTTE, N.C. - A hot melt adhesive system that's perfect for bonding reveal, chamfer, form liners, weld plates and structural and other architectural elements in all types of pre-cast concrete form is now available from Power Adhesives. Easier, faster and more cost-efficient than any other adhesive type system in the industry, the new Power Adhesive hot melt system consists of a line of...
Read More »
Hot Melt Glue Gun in an Extrusion Model
CHARLOTTE, NORTH CAROLINA - An updated version of its high temperature hot melt glue gun designed for use with polyamides, polyesters and other high temperature adhesives in a variety of industries and applications is now available from PAM Fastening Technology, Inc. Updates include changes that simplify the tool to improve its performance and ease of maintenance. Available in an extrusion model,...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »Hot Melt Cartridge Applicator features 3 mm extension nozzle.
Designed for PUR and other thermoset hot melt cartridges, PAM 700KD uses internal heated chamber to hold 10 oz aluminum cartridge and is available in spray or extrusion model. Digital LED temperature display and controls offer adjustable operating temperature of 100-410°F, while automatic temperature reduction system cools adhesives 100°F for every 20 minutes system is left...
Read More »
Pneumatic Hot Melt Glue Gun meets all packaging needs.
Available in high and low temperature versions, non-flammable TEC(TM) 6100 features fully enclosed heater housing with silicon rubber nozzle shroud and power-on warning indicator light. Two-piece nozzle ensures even and controllable melt rate with smooth molten glue flow. Equipped with twin 250 W steel heaters and up to 500 W of power, gun offers melt rate up to 9 lb/hr. Applicator is suited for...
Read More »Pam Fastening HB-220 Hot Melt Glue Gun System with Adjustable Temperature Range Ideal for Low Production Applications
CHARLOTTE, N.C.- A hot melt glue gun with an adjustable operating temperature range and an advanced trigger mechanism to minimize operator fatigue is available from PAM Fastening Technology, Charlotte, North Carolina. Ideal for low volume production applications, the HB-220 Hot Melt Glue System from PAM Fastening is lightweight and operator friendly. Operating temperatures are adjustable from...
Read More »Hot Melt Glue Gun Systems speed bonding of precast forms.
Applying adhesive in bead or dot format, 400 W all-electric TEC(TM) 3200 uses solid-state plug-in adjustable temperature controller to apply adhesive at temperatures of 202, 319, or 355°F at melt rates up to 5Â-½ lb/hr. Requiring compressed air and electricity to operate, 500 W self-contained TEC(TM) 6300 reaches max operating temperature of 356°F in 10 min and can deliver up to...
Read More »Applicator Guns suit flat panel gluing applications.
Featuring FP-900 swirl gun, Rhino® pump, hose, and suspension package, FP-900 Handguns facilitate manual application of ambient-temperature, moisture-cure adhesives in horizontal or vertical flat panel processes. Guns offer 360° rotation and allow both left- or right-handed operation. Selection of nozzles provides pattern flexibility, while external mix design maintains positive...
Read More »Hot Melt Glue Gun provides up to 9 lb/hr of melt rate.
TEC(TM) 6100 high output pneumatic hot melt glue gun features fully enclosed heater housing with silicon rubber nozzle shroud for user safety, power-on warning indicator light, PTFE barrel, and non-stick coated piston. Controllable melt rate with 2-piece flow nozzle enables smooth molten glue flow. Loaded with 1Â-¾ in. adhesive cartridges, gun comes with twin 250 W steel heaters, up to 500 W...
Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.
Read More »
